Test2

http://technow.www162-254-253-232.a2hosted.com/palo-alto-firewall-essentials-fasttrack-training-class-course-pa-215/

Course Overview:

PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-222: Palo Alto Networks Panorama Essentials.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications.

Attendees to the PA-215: Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:

Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1 Module 0 – Introduction & Overview Module 1 – Administration & Management Configuration Management PAN-OS & Software Updates Service Route Configuration Log Forwarding GUI, CLI, and API Module 2 – Interface Configuration L2 & L3 Vwire Tap Interface Management in Security Zones VLANs QoS	Day 2 Module 3 – Layer 3 Configuration L3 Configuration and DHCP NAT DNS Proxy Policy Based Forwarding in Introduction to IPv6 Module 4 – App-ID App-ID Process Policy Administration Module 5 – Content-ID Antivirus Anti-spyware Vulnerability URL Filtering File Blocking and Wildfire Data Filtering DoS Protection Botnet
Day 3 Module 6 – VM Firewall Downlaod VM Template Configure ESXi Configure VM Module 7 – Decryption SSL Inbound and Outbound Module 8 – Custom Signatures Defining New Application Signatures Application Override Custom Threat ID	Day 4 Module 9 – User-ID User-ID Agent Terminal Server Agent XML API Captive Portal Module 10 – VPN and GlobalProtect Psec Tunnels GlobalProtect Agent Portal Gateway HIP
Day 5 Module 11 – High Availability Active/Passive Active/Active Module 12 – Panorama Device Groups & Objects Shared Policy Configuration Management Reporting

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

CL-355: Containers, Kubernetes, and Red Hat OpenShift Administration

Course Overview:

Through an introduction to Docker, Kubernetes, and Red Hat OpenShift Platform, this training course helps you understand one of the key tenets of the DevOps and DevSecOps Platform (DSOP) movement: continuous integration and continuous deployment. The CI/CD pipeline becomes well understood and implemented in an open architecture. Containers have become a key technology for the configuration and deployment of applications and micro services. Kubernetes is a container orchestration platform that provides foundational services in Red Hat OpenShift Container Platform, which allows enterprises to manage container deployments and scale their applications using Kubernetes.

This training course provides an overview of the DoD Enterprise DevSecOps Platform (DSOP) Reference Design, its current state, and ties to DoD Cloud Platform One (P1). Workflows of the DoD Iron Bank container repository are introduced, along with an overview of the DoD Pipeline as represented in Big Bang. Continuous authorization cATO via Party Bus within NIST RMF is presented. You will become aware of the Platform One (P1) integrations and relationship to Docker, Kubernetes, Istio (Red Hat OpenShift Service Mesh) and Red Hat OpenShift Platform.

In addition to gaining an understanding of these tools, you will build core administration skills through the installation, configuration, and management of an OpenShift cluster and containerized applications.

Course Objectives:

Learn about Containers, Docker, Kubernetes, and OpenShift architecture
Overview DoD Enterprise DevSecOps Platform (DSOP) Reference Design and DoD Cloud Platform One (P1)
Tie together awareness of various DoD Cloud offerings and their relationships
Create containerized services
Manage containers and container images
Deploy multi-container applications
Install an OpenShift cluster
Configure and manage masters and nodes
Secure OpenShift
Control access to resources on OpenShift
Monitor and collect metrics on OpenShift
Deploy applications on OpenShift using source-to-image (S2I)
Manage storage on OpenShift

Course Outline:

Getting started with container technology
Creating containerized services
Managing containers
Managing container images
Creating custom container images
Deploying containerized applications on OpenShift
Deploying multi-container applications
Troubleshooting containerized applications
Comprehensive Review of Introduction to Container, Kubernetes, and RedHat OpenShift
Introducing Red Hat OpenShift Container Platform
Installing OpenShift Container Platform
Describing and exploring OpenShift networking concepts
Executing commands
Controlling access to OpenShift resources
Allocating persistent storage
Managing application deployments
Installing and configuring the metrics subsystem
Managing and monitoring OpenShift Container Platform

Dates/Locations:

No Events

Duration: 5 Days

Prerequisites:

Ability to use a Linux® terminal session and issue operating system commands
Good foundation in Linux
Experience with web application architectures and their corresponding technologies

Target Audience:

Developers who wish to containerize software applications
Administrators who are new to container technology and container orchestration
Architects who are considering using container technologies in software architectures
System administrators
System architects
Architects and developers who want to install and configure OpenShift Container Platform
Those working in the field of DevSecOps supporting DoD Platform One (P1) and other implementations

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW

Course Overview:

An in-depth course on how to use and configure Cisco Firepower Threat Defense technology, from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT). Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting. This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.

