PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations:

No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

cheddarcon-powershell-threat-hunting-registration

    After you press "Request Registration" near the bottom of this form, within 30 seconds, status will be provided at the bottom of the form, you will also be contacted by phone for credit card information.

    Tech Now is pleased to have the opportunity to provide you training for "Windows Security Automation and Threat Hunting with PowerShell” at CheddarCon 2018!

    Scroll down to see the course description.

    First Name*

    Last Name*

    Your Email*

    Your Organization*

    Phone*

    Questions:

    After you press "Request Registration" on this form, within 30 seconds, status will be provided at the bottom of the form, you will also be contacted by phone for credit card information.

    Windows Security Automation and Threat Hunting with PowerShell Seminar

    Location: 400 W Wisconsin Ave, Milwaukee, WI 53203, USA

    Date: October 10, 2018 8:00am – 4:00pm

    Duration: 8 hours

    Audience: Cyber Security professionals and Windows administrators

    Attendees Environment: Laptops not required, but suggested to have better hands-on absorption of subject matter.

    Description:
    PowerShell is both a command-line shell and scripting language. Fight fires quickly using existing or custom PowerShell commands or scripts at the shell. PowerShell is made for Security Operations (SecOps) automation on Windows. This seminar does not require prior programming skills. The seminar focuses on PowerShell programming, giving a beginner skills to be productive in windows scripting to automate tasks and also remediate problems.

    Cyber Security is the objective of this seminar, and the PowerShell examples will demonstrate PowerShell capabilities that help lock down a Windows system and also report security status.

    Objectives:

    PowerShell Overview

    • Getting started running commands
    • Security cmdlets
    • Using and updating the built-in help
    • Execution policies
    • Fun tricks with the ISE graphical editor
    • Piping .NET and COM objects, not text
    • Using properties and methods of objects
    • Helping Linux admins feel more at home
    • Aliases, cmdlets, functions, modules, etc.

    PowerShell Utilities and Tips

    • Customizing your profile script
    • PowerShell remote command execution
    • Security setting across the network
    • File copy via PowerShell remoting
    • Capturing the output of commands
    • Parsing text files and logs with regex patterns
    • Parsing Security Logs
    • Searching remote event logs
    • Mounting the registry as a drive
    • Security settings in the Registry
    • Exporting data to CSV, HTML and JSON files
    • Running scripts as scheduled jobs
    • Continued Security Compliance
    • Pushing out scripts through Group Policy
    • Importing modules and dot-sourcing functions
    • http://www.PowerShellGallery.com

    PowerShell Scripting

    • PowerShell Scripting to implement Security Practices
    • Writing your own functions to automate security status and settings
    • Passing arguments into your scripts
    • Function parameters and returning output
    • Flow control: if-then, foreach, that make security decisions
    • How to pipe data in/out of your scripts for security compliance and reporting

    Attendees to this seminar, Windows Security Automation and Threat Hunting with PowerShell, will receive TechNow approved course materials and expert instruction.[/wr_text][/wr_column][/wr_row]

    TN-905: Cyber Threat Intelligence Analysis

     

    Course Overview:

    TechNow has worked worldwide enterprise infrastructures for over 30 years and has developed demos and labs to exemplify the techniques required to demonstrate technologies that effectively support CTI.  This course integrates well with our courses TN-575: Open Source Network Security Monitoring and TN-865: Wireshark Network Traffic and Security Analysis .

    TechNow develops Cyber Ranges and makes them available for conferences in support of annual meetings for Cyber Threat Response Teams.  Developing scenarios and reacting to them appropriately is a big part of the value in understanding the contexts required to comprehend valuable CTI.   As with many advanced TechNow security courses, there is a large hands-on ratio.  This course helps Cyber Protection Teams (CPT), Defensive Cyber Operations (DCO), and Mission Defense Teams (MDT) to collect, analyze and apply targeted cyber intelligence to defensive operations in order to proactively act on and tune response to attacks by cyber adversaries.  CPT, DCO, and MDT can take preemptive action by utilizing CTI, understanding CTI tools, techniques and procedures (TTPs) needed to generate and consume timely and relevant intelligence to improve resilience and prevention.

    This course focuses on the collection, classification, and exploitation of knowledge about adversaries and their TTPs. .  MDT puts us close the mission and helps define the internal context to be analyzed against the CTI.  TechNow pushes the student to truly understand how to think about and use CTI to make a difference.

    Attendees to TN-905: Cyber Threat Intelligence Analysis will receive TechNow approved course materials and expert instruction.

