Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations:

No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students


Like the class?  Then let everyone know!

Course Overview:

This course is developed for those individuals seeking to pass the Project Management Institute’s PMP certification exam, as well as any individual who has attended any Project Management Certification program in the past and needs to brush up on the material needed to pass the PMP exam.

Attendees to PM-325: Project Management Professional (PMP) Exam Preparation will receive official PMI (Project Management Institute) course materials and expert instruction from an official PMI Instructor.

TechNow Inc. is an official Authorized Training Partner of The Project Management Institute (PMI).

 

Dates/Locations:

Date/Time Event
12/15/2025 - 12/19/2025
08:00 -16:00
PM-325: Project Management Professional (PMP) Exam Preparation
TechNow – San Antonio, TX, San Antonio Texas
03/16/2026 - 03/20/2026
08:00 -16:00
PM-325: Project Management Professional (PMP) Exam Preparation
TechNow, Inc, San Antonio TX
06/22/2026 - 06/26/2026
08:00 -16:00
PM-325: Project Management Professional (PMP) Exam Preparation
TechNow, Inc, San Antonio TX
09/28/2026 - 10/02/2026
08:00 -16:00
PM-325: Project Management Professional (PMP) Exam Preparation
TechNow, Inc, San Antonio TX
12/07/2026 - 12/11/2026
08:00 -16:00
PM-325: Project Management Professional (PMP) Exam Preparation
TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

  • Project Initiation
  • Examining the Project Management Framework
  • Examining the Project Management Processes
  • Implementing Project Integration Management
  • Managing the Project Scope
  • Introducing Project Time Management
  • Introducing Project Cost Management
  • Introducing Project Quality Management
  • Introducing Project Human Resource Management
  • Introducing Project Communications Management
  • Introducing Project Risk Management
  • Introducing Project Procurement Management
  • PMP Code of Professional Conduct

Prerequisites:

A Bachelor’s degree & 4,500 hours of project management experience over 3 years/36 months.

OR

7,500 hours of project management experience over 5 years/60 months (if NO degree).

AND

Complete & submit the PMP certification application directly to PMI

Comments

Latest comments from students


Liked the class?  Then let everyone know!

 

Course Overview:

CT-395: CompTIA CySA+ Cybersecurity Analyst is for IT professionals looking to gain IT security analyst skills, and for those following the recommended skills pathway to achieve cybersecurity mastery. It provides a bridge between CompTIA Security+ (CT-325) and CompTIA SecurityX (CT-425), thus completing a certification path within the CompTIA family of certifications. As attackers have learned to evade traditional signature-based solutions, an analytics-based approach has become extremely important. CySA+ applies behavioral analytics to the IT security market to improve the overall state of security. The CompTIA Cybersecurity Analyst (CySA+) certification verifies that successful candidates have the knowledge and skills required to configure and use threat detection tools, perform data analysis and interpret the results to identify vulnerabilities, threats and risks to an organization, with the end goal of securing and protecting applications and systems within an organization. Let us help you bridge this gap, and leave you prepared for the certification exam (CS0-003).

TechNow is a CompTIA partner uses official CompTIA CySA+ curriculum.

Dates/Locations:

Date/Time Event
12/01/2025 - 12/05/2025
08:00 -16:00
CT-395: CySA+ Cybersecurity Analyst
TechNow, Inc, San Antonio TX
03/02/2026 - 03/06/2026
08:00 -16:00
CT-395: CySA+ Cybersecurity Analyst
TechNow, Inc, San Antonio TX
06/01/2026 - 06/05/2026
08:00 -16:00
CT-395: CySA+ Cybersecurity Analyst
TechNow, Inc, San Antonio TX
08/24/2026 - 08/28/2026
08:00 -16:00
CT-395: CySA+ Cybersecurity Analyst
TechNow, Inc, San Antonio TX
11/16/2026 - 11/20/2026
08:00 -16:15
CT-395: CySA+ Cybersecurity Analyst
TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

  • Threat Management
  • Vulnerability Management
  • Cyber Incident Response
  • Security Architecture and Tool Sets

Prerequisites: 

While there is no required prerequisite, the CompTIA CySA+ certification is intended to follow CT-325: Security+ or equivalent experience.  It is recommended for CompTIA CySA+ candidates to have the following:

  • 3-4 years of hands-on information security or related experience
  • Network+, Security+, or equivalent knowledge.

Comments

Latest comments from students


 

Liked the class?  Then let everyone know!

