TN-385: TCP/IP Analysis & Implementation

Course Overview:

This course, TN-385: TCP/IP Analysis & Implementation, provides students with a comprehensive technical introduction to TCP/IP & the interworkings of TCP/IP application to UNIX, Linux and Windows in a network environment. This course begins by providing a comprehensive protocol stack analysis. It continues with extensive hands-on exercises needed to configure TCP/IP on UNIX and Windows based networks.

Attendees to TN-385: TCP/IP Analysis & Implementation will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

A thorough comprehension of each level of the protocol stack
Configuring UNIX & Windows to access internetworks
Configuring & setting up a Cisco router
Properly implementing subnets to avoid ongoing maintenance headaches
Routing & routing protocols, RIP, OSPF, and IGRP
How to troubleshoot a wide range of routing problems
All major TCP/IP application services including: FTP, TELNET, SNMP, NFS, DNS, DHCP, & WINS
How to avoid common internetworking problems
How to troubleshoot TCP/IP networks using protocol analysis techniques – snoop on Sun Workstation & Network Monitor on Windows.
How to design, build, configure, & manage TCP/IP internetworks
Applying a structured methodology for troubleshooting TCP/IP internetworks
ACL's on Cisco routers

Prerequisites:

Students should have good end-user skills in TCP/IP (FTP, TELNET, RLOGON, & MAIL).

Comments

Latest comments from students

Liked the class? Then let everyone know!

CT-215: Cloud+

Course Overview:

This course covers the knowledge and skills required to understand standard Cloud terminologies/methodologies, to implement, maintain, and deliver cloud technologies and infrastructures (e.g. server, network, storage, and virtualization technologies), and to understand aspects of IT security and use of industry best practices related to cloud implementations and the application of virtualization.

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to demonstrate cloud technologies and to effectively manage security in the cloud environment.

TechNow is a CompTIA partner and uses official CompTIA Cloud+ curriculum.

Attendees to CT-215: Cloud+ will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
11/03/2025 - 11/07/2025 08:00 -16:00	CT-215: Cloud+ TechNow, Inc, San Antonio TX

Course Duration: 5 days

Course Objectives:

Prepare to deploy cloud solutions
Deploy a pilot project
Test a pilot project deployment
Design a secure network for cloud deployment
Determine CPU and memory sizing for cloud deployments
Plan Identity and Access Management for cloud deployments
Analyze workload characteristics to ensure successful migration to the cloud
Secure systems to meet access requirements
Maintain cloud systems
Implement backup, restore, and business continuity measures
Analyze cloud systems for required performance
Analyze cloud systems for anomalies and growth forecasting
Troubleshoot deployment, capacity, automation, and orchestration issues
Troubleshoot connectivity issues
Troubleshoot security issues

Course Prerequisites:

Security+, Network+, CASP or equivalent experience
Managing or administering at least one of UNIX, Windows, Databases, networking, or security

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-595: VoIP Security Analysis and Design

Course Overview:

As VoIP (Voice-over IP) is integrated into the operations of many missions, it is imperative to understand its security ramifications. In the N-595: VoIP Security Analysis and Design class the objectives are designed for those who are chartered with the responsibility of securing networks and application environments that incorporate VoIP. Topics include how VoIP works, its interactions with the network, its vulnerabilities and mitigations. Focus is on leading open source and proprietary technologies utilizing Asterisk and Cisco and the protocols SIP, H.323, RTP, MGCP, and Skinny. Other protocols such as Nortel's UNIStim will be addressed. As for Cisco, security pieces in the VoIP CallManager servers, Catalyst switches, IOS-based routers, and ASA firewalls, amounts to several different platforms, each with its own management interface and lockdown procedures. Various open source tools including those in BackTrack are used for VoIP attacks. A task list of actions for securing enterprise VoIP is carried out in hands-on labs, performed on Cisco phones, routers, switches, and ASA firewalls.

Attendees to N-595: VoIP Security Analysis and Design will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

VoIP Architecture
VoIP Signaling and media protocols
Common VoIP authentication mechanisms
Common VoIP encryption techniques
VoIP protocol analysis with Wireshark
Maintaining QoS while mitigating DoS
VoXML, XML, and application integration security
Converged network security design and implementation
Impact of NAT and firewalls
SIP, H.323, and MGCP vulnerabilities
VPN, IPsec and SRTP to secure VoIP services
Penetration testing with open source tools
Attacks for Eavesdropping, call redirection, and DoS
Design of hacked firmware virtualization layer
Concise lockdown steps for network hardware and VoIP

Prerequisites:

This is an advanced Information Security Course which requires basic Windows & UNIX competency
Certification or 2 years of experience in these operating systems is highly recommended
As well as an understanding of TCP/IP

Comments

Latest comments from students

Liked the class? Then let everyone know!

Observations of Instructor Led Training with Real Hardware

TechNow has heard many students talk about virtualized/remote training that TechNow Does Not Do. While training our most recent offering of PA-215: Palo Alto Networks Firewall Essentials FastTrack a student told his story of how he endend up in our course. His story we have heard for other technologies like Cisco, VMware, BlueCoat and other products.

A large percentage of training is moving to the virtualized/remote lab environments. Students are asked to use some variant of remote access software and remote into the training company's lab environment. Our student in our Palo Alto Networks Firewall course informed us that he went to a very costly offering of that course from the vendor and was not able to perform any labs. There were either network connectivity issues, or issues with the remote access software, or other problems. The whole training experience was very frustrating and not productive.

We keep our labs open to students if they would like after hours, or before hours access. Repeatedly going through a lab engrains that knowledge for later recall. Touching hardware is so critical in understanding the problems that arise when a cable comes loose, or a cable gets plugged in the wrong port. There are other scenarios such as just pulling the power cable, or turning off a power strip, or accidently overwriting a configuration. These disaster scenarious requires hands-on physical access to hardware. Preventing and recovering from disasters is what it's all about, and that requires hands-on, instructor led, real hardware.

L-245: Linux System Administration I

Course Overview:

In this course students will learn to install the Linux™ operating system, to administer users and software, to use vi, basic Linux security, process control, file system maintenance, backup and recovery, including some basic networking concepts. This course insures that students have the skills to configure all desktop and client side related activity.

Attendees to L-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Linux operating system installation
Hardware Issues
LILO & GRUB Configuration
Managing the Linux file system
Boot Process
Customization of setup files
System Startup
Run Levels
Network Services
User Management
Changing Passwords
Monitoring, accessing & restricting root system access
Administration Tools
Disk Management
Quotas
Process Control
Installing & removing software & patches
Network Configuration
Client side components of NFS, Samba, NTP, NIS
Printing
Backup and Recovery
Using utilities for process control, locating files & automating maintenance tasks

Prerequisites:

Students should have an understanding of all basic UNIX commands as well as variable substitution, wild card expansion, command pipes, permissions, the grep and find commands.
These prerequisites can be met through completion of TN-125: Introduction to UNIX & Linux and six month’s experience with Linux.