TN-575: Open Source Network Security Monitoring

Course Overview:

TN-575: Open Source Network Security Monitoring teaches students how to deploy, build, and run an NSM operation using open source software and vendor-neutral tools. No network is bullet proof and when attackers access your network, this course will show you how to build a security net to detect, contain, and control the attacker. Sensitive data can be monitored and deep packet and deep attachment analysis can be achieved. As organizations stand up a Security Operations Center (SOC) the enterprise NSM is the key ingredient to that SOC. This course not only teaches how to implement an NSM technologically, but how to effectively monitor an enterprise operationally. You will learn how to architect an NSM solution: where to deploy your NSM platforms and how to size them, stand-alone or distributed, and integration into packet analysis, interpret evidence, and integrate threat intelligence from external sources to identify sophisticated attackers. A properly implemented NSM is integral to incident response and provides the responders timely information to react to the incident. TN-575: Open Source Network Security Monitoring is a lab intensive environment with a cyber range that gives each student in-depth knowledge and practical experience monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls.

Attendees to TN-575: Open Source Network Security Monitoring class will receive TechNow approved course materials and expert instruction.

This Course is taught utilizing Security Onion or RockNSM as specified by the customer.

Dates/Locations:

No Events

Duration: 5 Days

Course Objective:

The focus of this course is to present a suite of Open Source security products integrated into a highly functional and scalable Network Security Monitoring solution.

Prerequisites:

Students should have a basic understanding of networks, TCP/IP and standard protocols such as DNS, HTTP, etc. Some Linux knowledge/experience is recommended, but not required

Course Outline:

Network Security Monitoring (NSM) Methodology
High Bandwidth Packet Capture Challenges
Installation of Security Onion
- Use Cases (analysis, lab, stand-alone, distributed)
- Resource Requirements
Configuration
- Setup Phase I – Network Configuration
- Setup Phase 2 – Service Configuration
- Evaluation Mode vs. Configuration Mode
- Verifying Services
Security Onion Architecture
- Configuration Files and Folders
- Network Interfaces
- Docker Environment
- Security Onion Containers
Overview of Security Onion Analyst Tools
- Kibana
- CapME
- CyberChef
- Squert
- Sguil
- NetworkMiner
Quick Review of Wireshark and Packet Analysis
- Display and Capture Filters
- Analyze and Statistics Menu Options
- Analysis for Signatures
Analyzing Alerts
- Replaying Traffic
- 3 Primary Interfaces:
  - Squert
  - Sguil
  - Kibana
- Pivoting Between Interfaces
- Pivoting to Full Packet Capture
Snort and Surricata
- Rule Syntax and Construction
- Implementing Custom Rules
- Implementing Whitelists and Blacklists
Hunting
- Using Kibana to Slice and Dice Logs
- Hunting Workflow with Kibana
Bro
- Introduction and Overview
  - Architecture, Commands
- Understanding and Examining Bro Logs
  - Using AWK, sort, uniq, and bro-cut
- Working with traces/PCAPs
- Bro Scripts Overview
  - Loading and Using Scripts
- Bro Frameworks Overview
  - Bro File Analysis Framework FAF
- Using Bro scripts to carve out more than files
RockNSM ( * If Applicable)
- Kafka
  - Installation and Configuration
  - Kafka Messaging
  - Brokers
  - Integration with Bro and FSF
- File Scanning Framework FSF
  - Custom YARA Signatures
  - JSON Trees
  - Sub-Object Recursion
  - Bro and Suricata Integration
Elastic Stack
- Adding new data sources in Logstash
- Enriching data with Logstash
- Automating with Elastalert
- Building new Kibana dashboards
Production Deployment
- Advanced Setup
- Master vs Sensor
- Node Types – Master, Forward, Heavy, Storage
- Command Line Setup with sosetup.conf
- Architectural Recommendations
- Sensor Placement
- Hardening
- Administration
- Maintenance
Tuning
- Using PulledPork to Disable Rules
- BPF’s to Filter Traffic
- Spinning up Additional Snort / Suricata / Bro Workers to Handle Higher Traffic Loads

