Test2

  

http://technow.www162-254-253-232.a2hosted.com/palo-alto-firewall-essentials-fasttrack-training-class-course-pa-215/

  

Course Overview:

PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-222: Palo Alto Networks Panorama Essentials.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications.

Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:  

Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

  

Like the class?  Then let everyone know!

TN-999: Reverse Engineering Malware Course

Course Overview:

This course is designed for professionals that are expected to do malware analysis. A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics Reverse Engineering Malware.

Attendees to TN-999: Reverse Engineering Malware will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Toolkit and Lab Assembly
  • Malware Code and Behavioral Analysis Fundamentals
  • Malicious Static and Dynamic Code Analysis
  • Collecting/Probing System and Network Activities
  • Analysis of Malicious Document Files
  • Analyzing Protected Executables
  • Analyzing Web-Based Malware
  • DLL Construction and API Hooking
  • Common Windows Malware Characteristics in x86 Assembly
  • Unpacking Protected Malware
  • In-Depth Analysis of Malicious Browser Scripts, Flash Programs and Office
  • In-Depth Analysis of Malicious Executables
  • Windows x86 Assembly Code Concepts for Revers-Engineering Memory Forensics for Rootkit Analysis

Prerequisites:

  • Strong understanding of core systems and network concepts
  • Exposure to programming and assembly concepts
  • Comfortable with command line access

Comments

Latest comments from students

User: marcus.osullivan

Instructor comments: Good stuff. I like the beginning half where there was help from an additional instructor to facilitate fixing computer errors that inevitably popped up.

Facilities comments: The baby deer were neat! I like the resort.

Liked the class?  Then let everyone know!

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-949: Certified Firewall Analyst Course

Course Overview:

This is a hands-on course that covers many of the concepts of securing the perimeter of an organization. This includes concepts such as intrusion detection, packet filtering, and central logging.

A skills focus enables the student to better absorb the subject matter and perform better on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Firewalls.

This course is an excellent precursor to PA-215 Palo Alto Firewall Essentials FastTrack.

Attendees to TN-949: Certified Firewall Analyst Prep will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Analyzing Network and Wireless Design
  • Creating and Auditing a Rulebase
  • Firewall Assessment and Penetration Testing
  • Host-Based Detection and DLP
  • Incident Detection and Analysis
  • IOS and Router Security
  • IPv6 and ICMPv6
  • Log Collection and Analysis
  • NAT and Proxies
  • Netfilter IPtables
  • Network Access Control
  • Network-Based Intrusion Detection
  • Packet Filters and Inspection
  • Packet Fragmentation
  • Perimeter Concepts and IP Fundamentals
  • Securing Hosts and Services
  • TCP/IP Protocols
  • VPN Design and Auditing
  • VPN Implementation

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking and security  experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-979: Intrusion Analyst Course

Course Overview:

Intrusion Analyst is a hands-on course that covers intrusion detection in-depth. This includes concepts such as the use of Snort, network traffic analysis, and IDS signatures.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of packet and intrusion analysis.

Attendees to TN-979: Intrusion Analyst will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Advanced Snort Concepts
  • Analyst Toolkit
  • Domain Name System (DNS)
  • Examining Packet Crafting
  • Examining Packet Header Fields
  • Fragmentation
  • ICMP Theory
  • IDS Interoperability
  • IDS Patterns
  • IDS/IPS Management & Architecture Issues
  • Indications, Warnings & Traffic Correlation
  • IPv6
  • Microsoft Protocols
  • Network Traffic Analysis
  • NIDS Evasion, Instertion & Checksums
  • Snort Fundamentals & Configuration
  • Snort GUIs & Sensor Management
  • Snort Performance, Active Response & Tagging
  • Snort Rules
  • Stimulus Response
  • TCPdump Fundamentals
  • TCP/IP Fundamentals
  • Wireshark Fundamentals
  • Writing TCPdump Filters

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: Tosha

Instructor comments: Dave was an excellent instructor. He is very informative and knowledgeable in the course and the material. I have enjoyed the class and I would take another course with him as the instructor.

Facilities comments: Very nice and clean hotel.

User: buckey26

Instructor comments: Dave was one of the best instructors I have ever had for a tech course. He broke down everything to the point where you can understand it internally.

Liked the class?  Then let everyone know!