DoD 8570

DoD 8570 Training

The Department of Defense requires that all information assurance personnel must become compliant with IT and security certification standards.

DoD 8570 training, also called Information Assurance training, is available through TechNow to provide you with the certification that is required.  Your DoD 8570 training  ( information assurance training ) at TechNow will provide you with all of the courses necessary to receive your DoD 8570.01-M certification.

Ongoing open enrollment through TechNow is availble for our DoD 8570.01-M courses.

Please review the full & updated DoD approved IA baseline certifications aligned to each category & level of the IA workforce:

Note: The Certifications in red are recently added to approved list as of 2/4/19

For further information or to schedule for classes, call us at 800-324-2294

in   

N-405: ROUTE-Implementing Cisco IP Routing

Course Overview:

In this course, administrators of medium-to-large network sites will learn to use advanced routing to provide scalability for Cisco routers that are connected to LANs and WANs. Networking professionals will learn to dramatically increase the number of routers and sites using these techniques instead of redesigning the network when additional sites or wiring configurations are added. Hands-on labs ensure you thoroughly understand how to implement advanced routing within your network.

Attendees to N-405: ROUTE-Implementing Cisco IP Routing will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Planning Routing Services to Requirements
  • Implementing an EIGRP-Based Solution
  • Implementing a Scalable Multiarea Network
  • OSPF-Based Solution
  • Implement an IPv4- Based Redistribution Solution
  • Implementing Path Control Connection of an Enterprise Network to an ISP Network

Prerequisites:

  • None

 

Comments

Latest comments from students

User: jrtrussell

Instructor comments: Awesome

Facilities comments: Awesome

Liked the class?  Then let everyone know!

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-335: Advanced Penetration Testing Using Open Source Tools

Course Overview:

This is an advanced course that assumes the attendee is a qualified security professional with experience using security tools and understands the concepts behind penetration testing. Courses that build up the expertise that enables a student to succeed in this course is Security+, CEH, CISSP, and any of the GIAC certifications. This course is completely hands-on and utilizes the BackTrack tool suite from backtrack-linux.org. The course covers, in detail, various attacks and tools that are contained in the BackTrack tool suite.

Attendees to TN-335: Advanced Penetration Testing Using Open Source Tools will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Information Security and Open Source Software
  • Operating System Tools
  • Firewalls
  • Scanners
  • Vulnerability Scanners
  • Network Sniffers
  • Intrusion Detection Systems
  • Analysis and Management Tools
  • Encryption Tools
  • Wireless Tools
  • Forensic Tools
  • More on Open Source Software

Prerequisites:

  • Experience in IT Security
  • Solid basic knowledge of networks and TCP/IP
  • Experience in command line under Linux and Windows is required

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-901: Linux for Security Professionals

Course Overview:

This course will be fast paced with in-depth and live demonstrations.

Date/Locations:

No Events

Duration: 1 day

Course Objectives:

  • AIDE
  • DNS Security with DNSsec
  • Logging and Audit Management
  • Linux Security Modules and SE-Linux
  • Linus Containers (Jailing Services and Apps)
  • SSH and SSL tunneling

Prerequisites:

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!