PA-215: Palo Alto Networks Firewall Essentials FastTrack

  

Course Overview: PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course combines PA-213 and PA-212 and adds a half day introduction to Panorama and Troubleshooting.  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-232: Palo Alto Networks Panorama Manage Multiple Firewalls. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications. Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  Additionally Panorama and Troubleshooting are addressed.

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

User: rod3535@gmail.com

Instructor comments: Instructor was great, he explained everything and made sure we understood the process's/product. He also took time out of his own schedule to help set up a VM environment on our personal pc's.

Facilities comments: Facility was great, enjoyed feeding the deers!

Like the class?  Then let everyone know!

TN-919: Penetration Tester Course

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

Attendees to TN-919:Penetration Tester course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Advanced Hash Manipulation
  • Command Shell vs. Terminal Access
  • Enumerating Users
  • Exploitation Fundamentals
  • Injection Attacks
  • Legal Issues
  • Metasploit
  • Moving Files with Exploits
  • Obtaining and Passing Password Representations
  • Overview of Passwords
  • Penetration Testing Foundations
  • Penetration Testing Process
  • Penetration Testing via the Command Line
  • Profiling the Target
  • Reconnaissance
  • Scanning for Targets
  • Using a Proxy to Attack a Web Application
  • Vulnerability Scanning
  • Wireless Crypto and Client Attacks
  • Wireless Fundamentals

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking, and security experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: kdwagoner

Instructor comments: Very knowledgeable. Kept class focused and on task

Facilities comments: Good

Liked the class?  Then let everyone know!

TN-939: Hacker Techniques, Exploits, and Incident Handling Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the exam.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations. The course concludes with exercising real attack strategies to demonstrate the techniques acquired throughout the course.

Attendees to TN-939:  Hacker Techniques, Exploits, and Incident Handling will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 9 days

Course Objectives:

  • Backdoors & Trojan Horses
  • Buffer Overflows
  • Covering Tracks: Networks
  • Covering Tracks: Systems
  • Denial of Service Attacks
  • Exploiting Systems Using Netcat
  • Format String Attacks
  • Incident Handling Overview and Preparation
  • Incident Handling Phase 2: Identification
  • Incident Handling Phase 3: Containment
  • Incident Handling: Recovering and Improving Capabilities
  • IP Address Spoofing
  • Network Sniffing
  • Password Attacks
  • Reconnaissance
  • Rootkits
  • Scanning: Host Discovery
  • Scanning: Network and Application Vulnerability scanning and tools
  • Scanning: Network Devices (Firewall rules determination, fragmentation, and IDS/IPS evasion)
  • Scanning: Service Discovery
  • Session Hijacking, Tools and Defenses
  • Types of Incidents
  • Virtual Machine Attacks
  • Web Application Attacks
  • Worms, Bots & Bot-Nets

Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: m_jurrens

Instructor comments: Both instructors Mr. Askey and Mr. Hackney, were very good. the open learning environment was extremely productive and I felt we all learned far more that we ever would out of a structured rote memorization course.

User: natebonds

Instructor comments: Both Mr. Askey and Hackney were extremely knowledgeable. They were also extremely interested in helping each student learn. I was particularly impressed with the way they tailored the course to optimize our time since we weren't testing. I feel like I know much much more than I did when the class started.

Facilities comments: The facilities were fine. I would have preferred it be closer to Lackland.

Liked the class?  Then let everyone know!

RH-295: Linux System Administration II

Course Overview:

Linux System Administration II course is for experienced administrators ready for advanced administration topics. This course provides students with hands-on experience working with more complex and integrated administration concepts, and builds upon the Part 1 course. Students will be instructed in essential  local Red Hat system administration skills including: Logical Volumes, Raid Management, and System Logging, SELinux and Virtual Machines.  The Linux System Administration II course will get you started in understanding network administration topics, including monitoring, routing, Firewall with iptables, and servers such as NFS, SAMBA, DNS, SMTP, HTTP, DHCP, and Kickstart.

Attendees to RH-295: Linux System Administration II will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time Event
03/09/2026 - 03/13/2026
08:00 -16:00 		RH-295: Linux System Administration II
TechNow, Inc, San Antonio TX
06/08/2026 - 06/12/2026
08:00 -16:00 		RH-295: Linux System Administration II
TechNow, Inc, San Antonio TX
09/21/2026 - 09/25/2026
08:00 -16:00 		RH-295: Linux System Administration II
TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

  • Managing Logical Volumes and RAID
  • Network Routing, Filtering and Monitoring
  • Configuring File Sharing Across Platforms
  • Configuring Internet Services
  • Configuring Security
  • Configuring System Messaging
  • Using Name Services
  • Configuring Name Service Clients
  • Configuring Kickstart
  • Virtualization with KVM
  • Troubleshooting Boot Process

Prerequisites:

Comments

Latest comments from students

Liked the class?  Then let everyone know!

C-215: Introduction to C Programming

 

Course Overview:

The C-215: Introduction to C Programming course is a hands-on course providing a complete introduction to the ANSI C programming language, focusing on quickly developing the practical skills needed to create real-world solutions.  Our hands-on labs are designed to promote retention and challenge students to apply their skills to new situations.

Attendees to C-215: Introduction to C Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • What is C?
  • Basics of Program Writing
  • Style
  • Basic Declarations & Expressions
  • Arrays, Qualifiers & Reading Numbers
  • Decision & Control Statements
  • Programming Process
  • More Controls Statements
  • Variable Scope & Functions
  • C Preprocessor
  • Bit Operations
  • Advanced Types
  • Simple Pointers
  • File Input/Output
  • Debugging & Optimization
  • Floating Point

Prerequisites:

Before attending this course, you should be able to use basic UNIX commands and have previous programming experience language, or have taken our Introduction to Computer Progamming class.

 

Comments

Latest comments from students

User: jangles1337

Instructor comments: Pretty knowledgeable on a number of things. Could have had a better in depth understanding of the material.

Facilities comments: Was a hotel so it was pretty noisy some times.

User: ldorsey

Instructor comments: Great guy full of knowledge

 

Liked the class?  Then let everyone know!