Course Overview: PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course combines PA-213 and PA-212 and adds a half day introduction to Panorama and Troubleshooting.  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-232: Palo Alto Networks Panorama Manage Multiple Firewalls. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications. Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration 5 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  Additionally Panorama and Troubleshooting are addressed.

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students



User: rod3535@gmail.com

Instructor comments: Instructor was great, he explained everything and made sure we understood the process's/product. He also took time out of his own schedule to help set up a VM environment on our personal pc's.

Facilities comments: Facility was great, enjoyed feeding the deers!


Like the class?  Then let everyone know!

Course Overview:

This concentration was developed in conjunction with the U.S. National Security Agency (NSA) providing an invaluable tool for any systems security engineering professional. CISSP®-ISSEP is the guide for incorporating security into projects, applications, business processes, and all information systems. Security professionals are hungry for workable methodologies and best practices that can be used to integrate security into all facets of business operations. The SSE model taught in the IATF portion of the course is a guiding light in the field of information security and the incorporation of security into all information systems.

Attendees to TN-812: Information Systems Secuirty Engineering Professional (ISSEP) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Systems Security Engineering
  • Certification and Accreditation
  • Technical Management
  • U.S. Government Information Assurance Governance

Prerequisites:

Comments

Latest comments from students


User: fsarisen

Instructor comments: Thank you Tim for all the great information! I am confident that I'll do well on the ICND exam.


User: storoy30

Instructor comments: The instructor, Tim Burkard, was very knowledgeable on the course material and skilled at explain more complex ideas.


Liked the class?  Then let everyone know?

Course Overview:

This course is very hands-on with respect to SP 800-53 controls as related to ICD-503, leveraging experience with DCD 6/3, and incorporating a broad array of technologies found in the field.  Assessors and Auditors have to face many technologies that are not part of the main stream.  TechNow has gone to great efforts to build a very broad, comprehensive, and complex lab to simulate many scenarios and architectures.  Technologies such as a network appliance that is not a typical infrastructure product, a radio/satellite communications device, or many other technologies that build up a weapon system.  Students learn how controls are integrated into many different devices and how they fit in the overall security architecture of monitoring, reporting, and compliance testing.

Directly discussed are overlays for different requirements i.e.: tactical, medical, network type: JWICS, SIPR; IC or AF.  TechNow has developed a funnel concept to overlays to exemplify the encapsulation of a control within different requirements.  TechNow has over 15 years experience in Trusted Solaris/Trusted Extensions and labeled security.  Cross Domain overlays are presented that fits the work flow of an assesor.  PII overlays and any overlays that an organization uses and can be made available are also presented.  

This course allows the student to leverage years of experience in DoD DCD 6/34 for transition to the Risk Management Framework (RMF) applied to the Intelligence Community as mandated by ICD 503.  Utilizing NIST SP 800-37 to establish a baseline of RMF knowledge, the student learns how to integrate the NIST pubs to provide cohesive information assurance architectures and compliance.  ICD 503 scorecard evaluations are integral in demonstrating a successful ICD 503 compliance program.  TechNow's ICD 503 course provides students with the skill to assess security programs and evaluate ICD 503 compliance to build an improvement and sustainable program for score consistency.  TechNow's instructors have unparralleled expertise in federal compliance initiatives, and we bring this expertise instructing students on the complete life cycle of RMF.

More than a simple checklist, we instruct students not only how to validate essential security controls, programs, and metrics, but that they are operating effectively.  The student leaves the course knowing how to: identify gaps where controls, programs, or metrics are incomplete, missing or ineffective, and provide actionable findings and recommend remediation strategies.  Students learn to internalize NIST pubs to meaningul and effective IA guidelines and work with the Body of Evidence templates which include: Risk Assessment Report (RAR), Systems Security Plan (SSP), Security Assessment Report (SAR), and Plans of Action and Milestone (POAM).

