PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

P-245: Programming with PERL

 

Course Overview:

This course teaches students how to use the powerful PERL programming language, focusing on hands-on labs to promote retention & challenge students to apply their skills to new situations. PERL is a flexible, easy to use language suitable for many tasks such as system administration, web applications & database integration. System administrators, web programmers & database administrators will benefit from mastering this powerful programming language. This course reviews & builds on the information presented in PL-115: Fundamentals of Computer Programming.

Attendees to P-245: Programming with PERL will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Introduction
  • Scalar Data
  • Lists & Arrays
  • Subroutines
  • Input & Output
  • Hashes
  • In the World of Regular Expressions
  • Matching with Regular Expressions
  • Processing Text with Regular Expressions
  • More Control Structures
  • File Tests
  • Directory Operations
  • Strings & Sorting
  • Process Management
  • PERL Modules
  • Some Advanced PERL Techniques

Prerequisites:

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

N-455: Securing Networks with ASA Fundamentals (SNAF)

Course Overview:

In this course, you will gain the knowledge and skills needed to configure, maintain, and operate Cisco ASA 5500 Series Adaptive Security Appliance.

Attendees to N-455: Securing Networks with ASA Fundamentals (SNAF) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Introducing Cisco Security Appliance Technology and Features
  • Cisco Adaptive Security Appliance and PIX Security Appliance Families
  • Getting Started with Cisco Security Appliances
  • Essential Security Appliance Configuration
  • Configuring Translations and Connection Limits
  • Using ACLS and Content Filtering
  • Configuring Object Grouping
  • Switching and Routing on Security Appliances
  • Configuring AAA for Cut-Through Proxy
  • Configuring the Cisco Modular Policy Framework
  • Configuring Advanced Protocol Handling
  • Configuring Threat Detection
  • Configuring Site-to-Site VPNS Using PreShared Keys
  • Configuring Security Appliance Remote Access VPNs
  • Configuring Cisco Security Appliance for SSL VPN
  • Configuring Transparent Firewalls Mode
  • Configuring Security Contexts
  • Configuring Failover
  • Managing Security Appliances

Prerequisites:

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-415: Computer Hacking Forensics Investigator (CHFI)

 

 

 

 

 

 

 

Course Overview:

The Computer Hacking Forensic Investigator (CHFI) course delivers the security discipline of digital forensics from a vendor-neutral perspective. CHFI is a comprehensive course covering major forensic investigation scenarios and enabling students to acquire necessary hands-on experience with various forensic investigation techniques and standard forensic tools necessary to successfully carry out a computer forensic investigation leading to the prosecution of perpetrators.

The CHFI certification gives participants the necessary skills to perform an effective digital forensics investigation. CHRI presents a methodological approach to computer forensics including searching and seizing, chain-of-custody, acquisition, preservation, analysis and reporting of digital evidence

What’s Included:

  • 5 days of instructor-led in classroom training
  • Detailed Labs for hands-on learning experience; approximately 50% of training is dedicated to labs
  • Hundreds of investigation tools including EnCase, Access Data FTL, & ProDiscover
  • Huge cache of evidence files for analysis including RAW, .dd images, video & audio files, MS Office files, systems files, etc.
  • CHFI Courseware
  • Exam Voucher
  • CHFI onsite exam scheduling

Course Objectives:

  • Establish threat intelligence and key learning points to support pro-active profiling and scenario modeling
  • Perform anti-forensic methods detection
  • Perform post-intrusion analysis of electronic and digital media to determine the who, where, what, when, and how the intrusion occurred
  • Extract and analyze of logs from various devices like proxy, firewall, IPS, IDS, Desktop, laptop, servers, SIM tool, router firewall, switches AD server, DHCP logs, Access Control Logs & conclude as part of investigation process
  • Identify & check the possible source/ incident origin
  • Recover deleted files and partitions in Windows, MAC OS X, and Linux
  • Conduct reverse engineering for known and suspected malware files
  • Collect data using forensic technology methods in accordance with evidence handling procedures, including collection of hard copy and electronic documents

