PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-8155: HCISPP Preparation Seminar

 

Course Overview:

The HCISPP is the only certification that combines cybersecurity skills with privacy best practices and techniques. It demonstrates you have the knowledge and ability to implement, manage, and assess security and privacy controls to protect healthcare organizations using policies and procedures established by the cybersecurity experts at (ISC)2. TechNows HCISPP Certification Boot Camp is a comprehensive review of Healthcare cybersecurity with privacy best practices & industry best practices.

Attendees to TN-8155: HCISPP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction..

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Strategically focus your preparation for HCISPP Certification
  • Cover a broad spectrum of topics in the 7 domains of the HCISPP Common Body of Knowledge (CBK)
  • Gain knowledge on the Healthcare industry including third party relationships and health data management concepts
  • Identify applicable regulations, compliance frameworks, privacy principles and policies to protect information security
  • Develop risk management methodology and identify control assessment procedures

Audience:

  • The HCISPP certification is ideal for security professionals responsible for safeguarding protected health information (PHI). Take this HCISPP training course to prepare to manage and implement security controls for healthcare information. HCISPPs are instrumental to a variety of job functions: Compliance Officer, Information Security Manager, Privacy Officer, Compliance Auditor, Risk Analyst, Medical Records Supervisor, IT Manager, Privacy & Security Consultants, and Health Information Manager.

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

Test2

  

http://technow.www162-254-253-232.a2hosted.com/palo-alto-firewall-essentials-fasttrack-training-class-course-pa-215/

  

Course Overview:

PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-222: Palo Alto Networks Panorama Essentials.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications.

Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:  

Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

  

Like the class?  Then let everyone know!

VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives

 

Course Overview:

This course explores the VMware Infrastructure and related security, which consists of VMware ESX Server & VMware Virtual Center Server. We will look at both the design environments and operational processes of the VMware Infrastructure including security. This course provides IT architects with the insight needed to tackle tough issues in server virtualization such as virtual machine technologies, storage infrastructure, and designing clustered environments with security practices included. Extensive hands-on labs provide for a rich student experience.

Hypervisors and their supporting environment require attention to security due to the aggregated risk of hosting multiple virtual servers. This course explores the security of virtualized environments. Student configure ESXi by learning to manage the security and risk between ESXi, virtual servers and security integration of ESXi to the physical network infrastructure including appropriate segregation from other sensitive networks and management networks. How to configure virtual networks when some hosts are dual or multi homed, but internally segregate between the two or more connected networks with different security levels. Appropriate integration of zero-clients and thin clients. Configuration of defensive measures on hosts, servers, hypervisors within the virtual environment and practices for those guarding it externally. Integration of Active Directory and other AAA/CIA related services relative to a virtualized environment.

Students are also walked through DoD ESXi Security Technical Implementation Guide (STIG). Introduction to the impact of Intel Trusted Execution Technology integrated with ESXi to create a trusted platform for virtual machines. Additionally the instructor walks the students through NIST Special Publication 800-125A: Security Recommendations for Hypervisor Deployment on Servers, and NIST Special Publication 800-125B: Secure Virtual Network Configuration for Virtual Machine (VM) Protection.

Attendees to “VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives” will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

• Virtual Infrastructure Overview
• ESX and ESXi Server Installation
• Configuration of Networking, Scalability and Security
• Storage
• Install and Configure vCenter Server and Components
• Creation, Deployment, Management, and Migration of Virtual Machines
• Utilize vCenter Server for Resource Management
• Utilize vCenter Server for Virtual Machine Access Control and User Managment
• Use vCenter Server to increase scalability
• Monitoring Your Environment
• Data & Availability Protection Troubleshooting
• Use VMware vCenter Update Manager to apply ESXi patches
• Use vCenter Server to manage vMotion, HA, DRS and data protection.

TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class?  Then let everyone know!