PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-939: Hacker Techniques, Exploits, and Incident Handling Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the exam.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations. The course concludes with exercising real attack strategies to demonstrate the techniques acquired throughout the course.

Attendees to TN-939:  Hacker Techniques, Exploits, and Incident Handling will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 9 days

Course Objectives:

  • Backdoors & Trojan Horses
  • Buffer Overflows
  • Covering Tracks: Networks
  • Covering Tracks: Systems
  • Denial of Service Attacks
  • Exploiting Systems Using Netcat
  • Format String Attacks
  • Incident Handling Overview and Preparation
  • Incident Handling Phase 2: Identification
  • Incident Handling Phase 3: Containment
  • Incident Handling: Recovering and Improving Capabilities
  • IP Address Spoofing
  • Network Sniffing
  • Password Attacks
  • Reconnaissance
  • Rootkits
  • Scanning: Host Discovery
  • Scanning: Network and Application Vulnerability scanning and tools
  • Scanning: Network Devices (Firewall rules determination, fragmentation, and IDS/IPS evasion)
  • Scanning: Service Discovery
  • Session Hijacking, Tools and Defenses
  • Types of Incidents
  • Virtual Machine Attacks
  • Web Application Attacks
  • Worms, Bots & Bot-Nets

Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: m_jurrens

Instructor comments: Both instructors Mr. Askey and Mr. Hackney, were very good. the open learning environment was extremely productive and I felt we all learned far more that we ever would out of a structured rote memorization course.

User: natebonds

Instructor comments: Both Mr. Askey and Hackney were extremely knowledgeable. They were also extremely interested in helping each student learn. I was particularly impressed with the way they tailored the course to optimize our time since we weren't testing. I feel like I know much much more than I did when the class started.

Facilities comments: The facilities were fine. I would have preferred it be closer to Lackland.

Liked the class?  Then let everyone know!

TN-979: Intrusion Analyst Course

Course Overview:

Intrusion Analyst is a hands-on course that covers intrusion detection in-depth. This includes concepts such as the use of Snort, network traffic analysis, and IDS signatures.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of packet and intrusion analysis.

Attendees to TN-979: Intrusion Analyst will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Advanced Snort Concepts
  • Analyst Toolkit
  • Domain Name System (DNS)
  • Examining Packet Crafting
  • Examining Packet Header Fields
  • Fragmentation
  • ICMP Theory
  • IDS Interoperability
  • IDS Patterns
  • IDS/IPS Management & Architecture Issues
  • Indications, Warnings & Traffic Correlation
  • IPv6
  • Microsoft Protocols
  • Network Traffic Analysis
  • NIDS Evasion, Instertion & Checksums
  • Snort Fundamentals & Configuration
  • Snort GUIs & Sensor Management
  • Snort Performance, Active Response & Tagging
  • Snort Rules
  • Stimulus Response
  • TCPdump Fundamentals
  • TCP/IP Fundamentals
  • Wireshark Fundamentals
  • Writing TCPdump Filters

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: Tosha

Instructor comments: Dave was an excellent instructor. He is very informative and knowledgeable in the course and the material. I have enjoyed the class and I would take another course with him as the instructor.

Facilities comments: Very nice and clean hotel.

User: buckey26

Instructor comments: Dave was one of the best instructors I have ever had for a tech course. He broke down everything to the point where you can understand it internally.

Liked the class?  Then let everyone know!

Security Course Flow

We are often asked what is the recommended sequence of classes.  Here is our recommended sequence of classes for The Security Field.

Certified Information Security Manager (CISM)

CT-325 CompTIA Security+ Arrowright TN-825 Certified Information Security Manager

Certified Information Systems Auditor(CISA)

CT-325 CompTIA Security+ Arrowright TN-425 Certified Ethical Hacker Arrowright TN-822: Certified Information Systems Auditor (CISA)

Certified Information Systems Security Professional(CISSP)

CT-325 CompTIA Security+ Arrowright TN-425 Certified Ethical Hacker Arrowright TN-815 CISSP Certification Prep Seminar

 

TN-315: Complete Hack and Defend

 

Course Overview:

Learn to protect yourself and your company against hackers, by learning their tools and techniques, and then testing your network.  This course is heavily based on Kali and primarily on Metasploit.  In TN-315: Complete Hack and Defend class you will learn the step by step process that hackers use to assess your enterprise network, probe it & hack into it in mixed-platform environment including Windows, Linux, Solaris, and Cisco.  This course is 90% hacking, but  defenses for demonstrated hacks will be discussed.  If you want to know the ins and outs of the hacks presented in this course, then this is the course for you.

Attendees to TN-315: Complete Hack & Defend Class Attendees will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Introduction to Pen Testing using the PTES model
  • Metasploit Basics
    • MSFconsole, MSFcli, Armitage, MSFpayload, MSFencode, NasmShell
  • Intelligence Gathering
    • Nmap, Databases in Metasploit, Port Scanning with Metasploit
  • Quick Intro to Ruby
    • Writing a simple Ruby script to create a custom scanner
  • Vulnerability Scanning
    • Importing Nessus Results
    • Scanning with Nessus from Within Metasploit
  • Exploitation
    • Using the Metasploit Framework and console to exploit
  • Meterpreter
    • Compromising a Windows System
    • Attacking MS SQL, xp_cmdshell
    • Dumping Usernames and Passwords, extracting and dumping hashes
    • Pass the Hash and Token Impersonation
    • Pivoting
    • Railgun
    • Using Meterpreter Scripts: Migrating a process, Killing AV, Persistence
  • Avoiding Detection
    • Creating Stand-Alone Binaries with MSFpayload
    • Encoding with MSFencode and Packers (go Green Bay:)
  • Exploitation Using Client Side Attacks
    • Introduction to Immunity Debugger
    • Using Immunity Debugger to Decipher NOP Shellcode
  • Metasploit Auxiliary Modules
  • Social Engineer Toolkit (SET)
    • Spear-Phishing, Web Attack
    • Creating a Multipronged Attack
  • Creating Your Own Module
    • Adapt an existing Module
    • Add some PowerShell and Run the Exploit
  • Meterpreter Scripting
  • Capture The Flag Exercise

Prerequisites:

  • This is an advanced Information Security Course which requires basic Windows & UNIX competency
  • Certification or 2 years of experience in these operating systems is highly recommended
  • An understanding of TCP/IP

Comments

Latest comments from students

User: dhonore

Instructor comments: Dave's presentation style is engaging and lively.

Facilities comments: The room was adequate for the needs of the class.

User: phouck

Instructor comments: David was very good. Although he went very fast at times.

Facilities comments: The room was ok. it was bit dark.

 

Liked the class?  Then let everyone know!