PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

N-595: VoIP Security Analysis and Design

Course Overview:

As VoIP (Voice-over IP) is integrated into the operations of many missions, it is imperative to understand its security ramifications.  In the N-595: VoIP Security Analysis and Design class the objectives are designed for those who are chartered with the responsibility of securing networks and application environments that incorporate VoIP.   Topics include how VoIP works, its interactions with the network, its vulnerabilities and mitigations.  Focus is on leading open source and proprietary technologies utilizing Asterisk and Cisco and the protocols SIP, H.323, RTP, MGCP, and Skinny.  Other protocols such as Nortel's UNIStim will be addressed.  As for Cisco, security pieces in the VoIP CallManager servers, Catalyst switches, IOS-based routers, and ASA firewalls, amounts to several different platforms, each with its own management interface and lockdown procedures.   Various open source tools including those in BackTrack are used for VoIP attacks.  A task list of actions for securing enterprise VoIP is carried out in hands-on labs, performed on Cisco phones, routers, switches, and ASA firewalls.

Attendees to N-595: VoIP Security Analysis and Design will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • VoIP Architecture
  • VoIP Signaling and media protocols
  • Common VoIP authentication mechanisms
  • Common VoIP encryption techniques
  • VoIP protocol analysis with Wireshark
  • Maintaining QoS while mitigating DoS
  • VoXML, XML, and application integration security
  • Converged network security design and implementation
  • Impact of NAT and firewalls
  • SIP, H.323, and MGCP vulnerabilities
  • VPN, IPsec and SRTP to secure VoIP services
  • Penetration testing with open source tools
  • Attacks for Eavesdropping, call redirection, and DoS
  • Design of hacked firmware virtualization layer
  • Concise lockdown steps for network hardware and VoIP

Prerequisites:

  • This is an advanced Information Security Course which requires basic Windows & UNIX competency
  • Certification or 2 years of experience in these operating systems is highly recommended
  • As well as an understanding of TCP/IP

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-969: Windows Security Administrator Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.  This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs to secure Windows systems. Lecture and labs start with quick review of Active Directory and group policy to enforce security mechanisms within the Windows architecture.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations.  PowerShell is made for SecOps/DevOps automation and students will learn to write PowerShell scripts to automate security operations and Desired State Configuration (DSC).  The course concludes with exercising real attack strategies to demonstrate the effectives of properly securing your host.

Attendees to TN-969: Windows Security Administrator course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Active Directory and BloodHound
  • Security Controls
  • PKI
  • Encryption
  • Wireless & Network Security and Hardening DNS
  • 802.1x and Endpoint Protection
  • Firewalls and VPN
  • PowerShell Scripting
  • JEA, DSC, Enterprise Security with PowerShell
  • Windows Attack Strategies

Prerequisites:

  • Security+
  • Windows System Administration Skills

 

Comments

Latest comments from students

User: bbrabender

Instructor comments: Instructor was very knowledgeable and help more inexperienced users with concepts as well explaining in a way that can be understood.

Facilities comments: N/A

User: dale.r.anderson

Instructor comments: Instructor was well knowlegeable accross alot of domains.

Facilities comments: Pretty good

Liked the class?  Then let everyone know!

RH-345: Red Hat JBoss Application Administration I

 
 

Course Overview:

 

Install, configure, and manage Red Hat JBoss Enterprise Application Platform

Red Hat JBoss® Application Administration I teaches you the best practices for installing and configuring Red Hat JBoss Enterprise Application Platform 6. Through hands-on labs, learn the essential, real-world tasks that a system administrator needs to know to effectively deploy and manage applications on JBoss Enterprise Application Platform.

Attendees to RH-345: Red Hat JBoss Application Administration I, will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Duration: 5 Days

Course Objectives:

  • Overview of JBoss Enterprise Application Platform
  • Configure JBoss Enterprise Application Platform in standalone mode
  • Configure JBoss Enterprise Application Platform in domain mode
  • Configure servers
  • Use the CLI tool
  • The datasource subsystem
  • The logging subsystem
  • The messaging subsystem
  • The security subsystem
  • JVM configuration
  • Migrating applications to JBoss Enterprise Application Platform 6
  • The web subsystem

Prerequisites:

  • Linux System Administration

Comments

Latest comments from students

 

  

Liked the class?  Then let everyone know!

TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class?  Then let everyone know!