PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking Course

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job. This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.

Attendees to TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Accessing the Network
Advanced Fuzzing Techniques
Advanced Stack Smashing
Attacking the Windows Domain – Enumeration
Attacking the Windows Domain – Restricted Desktops
Attacking the Windows Domain – The Attacks
Building a Metasploit Module
Crypto for Penetration Testers
Exploiting the Network
Fuzzing Introduction and Operation
Introduction to Memory and Dynamic Linux Memory
Introduction to Windows Exploitation
Manipulating the Network
Python and Scapy For Penetration Testers
Shellcode
Smashing the Stack
Windows Heap Overflow Introduction
Windows Overflows

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, Networking, and Security Experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: ryanv

Instructor comments: Great.

Facilities comments: N/A. Hotel.

User: sean.hollinger

Instructor comments: Instructor is technically knowledgeable as he has been on every course I've taken with TechNow.

Facilities comments: adequate

Liked the class? Then let everyone know!

PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content. This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications. Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration: 2 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

Module 0 – Introduction & Overview
Mod 1: Advanced Interface
- Configuration
- Advanced NAT
- Policy-Based
- Forwarding
- Routing Protocols (OSPF)
Mod 2: App-ID™ –
- Custom Applications
- Defining New Application Signatures
- Application Override
Mod 3: Advanced Content-ID™
- Custom Threat Signatures
- Data Filtering
- DoS Protection
- Botnet Report
Mod 4: Advanced User-ID™
- Terminal Server Agent
- Captive Portal
- XML API

Day 2

Mod 5: Quality of Service
- Configuring Quality of Service
Mod 6: GlobalProtect™
- Implementation of GlobalProtect
- Install and Configure Portal, Gateway, and Agents
Mod 7: Monitoring and Reporting
- Log Forwarding
- SNMP
- Reporting
Mod 8: Active/Active High Availability
- Configuring Active/Active HA

Prerequisites:

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-812: Information Systems Security Engineering Professional (ISSEP)

Course Overview:

This concentration was developed in conjunction with the U.S. National Security Agency (NSA) providing an invaluable tool for any systems security engineering professional. CISSP®-ISSEP is the guide for incorporating security into projects, applications, business processes, and all information systems. Security professionals are hungry for workable methodologies and best practices that can be used to integrate security into all facets of business operations. The SSE model taught in the IATF portion of the course is a guiding light in the field of information security and the incorporation of security into all information systems.

Attendees to TN-812: Information Systems Secuirty Engineering Professional (ISSEP) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Systems Security Engineering
Certification and Accreditation
Technical Management
U.S. Government Information Assurance Governance

Prerequisites:

CISSP

Comments

Latest comments from students

User: fsarisen

Instructor comments: Thank you Tim for all the great information! I am confident that I'll do well on the ICND exam.

User: storoy30

Instructor comments: The instructor, Tim Burkard, was very knowledgeable on the course material and skilled at explain more complex ideas.

Liked the class? Then let everyone know?

TN-555: Certified Ethical Hacker v13 (CEH)

Course Overview:

This CEH course will immerse you into a “Hacker Mindset” in order to teach you how to think like a hacker and better defend against future attacks. Students are in the driver’s seat with a hands-on training environment employing a systematic ethical hacking process. All while teaching students how to scan, test, hack, and secure target systems. CEH shows how hackers think and act maliciously so you can learn to better position your organization’s security infrastructure and defend against future attacks.

This CEH course covers the Five Phases of Ethical Hacking, diving into Reconnaissance, Gaining Access, Enumeration, Maintaining Access, and covering your tracks.

This CEH course delivers in-demand ethical hacking skills while preparing you for the internationally-recognized Certified Ethical Hacker (CEH) certification exam from EC-Council.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

What’s Included:

EC-Council official E-Courseware
EC-Council official iLabs code with access for 6 months
EC-Council official Certificate of Attendance
CEH Exam Voucher

Security Course Flow

Dates/Locations:

Date/Time	Event
02/24/2025 - 02/28/2025 08:00 -16:00	TN-555: Certified Ethical Hacker v13 (CEH) TechNow, Inc, San Antonio TX
05/19/2025 - 05/23/2025 08:00 -16:00	TN-555: Certified Ethical Hacker v13 (CEH) TechNow, Inc, San Antonio TX
08/11/2025 - 08/15/2025 08:00 -16:00	TN-555: Certified Ethical Hacker v13 (CEH) TechNow, Inc, San Antonio TX
11/17/2025 - 11/21/2025 08:00 -16:00	TN-555: Certified Ethical Hacker v13 (CEH) TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Content:

Module 01. Introduction to Ethical Hacking
Module 02. Foot-printing and Reconnaissance
Module 03. Scanning Networks
Module 04. Enumeration
Module 05. Vulnerable Analysis
Module 06. System Hacking
Module 07. Malware Threats
Module 08. Sniffing
Module 09. Social Engineering
Module 10. Denial-of-Service
Module 11. Session Hijacking
Module 12. Evading IDS,Firewalls, and Honeypots
Module 13. Hacking Web Servers
Module 14. Hacking Web Applications
Module 15. SQL Injection
Module 16. Hacking Wireless Networks
Module 17. Hacking Mobile Platforms
Module 18. IoT and OT Hacking
Module 19. Cloud Computing
Module 20. Cryptography

Prerequisites:

Windows operating system and/or Linux operating system or other Unix-based OS
TCP/IP protocols and implementation
At least 2 years of IT security experience
TN-325:Security+

Target Audience:

Information Security Analyst/Administrator, Information Assurance (IA) Security Officer, Information Security Manager/Specialist, Auditors, Security Professional, Site Admins, Penetration Testers, Red Team,Risk/Threat/Vulnerability Analyst, Individuals concerned about the integrity of network infrastructure

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students