TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security. TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Radio Frequency (RF) Fundamentals
Spread Spectrum Technologies
802.11 Network Architecture
Physical & MAC Layers
Hardware Installation, Configuration, & Management
Antennas & Accessories
Wireless Network Management
Troubleshooting Wireless LANs
Site Surveying
Wireless LAN Security
Organizations & Standards

Prerequisites:

Attendees should have network administration skills. These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class? Then let everyone know!

PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231)

Course Overview: PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231) Training Class is a two-day course that teaches students strategies in defense against cyberthreats. Successful completion of this course enables administrators to better understand the threat landscape. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-242: Palo Alto Networks Firewall Manaage Cyberthreats (EDU-231) Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 2 days

Course Objectives: Students attending this training course will gain an understanding of cyberthreats and their characteristics. Students will learn how to manage cyberthreats using security policies, profiles, and signatures to protect their network against emerging threats.

Day 1

Mod 1: Threat Landscape
- Advanced Persistent
- Threats
- Data Breaches and Tactics
- Threat Management
- Strategies
Mod 2: Integrated
- Approach to Threat
- Protection
- Integrated Approach to
- Protection
- Next-Generation Firewall
- Advanced Endpoint
- Protection
Mod 3: Network Visibility
- Zero Trust Model
- SSL Decryption
- Decryption Policy
Mod 4: Reducing the Attack
- Surf
- ection

Day 2

Mod 5: Handling Known
- Threats
- WildFire Analysis
- Security Profiles
Mod 6: Handling Unknown
- Traffic and Zero-Day Exploits
- WildFire
- Researching Threat Events
- Identifying Unknown
- Applications
Mod 7: Investigating
- Breaches
- Identify IOCs Using
- App-Scope
- Log Correlation
- Finding Infected Host
Mod 8: Using Custom
- Signatures
- Creating Custom App-IDs
- Threat Signatures

A

Prerequisites:

Students must complete the PA-213: Install, Configure, and Manage course
Understanding of network concepts, including routing, switching, and IP addressing
In-depth knowledge of port-based security and security technologies such as IPS, proxy, and content filtering

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course

Course Overview:

This course is developed for those individuals seeking to pass the Project Management Institute’s PMI-ACP Exam. PMI Agile Certified Practitioner (PMI-ACP)® is one of the newest certifications offered by PMI and is expected to become the industry standard certification for agile over the next few years. The PMI-ACP® certification clearly illustrates to colleagues, organizations or even potential employers that students are ready and able to lead in this new age of product development, management, and delivery.

While preparing you for the exam, you will explore various approaches to agility including Scrum, Kanban, Lean, Extreme Programming (XP), and Test-Driven Development (TDD). By the end of the course, you’ll have mastered the practices and techniques that Agile practitioners use to improve team performance, resolve problems and engage in continuous process improvements and be equipped with job-ready skills.

This course provides students with 21 contact hours in agile practices to help attain the Project Management Institute (PMI)® credential. PMI® and PMI-ACP® are registered marks of the Project Management Institute, Inc.

Attendees to PM-224: PMI Agile Certified Practitioner (PMI-ACP) Prep Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time	Event
08/11/2025 - 08/13/2025 08:00 -16:00	PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course TechNow, Inc, San Antonio TX
11/17/2025 - 11/19/2025 08:00 -16:00	PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course TechNow, Inc, San Antonio TX

Duration: 3 Days

Course Objectives:

Agile Principles and Mindset
Value-driven delivery
Stakeholder engagement
Team performance
Adaptive planning
Problem detection and Resolution
Continuous Improvement

Prerequisites:

Secondary degree
21 contact hours of training in agile practices
12 months of general project experience within the last 5 years. A current PMP^® or PgMP^® will satisfy this requirement but is not required to apply for the PMI-ACP
8 months of agile project experience within the last 3 years

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-822: Certified Information Systems Auditor (CISA) Seminar

Course Overview:

The mark of excellence for a professional certification program is the value and recognition it bestows on the individual who achieves it. The technical skills & practices the CISA promotes and evaluates are the building blocks of success in the field. Possessing the CISA designation demonstrates proficiency and is the basis for measurement in the profession. With a growing demand for professionals possessing IS audit, control and security skills, CISA has become a preferred certification program by individuals and organizations around the world. CISA certification signifies commitment to serving an organization and the IS audit, control and security industry with distinction. This course will help the student prepare to obtain this credential.

Attendees to TN-822: Certified Information Systmes Auditor (CISA) Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time	Event
10/06/2025 - 10/10/2025 08:00 -16:00	TN-822: Certified Information Systems Auditor (CISA) Seminar TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

The IS Audit Process (10%)
- Provide IS audit services in accordance with IS audit standards, guidelines, and best practices to assist the organization in ensuring that its information technology and business systems are protected & controlled.
IT Governance (15%)
- Provide assurance that the organization has the structure, policies, accountability, mechanisms and monitoring practices in place to achieve the requirements of corporate governance of IT.
System and Infrastructure Life Cycle Management (16%)
- Provide assurance that the management practices for the development/acquisition, testing, implementation, maintenance and disposal of systems and infrastructure will meet the organization's objectives.
IT Service Delivery and Support (14%)
- Provide assurance that the IT service management practices will ensure the delivery of the level of services required to meet the organization's objectives.
Protection of Information Assets (31%)
- Provide assurance that the security architecture (policies, standards, procedures and controls) ensures the confidentiality, integrity and availability of information assets.
Business Continuity and Disaster Recovery (14%)
- Provide assurance that, in the event of a disruption, the business continuity and disaster recovery processes will ensure the timely resumption of IT services, while minimizing the business impact.

Prerequisites:

A minimum of five years of professional information systems auditing, control & security work experienced is required. Experience must have been gained within the 10-year period preceding the application date for certification, or within five years from the date of initially passing the examination.

Comments

Latest comments from students

User: fsarisen

Instructor comments: Thank you Tim for all the great information! I am confident that I'll do well on the ICND exam.

User: storoy30

Instructor comments: The instructor, Tim Burkard, was very knowledgeable on the course material and skilled at explain more complex ideas.

Liked the class? Then let everyone Know!

TN-919: Penetration Tester Course

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

Attendees to TN-919:Penetration Tester course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Advanced Hash Manipulation
Command Shell vs. Terminal Access
Enumerating Users
Exploitation Fundamentals
Injection Attacks
Legal Issues
Metasploit
Moving Files with Exploits
Obtaining and Passing Password Representations
Overview of Passwords
Penetration Testing Foundations
Penetration Testing Process
Penetration Testing via the Command Line
Profiling the Target
Reconnaissance
Scanning for Targets
Using a Proxy to Attack a Web Application
Vulnerability Scanning
Wireless Crypto and Client Attacks
Wireless Fundamentals

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, networking, and security experience
This is a hands-on skill course requiring comfort with command line interaction and network communications