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-929: Security Essentials Training Course

Course Overview:

What a great course that is slightly misnamed! This course may be labeled Security Essentials, but covers much of the subject matter of CISSP! This course does more than just cover the basics. TechNow takes the time to give the student hands on labs to exemplify an objective. Security Essentials Prep Training Course sets the foundation for your security career and sets the expectation of comprehension with more detail than Security+ and more on par with CISSP.

This course provides students skills to take courses that prepare for higher level certifications.

Attendees to TN-929: Security Essentials Training Course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 9 days

Course Objectives:

802.11 Suite of Protocols
Access Control Theory
Alternate Network Mapping Techniques
Authentication and Password Management
Contingency Planning
Crypto Concepts
Crypto Fundamentals
Defense-in-Depth
DNS
Firewall Subversion
Firewalls
HIDS Overview
Honeypots
ICMP
IDS Overview
Incident Handling Fundamentals
Information Warfare
Introduction to OPSEC
IP Packets
IPS Overview
IPv6
Legal Aspects of Incident Handling
Linux/Unix Configuration Fundamentals
Linux/Unix Logging and Log Management
Linux/Unix OS Security Tools and Utilities
Linux/Unix Overview
Linux/Unix Patch Management
Linux/Unix Process and Service Management
Mitnick-Shimomura
Network Addressing
Network Design
Network Hardware
Network Mapping and Scanning
Network Plumbing
Network Protocol
NIDS
OverviewPhysical Security
Policy Framework
Protecting Data at Rest
Public Key Infrastructure
PKI
Reading Packets
Risk Management
Safety Threats
Securing Windows Server Services
Steganography
OverviewTCPUDP
Virtual Machines
Virtual Private Networks VPNs
Viruses and Malicious Code
VoIP
Vulnerability Management Overview
Vulnerability Scanning
Web Application Security
Windows Auditing
Windows Automation and Configuration
Windows Family of Products
Windows Network Security Overview
Windows Permissions & User Rights
Windows Security Templates & Group Policy
Windows Service Packs, Hotfixes and Backups
Windows Workgroups, Active Directory and Group Policy Overview
Wireless Overview

Prerequisites:

Passed CompTIA Security+

Comments

Latest comments from students

User: sjsmith2262

Instructor comments: without question, Dave Askey knows his material!!! great instructor that gave a personalized approach.

Facilities comments: class was taught in a hotel reception area, very nice, quiet and convenient for all people

User: synistry

Instructor comments: Dave was great! (as always). Wealth of knowledge and a master at customizing course content to match the education level of his students. The class kept entirely in pace with where we were at as a group overall on a day to day basis.

Facilities comments: Facilities were overall really nice. The only complaint is that the hotel / conference center had us move rooms on one occasion, and kicked us out early on two others. I would assume this is due to the last minute location change, so I don't think there is anything anyone could have done better in the situation.

Liked the class? Then let everyone know!

N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)

Course Overview:

The Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) course gives you the knowledge and skills needed to configure, troubleshoot, and manage enterprise wired and wireless networks. You’ll also learn to implement security principles, implement automation and programmability within an enterprise network, and how to overlay network design by using SD-Access and SD-WAN solutions.

