L-295: Linux System Administration II

Course Overview:

In this course students will learn to configure the Linux kernel, install & configure modules, to install and configure non-default devices and automate installation with Kickstart. Students also utilize skills developed in L-245 to expand on file system configuration with spanning devices and RAID. This is the foremost server side Linux course in the industry covering all server side components such as DHCP, Samba, NIS, LDAP, inet, telnet ftp, dns, etc.  Expanding on security introduced in L-245: Linux System Administration I, TCP wrappers, firewalling with IP filters, SQUID, & ssh are covered.

Attendees to L-295: Linux System Administration II will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Custom installation of a Linux server
  • Linux device naming conventions & the boot process
  • Adding peripheral devices
  • Reconfiguring the kernel
  • Disk partitioning & formatting
  • Changing system run levels
  • Adding startup files for additional services
  • Adding & removing software packages
  • Disk & file system Administration
  • Terminals & modem configuration
  • Configuring NFS to support the client/server environment
  • Use the automounter
  • Server side components such as DHCP, Samba, NIS, LDAP, inet, telnet, ftp, DNS, etc.
  • Troubleshooting techniques
  • Advanced Linux installation

Prerequisites:

Comments

Latest comments from students

Liked the class?  Then let everyone know!

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-715: Systems Security Certified Practitioner (SSCP)

Course Overview:

Looking to move up in the information security field? If you have at least one year of security experience, you qualify for the Systems Security Certified Practitioner (SSCP) certification, which offers junior security professionals a way to validate their experience and demonstrate competence with (ISC²)®’s seven domains.

Attendees to TN-715: Systems Security Certified Practitioner (SSCP) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Access Controls
  • Security Operations and Administration
  • Analysis and Monitoring
  • Cryptography
  • Networks and Telecommunications
  • Malicious Code/Malware
  • Risk, Response, and Recovery

Prerequisites:

  • One year security experience
  • Some knowledge of the (ISC²)®’s seven domains

Comments

Latest comments from students

User: boyleb15

Instructor comments: Instructor was very knowledgeable on most items covered during this course. There were some topics he did lack the answer to. Instructor would also get sidetracked easily

User: keginth

Instructor comments: he was phenomenal with test prep and knew the book well

Facilities comments: adequate

Like the class?  Then let everyone know!

C-225: C++ Object Oriented Programming

 

Course Overview:

C-225: C++ Object Oriented Programming is a hands-on course that provides a complete introduction to the ANSI Standard C++ programming language, focusing on quickly developing the practical skills needed to create real-world solutions.  Our hands-on labs are designed to promote retention and challenge students to apply their skills to new situations.

C++ is more than just C with classes.  It is a whole new language with a structure similar to C, but with significant differences to warrant a complete course to cover its features.

Attendees to C-225: C++ Oriented Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Classes
  • Casting in C++
  • Constructors & Destructors
  • Class Methods & Data
  • Inheritance
  • Overloaded Functions
  • Virtual Functions
  • Overloaded Operators
  • Pure Virtual Functions
  • Exception Handling
  • References & Constants
  • Standard Template Library
  • New and Delete
  • STL Containers

Prerequisites:

 

Comments

Latest comments from students

User: christinehejnal

Instructor comments: The material was made clear, however I don't agree that she shouldn't have catered towards the people not taking the exam.

Facilities comments: The facilities were cold and very noisy, I found it hard to concentrate.

User: mamacker1

Instructor comments: Informative instructor. Definitely not monotone. I'd recommend it to my sister if I had one.

Liked the class?  Then let everyone know!

PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!