PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course

Course Overview:

This course is developed for those individuals seeking to pass the Project Management Institute’s PMI-ACP Exam. PMI Agile Certified Practitioner (PMI-ACP)® is one of the newest certifications offered by PMI and is expected to become the industry standard certification for agile over the next few years. The PMI-ACP® certification clearly illustrates to colleagues, organizations or even potential employers that students are ready and able to lead in this new age of product development, management, and delivery.

While preparing you for the exam, you will explore various approaches to agility including Scrum, Kanban, Lean, Extreme Programming (XP), and Test-Driven Development (TDD). By the end of the course, you’ll have mastered the practices and techniques that Agile practitioners use to improve team performance, resolve problems and engage in continuous process improvements and be equipped with job-ready skills.

This course provides students with 21 contact hours in agile practices to help attain the Project Management Institute (PMI)® credential. PMI® and PMI-ACP® are registered marks of the Project Management Institute, Inc.

Attendees to PM-224: PMI Agile Certified Practitioner (PMI-ACP) Prep Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time	Event
02/17/2026 - 02/20/2026 08:00 -16:00	PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course TechNow, Inc, San Antonio TX
05/26/2026 - 05/29/2026 08:00 -16:00	PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course TechNow, Inc, San Antonio TX
08/17/2026 - 08/20/2026 08:00 -16:00	PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course TechNow, Inc, San Antonio TX
12/14/2026 - 12/17/2026 08:00 -16:00	PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course TechNow, Inc, San Antonio TX

Duration: 4 Days

Course Objectives:

Agile Principles and Mindset
Value-driven delivery
Stakeholder engagement
Team performance
Adaptive planning
Problem detection and Resolution
Continuous Improvement

Prerequisites:

Secondary degree
21 contact hours of training in agile practices
12 months of general project experience within the last 5 years. A current PMP^® or PgMP^® will satisfy this requirement but is not required to apply for the PMI-ACP
8 months of agile project experience within the last 3 years

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-223: Advanced Shell Programming

Course Overview:

The course teaches students to use the sort, grep, sed, & awk utilities within Unix. Systems administrators, Unix users, & programmers benefit from the course showing them how to use the command line applications of sort, grep, sed, & awk commands as well as using sed & awk scripts that develop the users skills with the full power of these utilities.

Attendees to TN-223: Advanced Shell Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 3 Days

Course Objectives:

Sorting files by line or field
Regular Expressions (meta character) with grep commands to locate specific lines in files
Performing non-interactive editing tasks with the sed command
Writing simple sed scripts to perform complex editing tasks
Using awk variables & arrays to sort data
Employing awk programs to manipulate numeric & textual data
Performing formatted printing in awk
Writing simple awk programs to write reports from data files
Using built-in awk functions & defining new functions
Write awk programs that make decisions based on numeric or string comparisons (branches & loops)
Grep, egrep extended metacharacters, combinations-lab advanced combinations- lab Sed
Basic commands- Lab, Advanced commands- Lab, Advanced scripting -Lab
Miscellaneous commands Tr, sort, cut, paste, pr -Lab

Prerequisites:

TN-125: Introduction to UNIX & Linux
TN 215: Shell Programming.
Students should have a basic knowledge of UNIX commands including rm, cp, man, cat, & mkdir. Navigating directory structure using commands such as ls, cp, & pwd. Creating and editing files with the vi editor or text editor. Use of basic programming constructs, & commands such as variables & loops & how to write a simple program in a programming language.

Comments

Latest comments from students

Liked the class? Then let everyone know!

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations:

No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

Cisco Security Courses

Here are the Cisco Security course offerings:

Test2

http://technow.www162-254-253-232.a2hosted.com/palo-alto-firewall-essentials-fasttrack-training-class-course-pa-215/

Course Overview:

PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-222: Palo Alto Networks Panorama Essentials.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications.

Attendees to the PA-215: Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:

Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1 Module 0 – Introduction & Overview Module 1 – Administration & Management Configuration Management PAN-OS & Software Updates Service Route Configuration Log Forwarding GUI, CLI, and API Module 2 – Interface Configuration L2 & L3 Vwire Tap Interface Management in Security Zones VLANs QoS	Day 2 Module 3 – Layer 3 Configuration L3 Configuration and DHCP NAT DNS Proxy Policy Based Forwarding in Introduction to IPv6 Module 4 – App-ID App-ID Process Policy Administration Module 5 – Content-ID Antivirus Anti-spyware Vulnerability URL Filtering File Blocking and Wildfire Data Filtering DoS Protection Botnet
Day 3 Module 6 – VM Firewall Downlaod VM Template Configure ESXi Configure VM Module 7 – Decryption SSL Inbound and Outbound Module 8 – Custom Signatures Defining New Application Signatures Application Override Custom Threat ID	Day 4 Module 9 – User-ID User-ID Agent Terminal Server Agent XML API Captive Portal Module 10 – VPN and GlobalProtect Psec Tunnels GlobalProtect Agent Portal Gateway HIP
Day 5 Module 11 – High Availability Active/Passive Active/Active Module 12 – Panorama Device Groups & Objects Shared Policy Configuration Management Reporting

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students