Attendees to N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) will receive TechNow approved course materials, expert instruction, and prepare you to take the 350-401 Implementing Cisco® Enterprise Network Core Technologies (ENCOR) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers
Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts
Troubleshoot Layer 2 connectivity using VLANs and trunking
Implementation of redundant switched networks using Spanning Tree Protocol
Troubleshooting link aggregation using Etherchannel
Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)
Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6
Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
Describe the virtualization technology of servers, switches, and the various network devices and components
Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)
Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture
Describe wireless roaming and location services
Describe how APs communicate with WLCs to obtain software, configurations, and centralized management
Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-Shared Key (PSK) wireless client authentication on a WLC
Troubleshoot wireless client connectivity issues using various available tools
Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager
Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting
Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP
Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits
Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features
Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience
Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
Explain basic Python components and conditionals with script writing and analysis
Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
Describe APIs in Cisco DNA Center and vManage

Prerequisites:

CCNA certification
Implementation of Enterprise LAN networks
Basic understanding of Enterprise routing and wireless connectivity
Basic understanding of Python scripting

Comments

Latest comments from students

User: don.seguin

Instructor comments: Tim was a great.

Facilities comments: The classroom was great.

User: jrtrussell

Instructor comments: Awesome

Facilities comments: Great

Liked the class? Then let everyone know!

TN-825: Certified Information Security Manager (CISM) Seminar

Course Overview:

The Certified Information Security Manager (CISM) certification program is developed specifically for experienced information security managers & those who have information security management responsibilities. The CISM certification is for the individual who manages, designs, oversees and/or assesses an enterprise’s information security (IS). The CISM certification promotes international practices & provides executive management with assurance that those earning the designation have the required experience & knowledge to provide effective security management & consulting services. Individuals earning the CISM certification become part of an elite peer network, attaining a one-of-a-kind credential. The CISM job practice also defines a global job description for the information security manager & a method to measure existing staff or compare prospective new hires.

This course is designed to assist in your exam preparation for the CISM exam.

Attendees to TN-825: Certified Information Security Manager (CISM) Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Information Security Governance (24%)
Establish and/or maintain an information security governance framework and supporting processes to ensure that the information security strategy is aligned with organizational goals and objectives
Information Risk Management (30%)
Manage information risk to an acceptable level based on risk appetite to meet organizational goals and objectives
Information Security Program Development and Management (27%)
Develop and maintain an information security program that identifies, manages and protects the organization’s assets while aligning to information security strategy and business goals, thereby supporting an effective security posture
Information Security Incident Management (19%)
Plan, establish and manage the capability to detect, investigate, respond to and recover from information security incidents to minimize business impact

Prerequisites:

A minimum of five years of information security work experience, with a minimum of three years of information security management work experience in three or more of the job practice analysis areas.

Comments

Latest comments from students

User: tracycampbell

Instructor comments: Dave had great command of the class and the flow of information. The lessons seem relevant to the exam and the course material should assist greatly with passing. As a bonus, his breakdown of PKI helped with my current job requirements.

Facilities comments: The Home2Suites by Hilton was FANTASTIC!

Liked the class? Then let everyone know!

N-325: Implementing Cisco IOS Network Security (IINS)

Course Overview:

Implementing Cisco IOS Network Security (IINS) is an instructor-led course. This five-day course focuses on the necessity of a comprehensive security policy and how it affects the posture of the network. TechNow students each get a Cisco Switch, Router, and an ASA. The in the classrom hardware hands-on component of this course is a priority. Using instructor-led discussions, extensive hands-on lab exercises, and supplemental materials, this course allows learners to understand common security concepts, and deploy basic security techniques utilizing a variety of popular security appliances within a “real-life” network infrastructure. TechNow is an Authorized VUE testing partner and this course concludes with the student taking the 210-260 IINS Cisco Certification Exam.

Duration: 5 days

Audience: Cisco Network Administrators. This course is an excellent precursor to Palo Alto Network Firewall Training

DoD 8140: Not Mandated

Course Prerequisites: CCNA

Course Objectives:

Describe common network security concepts
Secure routing and switching infrastructure
Deploy basic authentication, authorization and accounting services
Deploy basic firewalling services
Deploy basic site-to-site and remote access VPN services
Describe the use of more advanced security services such as intrusion protection, content security and identity management

Attendees to N-325: Implementing Cisco IOS Network Security will receive TechNow approved course materials and expert instruction.