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

    • Module 01. Computer Forensics in Today’s World
    • Module 02. Computer Forensics Investigation Process
    • Module 03. Understanding Hard Disks and File Systems
    • Module 04. Data Acquisition and Duplication
    • Module 05. Defeating Anti-forensics Techniques
    • Module 06. Operating System Forensics (Windows, Mac, Linux)
    • Module 07. Network Forensics
    • Module 08. Investigating Web Attacks
    • Module 09. Database Forensics
    • Module 10. Cloud Forensics
    • Module 10. Malware Forensics
    • Module 11. Investigating Email Crimes
    • Module 12. Investigating Email Crimes
    • Module 13. Mobile Forensics
    • Module 14. Forensics Report Writing and Presentation

 

Prerequisites:

      • 2+ years of proven information security work experience
      • Educational background with digital security specialization

    Target Audience:

      • Law Enforcement
      • Defense & Military
      • E-Business Security
      • Systems Administrators
      • Legal Professionals
      • Banking & Insurance professionals
      • Government Agencies
      • IT Managers

  • Comments

    Latest comments from students

    Liked the class?  Then let everyone know!

TN-555: Certified Ethical Hacker v12 (CEH)

Course Overview:

This CEH course will immerse you into a “Hacker Mindset” in order to teach you how to think like a hacker and better defend against future attacks. Students are in the driver’s seat with a hands-on training environment employing a systematic ethical hacking process. All while teaching students how to scan, test, hack, and secure target systems. CEH shows how hackers think and act maliciously so you can learn to better position your organization’s security infrastructure and defend against future attacks.

This CEH course covers the Five Phases of Ethical Hacking, diving into Reconnaissance, Gaining Access, Enumeration, Maintaining Access, and covering your tracks.

This CEH course delivers in-demand ethical hacking skills while preparing you for the internationally-recognized Certified Ethical Hacker (CEH) certification exam (312-50) from EC-Council.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

What’s Included:

  • EC-Council official E-Courseware
  • EC-Council official iLabs code with access for 6 months
  • EC-Council official Certificate of Attendance
  • CEH Exam Voucher

 

Security Course Flow
Document Flow Chart iconsm

Dates/Locations:

Date/Time Event
12/02/2024 - 12/06/2024
08:00 -16:00 		TN-555: Certified Ethical Hacker v12 (CEH)
TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Content:

  • Module 01. Introduction to Ethical Hacking
  • Module 02. Foot-printing and Reconnaissance
  • Module 03. Scanning Networks
  • Module 04. Enumeration
  • Module 05. Vulnerable Analysis
  • Module 06. System Hacking
  • Module 07. Malware Threats
  • Module 08. Sniffing
  • Module 09. Social Engineering
  • Module 10. Denial-of-Service
  • Module 11. Session Hijacking
  • Module 12. Evading IDS,Firewalls, and Honeypots
  • Module 13. Hacking Web Servers
  • Module 14. Hacking Web Applications
  • Module 15. SQL Injection
  • Module 16. Hacking Wireless Networks
  • Module 17. Hacking Mobile Platforms
  • Module 18. IoT and OT Hacking
  • Module 19. Cloud Computing
  • Module 20. Cryptography

 

Prerequisites:

  • Windows operating system and/or Linux operating system or other Unix-based OS
  • TCP/IP protocols and implementation
  • At least 2 years of IT security experience
  • TN-325:Security+

Target Audience:

Information Security Analyst/Administrator, Information Assurance (IA) Security Officer, Information Security Manager/Specialist, Auditors, Security Professional, Site Admins, Penetration Testers, Red Team,Risk/Threat/Vulnerability Analyst, Individuals concerned about the integrity of network infrastructure

 

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students

Liked the class?  Then let everyone know!