N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)

Course Overview:

The Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) course gives you the knowledge and skills needed to configure, troubleshoot, and manage enterprise wired and wireless networks. You’ll also learn to implement security principles, implement automation and programmability within an enterprise network, and how to overlay network design by using SD-Access and SD-WAN solutions.

Attendees to N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) will receive TechNow approved course materials, expert instruction, and prepare you to take the 350-401 Implementing Cisco® Enterprise Network Core Technologies (ENCOR) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers
Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts
Troubleshoot Layer 2 connectivity using VLANs and trunking
Implementation of redundant switched networks using Spanning Tree Protocol
Troubleshooting link aggregation using Etherchannel
Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)
Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6
Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
Describe the virtualization technology of servers, switches, and the various network devices and components
Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)
Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture
Describe wireless roaming and location services
Describe how APs communicate with WLCs to obtain software, configurations, and centralized management
Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-Shared Key (PSK) wireless client authentication on a WLC
Troubleshoot wireless client connectivity issues using various available tools
Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager
Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting
Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP
Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits
Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features
Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience
Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
Explain basic Python components and conditionals with script writing and analysis
Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
Describe APIs in Cisco DNA Center and vManage

Prerequisites:

CCNA certification
Implementation of Enterprise LAN networks
Basic understanding of Enterprise routing and wireless connectivity
Basic understanding of Python scripting

Comments

Latest comments from students

User: don.seguin

Instructor comments: Tim was a great.

Facilities comments: The classroom was great.

User: jrtrussell

Instructor comments: Awesome

Facilities comments: Great

Liked the class? Then let everyone know!

TN-959: UNIX Security Administrator Course

Course Overview:

The UNIX Security Administrator Prep is a hands-on course that covers how to secure and audit UNIX and Linux operating systems. This includes concepts such as Rootkits, Buffer overflows, and monitoring UNIX/Linux systems.

Attendees to TN-959: Unix Security Administratorwill receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

AIDE
Apache
Best Practices for Kernel Tuning and Warning Banners
Boot Services
Chroot()
DNS- BIND
DNSSec
Evidence Collection and Preservation
Forensic Analysis
Forensic Preparation and Incident Handling
Host Based Firewalls – iptables
Intro to Forensics
OS Install and Patching
Physical, User Account, and Password Access Control
Se Linux
Sendmail
SSH
Stack Smashing
Sudo
Syslog-NG
UNIX Logging

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, networking, and security experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: wbcarter

Instructor comments: Good Stuff. Thanks!

User: ryuhas

Instructor comments: Very Good Instructor

Facilities comments: Facilities was great. Location had a lot to be desired. To much traffic and accidents trying to get here.

Liked the class? Then let everyone know!

CT-395: CySA+ Cybersecurity Analyst

Course Overview:

CT-395: CompTIA CySA+ Cybersecurity Analyst is for IT professionals looking to gain IT security analyst skills, and for those following the recommended skills pathway to achieve cybersecurity mastery. It provides a bridge between CompTIA Security+ (CT-325) and CompTIA Advanced Security Practitioner (CASP,CT-425), thus completing a certification path within the CompTIA family of certifications. As attackers have learned to evade traditional signature-based solutions, an analytics-based approach has become extremely important. CySA+ applies behavioral analytics to the IT security market to improve the overall state of security. The CompTIA Cybersecurity Analyst (CySA+) certification verifies that successful candidates have the knowledge and skills required to configure and use threat detection tools, perform data analysis and interpret the results to identify vulnerabilities, threats and risks to an organization, with the end goal of securing and protecting applications and systems within an organization. Let us help you bridge this gap, and leave you prepared for the certification exam (CS0-002).

TechNow is a CompTIA partner uses official CompTIA CySA+ curriculum.

Dates/Locations:

Date/Time	Event
09/08/2025 - 09/12/2025 08:00 -16:00	CT-395: CySA+ Cybersecurity Analyst TechNow, Inc, San Antonio TX
12/01/2025 - 12/05/2025 08:00 -16:00	CT-395: CySA+ Cybersecurity Analyst TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

Threat Management
Vulnerability Management
Cyber Incident Response
Security Architecture and Tool Sets

Prerequisites:

While there is no required prerequisite, the CompTIA CySA+ certification is intended to follow CT-325: Security+ or equivalent experience. It is recommended for CompTIA CySA+ candidates to have the following:

3-4 years of hands-on information security or related experience
Network+, Security+, or equivalent knowledge.