 

Course Overview:

CT-225: Network+ is a five-day course that teaches students the fundamentals of networking. Through hands-on training, students learn the vendor-independent networking skills & concepts that affect all aspects of networking, such as installing & configuring the TCP/IP client. The course also helps to prepare students for three popular certification examinations: CompTIA Network+, Microsoft Networking Essentials, and Novell Networking Technologies.

Attendees to CT-225: Network+ will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time Event
12/15/2025 - 12/19/2025
08:00 -16:00
CT-225: Network+
TechNow, Inc, San Antonio TX
02/02/2026 - 02/06/2026
08:00 -16:00
CT-225: Network+
TechNow, Inc, San Antonio TX
05/04/2026 - 05/08/2026
08:00 -16:00
CT-225: Network+
TechNow, Inc, San Antonio TX
08/03/2026 - 08/07/2026
08:00 -16:00
CT-225: Network+
TechNow, Inc, San Antonio TX
11/02/2026 - 11/06/2026
08:00 -16:00
CT-225: Network+
TechNow, Inc, San Antonio TX

Duration 5 days

Course Objectives:

  • Identify basic network theory concepts and major network communications methods
  • Describe bounded network media
  • Describe unbounded network media
  • Identify the major types of network implementations
  • Identify TCP/IP addressing and data delivery methods
  • Analyze routing and switching technologies
  • Identify the components of a TCP/IP implementation
  • Analyze network security
  • Implement network security
  • Identify the components of a WAN implementation
  • Identify the components used in cloud computing and virtualization
  • Identify the components of a remote network implementation
  • Manage networks
  • Troubleshoot network issues

Prerequisites:

Comments

Latest comments from students


User: hanbri9

Instructor comments: Great instructor.

Facilities comments: BEST HOTEL!!!!!!! AMAZING LOCATION, GOOD FOOD, NICE SPACE. The location of the hotel is what is almost the best about it. Driving up hwy 10 in the morning is absolutely awful.



 

Like the class?  Then let everyone know!

 

Course Overview:

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies is the big picture overview of a SOC, other courses provide a deep dive into the technologies that a SOC may utilize. This course addresses the internal workings of staff, skills required, required authorizations, internal agreements, and setting appropriate expectation levels of a SOC within budget constraints. A SOC is not a one size fits all, the instructor has decades of security experience and brings to the table opportunities to discuss what can work within constraints. Many organizations are coming to the realization that some level of a SOC is now required and to learn just what decisions need to be made: Out-sourced, In-sourced, budgets, capabilities and many more. Students leave with a worksheet of how to progress when they get back to their organization.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies – Is a course that incorporates lecture, demos, and group exercises for standing up a Security Operations Center (SOC). Students learn strategies and resources required to deploy, build, and run Network Security Monitoring (NSM) and work roles and flows for a SOC. No network is bullet proof and when attackers access your network, this course will show you options and resources to build a security net to detect, contain, and control the attacker. Examples on what it takes to architect an NSM solution to identify sophisticated attackers and a response strategy. Properly implemented detection and response technologies is integral to incident response and provides the responders timely information and tools to react to the incident. Effective demonstrations are given of Open Source technologies that build up a SOC, but any software can be used and demonstrations are provided to demonstrate technology families not push a specific solution.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies demonstrations utilize a cyber range that gives each student in-depth knowledge of monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls; and software and services to provide orchestrate Incident Response, Intelligence Analysis, and Hunt Operations.

Attendees to TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies class will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 2 Days

Course Objective:

    • To provide management an overview of what it takes to stand up a SOC.

Prerequisites:

  • Students should have an understanding of the security field.

Course Outline:

  • What threats does my organization care about?
  • What does a threat look like?
  • What does a threat look like?
  • How to present the SOC internally.
  • Communication with Stakeholders and Executives
  • Leveraging and integrating existing security measures
  • People
    • Establishing a skill matrix and work roles for SOC members
    • Establishing a training path
    • Personnel background requirementsProcesses
  • Processes
    • Alignment to standards: NIST, PCI, HIPAA, etc.
    • Risk related decision trees
    • Playbooks
    • Threat Intelligence Integration
  • Technology – Tool Suites to Support:
    • Ethical Hacking
    • Network Security Monitoring and SIEM
    • Forensics
    • Dashboards
    • Analysis and Hunting
    • Incident Management and Ticketing

 

Comments

Latest comments from students


 

Liked the class?  Then let everyone know!