    Date/Locations:

    No Events

    Course Duration: 5 days

    Course Objectives:

    • Learn to comprehend and develop complex scenarios
    • Identify and create intelligence requirements through practices such as threat modeling
    • Utilize threat modeling to drive intelligence handling and practices 
    • Breakdown tactical, operational, and strategic-level threat intelligence
    • Generate threat intelligence to detect, respond to, and defeat focused and targeted threats
    • How to collect adversary information creating better value CTI
    • How to filter and qualify external sources, mitigating low integrity intelligence
    • Create Indicators of Compromise (IOCs) in formats such as YARA, OpenIOC, and STIX
    • Move security maturity past IOCs into understanding and countering the behavioral tradecraft of threats
    • Breaking down threats mapped against their tradecraft to tweak IOCs
    • Establish structured analytical techniques to be successful in any security role
    • Learn and apply structured principles in support of CTI and how to communicate that to any security role.

    Course Prerequisites:

    Comments

    Latest comments from students

     

    Liked the class?  Then let everyone know!

    PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231)

      

     

    Course Overview:  PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231) Training Class is a two-day course that teaches students strategies in defense against cyberthreats.  Successful completion of this course enables administrators to better understand the threat landscape.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

    Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

    The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

    Attendees to the PA-242: Palo Alto Networks Firewall Manaage Cyberthreats  (EDU-231) Training Course will receive TechNow approved course materials and expert instruction.

    Dates/Locations:

    No Events

    Duration: 2 days

    Course Objectives:   Students attending this training course will gain an understanding of cyberthreats and their characteristics.  Students will learn how to manage cyberthreats using security policies, profiles, and signatures to protect their network against emerging threats.

    Day 1

    • Mod 1: Threat Landscape
      • Advanced Persistent
      • Threats
      • Data Breaches and Tactics
      • Threat Management
      • Strategies
    • Mod 2: Integrated
      • Approach to Threat
      • Protection
      • Integrated Approach to
      • Protection
      • Next-Generation Firewall
      • Advanced Endpoint
      • Protection
    • Mod 3: Network Visibility
      • Zero Trust Model
      • SSL Decryption
      • Decryption Policy
    • Mod 4: Reducing the Attack
      • Surf
      • ection

     

    Day 2

    • Mod 5: Handling Known
      • Threats
      • WildFire Analysis
      • Security Profiles
    • Mod 6: Handling Unknown
      • Traffic and Zero-Day Exploits
      • WildFire
      • Researching Threat Events
      • Identifying Unknown
      • Applications
    • Mod 7: Investigating
      • Breaches
      • Identify IOCs Using
      • App-Scope
      • Log Correlation
      • Finding Infected Host
    • Mod 8: Using Custom
      • Signatures
      • Creating Custom App-IDs
      • Threat Signatures

    A

    Prerequisites:

    • Students must complete the PA-213: Install, Configure, and Manage course
    • Understanding of network concepts, including routing, switching, and IP addressing
    • In-depth knowledge of port-based security and security technologies such as IPS, proxy, and content filtering

    This course is in no way associated with Palo Alto Networks, Inc.

    Comments

    Latest comments from students

    Like the class?  Then let everyone know!

    TN-909: Windows Forensic Analysis

     

    Course Overview:

    Windows Forensic Analysis is a hands-on course that covers digital forensics of the Microsoft Windows operating system.  The collection and analysis of data tracking user based activity that can be used for internal purposes or legal litigation.  TechNow has the student analyze many data images for various Windows operating systems, as current as Windows 8.1, Windows 10  in an environment that uses many Cloud technologies such as  Office365, Skydrive, Sharepoint, Exchange Online, and Windows Phone.

    This is not death by power point. The course is aligned with digital forensic investigators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Windows Forensic Analysis.

    Attendees to TN-909: Windows Forensic Analysis will receive TechNow approved course materials and expert instruction.

    Date/Locations:

    No Events

    Duration: 5 days

    Course Objectives:

    • Windows Operating System Components
    • Core Forensic Principles
    • Live Response and Triage-Based Acquisition Techniques
    • Windows Image Mounting and Examination
    • Memory, Pagefile, Filesystems
    • Data and Metadata
    • Profiling systems and users
    • Tracking USB and BYOD
    • Log and Registry Analysis
    • User Communications
    • Email Forensics
    • Browser Forensics
    • Reporting and  Presentation

    Course Prerequisites:

    • Windows and Security Experience

    Comments

    Latest comments from students

     

    Liked the class?  Then let everyone know!