Comments

Latest comments from students

Liked the class? Then let everyone know!

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations:

No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

Trademark Recognition

(ISC)², CBK, and CISSP are registered marks of the International Information Systems Security Certification Consortium in the United States and other countries.

Access, Excel, Hyper-V, Outlook, Microsoft, SharePoint, Silverlight, SQL Server, Visual Basic, Win32, Windows, Windows PowerShell and Windows Server are registered trademarks of Microsoft Corporation.

Adobe, Acrobat, Flash and Photoshop are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries

Amazon Web Services is a trademark of Amazon.com, Inc.

Android is a trademark of Google Inc.

APMG-International Change Management, The APMG-International Change Management and Swirl Device logo, APMG-International AgilePM and The APMG-International AgilePM and Swirl Device logo are trademarks of The APM Group Limited.

Certified Ethical Hacker (CEH) is a registered trademark of EC-Council.

Cisco is a registered trademark of Cisco Systems Inc.

CMMI® is registered in the U.S. Patent and Trademark Office by Carnegie Mellon University.

IIBA®, the IIBA® logo, BABOK® and Business Analysis Body of Knowledge® are registered trademarks owned by International Institute of Business Analysis. These trademarks are used with express permission of International Institute of Business Analysis.

CAPM, Certified Associate in Project Management (CAPM), PMP, Project Management Professional (PMP), PMI-ACP, PMI Agile Certified Practitioner (PMI-ACP), PMBOK, and the R.E.P. Logo are marks of Project Management Institute, Inc.

CBAP® and CCBA® are registered certification marks owned by International Institute of Business Analysis. These trademarks are used with express permission of International Institute of Business Analysis.

Certified Business Analysis Professional, Certification of Competency in Business Analysis, Endorsed Education Provider, EEP and the EEP logo are trademarks owned by International Institute of Business Analysis. These trademarks are used with express permission of International Institute of Business Analysis.

COBIT is a trademark of ISACA, registered in the U.S. and other countries.

CompTIA A+ and CompTIA Network+ are registered trademarks of the Computing Technology Industry Association, Inc.

CompTIA CASP and CompTIA Cloud Essentials are trademarks of the Computing Technology Industry Association, Inc.

GIAC and associated certifications: GSEC, GPEN, GXPN, GCFW, GCUX, GCWN, GCIA, GREM are registered trademarks of the SANS Institute

Hadoop is a registered trademark of the Apache Software Foundation.

Hibernate is a registered trademark and servicemark of Red Hat, Inc.

iPad, iPhone, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

ITIL®, PRINCE2® and MSP® are registered trademarks of AXELOS Limited.

JavaScript, JavaServer, JavaServer Pages, Enterprise JavaBeans, MySQL and PL/SQL are trademarks of Oracle Corporation.

Linux is a registered trademark of Linus Torvalds.

Java and Oracle are registered trademarks of Oracle Corporation.

Palo Alto Networks, PAN-OS, App-ID, Content-ID, Url-ID, GlobalProtect, Wildfire, and Panorama are trademarks of Palo Alto Networks, Inc.

"Python" is a registered trademark of the Python Software Foundation, used by Learning Tree International with permission from the Foundation.

Red Hat and Red Hat Enterprise Linux are registered trademarks of Red Hat, Inc. in the United States and other countries.

SANS and associated certifications: GSEC, GPEN, GXPN, GCFW, GCUX, GCWN, GCIA, GREM are registered trademarks of the SANS Institute

SAP Crystal Reports is the registered trademark of SAP AG in Germany and in several other countries.

Scrum Alliance REP^SM is a service mark of Scrum Alliance, Inc. Any unauthorized use is strictly prohibited.

TechNow® is a registered trademark of TechNow Incorporated.

The Swirl logo™ is a trademark of AXELOS Limited.

Transact-SQL is a trademark of Sybase, Inc.

UNIX is a registered trademark of The Open Group.

VMware is a registered trademark of VMware, Inc. in the United States and/or other jurisdictions.

XML is a trademark of MIT, INRIA or Keio on behalf of the World Wide Web Consortium.