TechNow training materials are aligned with the most recent set of National Institute of Standards and Technology (NIST), Committee on National Security Systems (CNSS), and Office of the Director of National Intelligence (ODNI) policies standards, processes, policies and instructions to be addressed/explained include ICD 503, ICS 503-1, ICS 500-16, ICS 500-18, ICS 500-27, ICD 502, NIST SP 800-37, NIST SP 800-30, NIST SP 800-53, NIST SP 800-53A, NIST SP 800-137, NIST SP 800-47, CNSSP 22, CNSSI 1253, and CNSSI 4009.

A majority of time is spent on in-depth compliance review of NIST SP 800-53 controls.  Instruction discusses which method should be used to test and validate each security control and what evidence should be gathered.  This course is not theory or death by power point.  Real scenarios are presented as exercises.  A complete live cyber range simulating the IC is utilized for hands-on labs for techniques of validating and documenting compliance of NIST SP 800-53 controls as related to ICD 503.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Establish a baseline of RMF knowledge
  • Validate essential security controls, programs, and metrics
  • DoD DCD 6/3 to ICD 503 Transition
  • Lab Environtment and the Cyber Range
  • Overlays: Tactical, Medical, Network type(JWICS, SIPR; IC or AF), Cross Domain, PII
  • Risk Assessment Report (RAR)
  • Systems Security Plan (SSP)
  • Security Assessment Report (SAR)
  • Plans of Action and Milestone (POAM)

Prerequisites:

Experience in the field of auditing and assesments.

Comments

Latest comments from students


Liked the class?  Then let everyone know!

 

Course Overview:

This course teaches students how to use the powerful PERL programming language, focusing on hands-on labs to promote retention & challenge students to apply their skills to new situations. PERL is a flexible, easy to use language suitable for many tasks such as system administration, web applications & database integration. System administrators, web programmers & database administrators will benefit from mastering this powerful programming language. This course reviews & builds on the information presented in PL-115: Fundamentals of Computer Programming.

Attendees to P-245: Programming with PERL will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Introduction
  • Scalar Data
  • Lists & Arrays
  • Subroutines
  • Input & Output
  • Hashes
  • In the World of Regular Expressions
  • Matching with Regular Expressions
  • Processing Text with Regular Expressions
  • More Control Structures
  • File Tests
  • Directory Operations
  • Strings & Sorting
  • Process Management
  • PERL Modules
  • Some Advanced PERL Techniques

Prerequisites:

Comments

Latest comments from students


 

Liked the class?  Then let everyone know!

Course Overview:

This course is developed for those individuals seeking to pass the Project Management Institute’s PMP certification exam, as well as any individual who has attended any Project Management Certification program in the past and needs to brush up on the material needed to pass the PMP exam.

Attendees to PM-325: Project Management Professional (PMP) Exam Preparation will receive official PMI (Project Management Institute) course materials and expert instruction from an official PMI Instructor.

TechNow Inc. is an official Authorized Training Partner of The Project Management Institute (PMI).

 

Dates/Locations:

Date/Time Event
02/10/2025 - 02/14/2025
08:00 -17:00
PM-325: Project Management Professional (PMP) Exam Preparation
TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

  • Project Initiation
  • Examining the Project Management Framework
  • Examining the Project Management Processes
  • Implementing Project Integration Management
  • Managing the Project Scope
  • Introducing Project Time Management
  • Introducing Project Cost Management
  • Introducing Project Quality Management
  • Introducing Project Human Resource Management
  • Introducing Project Communications Management
  • Introducing Project Risk Management
  • Introducing Project Procurement Management
  • PMP Code of Professional Conduct

Prerequisites:

A Bachelor’s degree & 4,500 hours of project management experience over 3 years/36 months.

OR

7,500 hours of project management experience over 5 years/60 months (if NO degree).

AND

Complete & submit the PMP certification application directly to PMI

Comments

Latest comments from students


Liked the class?  Then let everyone know!