It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.

Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
Configure the Firepower Management Center (FMC)
Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
Describe the Cisco Firepower Systems infrastructure
Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
Describe the System Configuration and Health policies and implement them
Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
Describe, create, and implement objects for use in Access Control policies
Create DNS and URL policies and configure Sinkholes
Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
Describe advanced policy configuration and Firepower system configuration options
Configure Malware Policies to find and stop Malware
Understand Security Intelligence, and how to configure SI to stop attacks NOW!
Configure policies to find and stop Ransomware
Understand how to fine tune IPS policies
Understand how to find tun Snort Preprocessor policies (NAP)
Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
Analyze events
Create reporting templates and schedule them
Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
Set up external authentication for users using LDAP/Realms
Configuring system integration, realms, and identity sources
Configure FMC domains and implement them
Configure FTD HA with two FTD devices
SSL Policy – decrypt your traffic
AnyConnect and Site-to-Site VPN
Understand network and host based AMP. Configure and analyze host based AMP
Understand Cisco Identity Services Engine (ISE)
Configure ISE and integrate with Cisco FMC identity policy using PxGrid

Prerequisites:

Cisco Certified Network Associate (CCNA) certification. or equivalent
Cisco Certified Network Associate Security (CCNA Security) certification. or equivalent
Working knowledge of the Microsoft Windows operating system.

Comments

Latest comments from students

Liked the class? Then let everyone know!

DoD 8570

DoD 8570 Training

The Department of Defense requires that all information assurance personnel must become compliant with IT and security certification standards.

DoD 8570 training, also called Information Assurance training, is available through TechNow to provide you with the certification that is required. Your DoD 8570 training ( information assurance training ) at TechNow will provide you with all of the courses necessary to receive your DoD 8570.01-M certification.

Ongoing open enrollment through TechNow is available for our DoD 8570.01-M courses.

Please review the full & updated DoD approved IA baseline certifications aligned to each category & level of the IA workforce.

For further information or to schedule for classes, call us at 800-324-2294

CT-325: Security+

Course Overview:

The CT-325: Security+ (SY0-701) class is the primary class you will need to take if your job responsibilities include securing network services, network devices, and network traffic. It will also help you prepare for the CompTIA Security+ examination (exam number SY0-701). In the CT-325: Security+ class you’ll build on your knowledge and professional experience with computer hardware, operating systems, and networks as you acquire the specific skills required to implement basic security services on any type of computer network. Let us help you prepare for the CompTIA Security+ exam (SY0-701).

TechNow is a CompTIA partner and uses official CompTIA Security+ curriculum.

Attendees to CT-325: Security+ will receive TechNow approved course materials and TechNow expert instruction.

Dates/Locations:

Date/Time	Event
08/18/2025 - 08/22/2025 08:00 -16:00	CT-325: Security+ TechNow, Inc, San Antonio TX
10/27/2025 - 10/31/2025 08:00 -20:00	CT-325: Security+ TechNow, Inc, San Antonio TX
12/15/2025 - 12/19/2025 08:00 -16:00	CT-325: Security+ TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

Compare and contrast attacks
Compare and contrast security controls
Use security assessment tools
Explain basic cryptography concepts
Implement a public key infrastructure
Implement identity and access management controls
Manage access services and accounts
Implement a secure network architecture
Install and configure security appliances
Install and configure wireless and physical access security
Deploy secure host, mobile, and embedded systems
Implement secure network access protocols
Implement secure network applications
Explain risk management and disaster recovery concepts
Describe secure application development concepts
Explain organizational security concepts

Prerequisites:

CompTIA A+ and Network+ certifications, or equivalent knowledge.
Windows 7/8/10 and Server 2008/2012/2016 experience required.
Six to nine months experience in networking, including experience in configuring & managing TCP/IP.

Comments

Latest comments from students

User: joshjepsen@hotmail.com

Instructor comments: Instructor was very knowledgeable on all the course content. There were some instances when I felt he streamlined through some of the material too quickly, such as going over how to identify types of attacks.