Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations:

No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       

Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students


Like the class?  Then let everyone know!

Course Overview:

The  UNIX Security Administrator Prep is a hands-on course that covers how to secure and audit UNIX and Linux operating systems. This includes concepts such as Rootkits, Buffer overflows, and monitoring UNIX/Linux systems.

Attendees to TN-959: Unix Security Administratorwill receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • AIDE
  • Apache
  • Best Practices for Kernel Tuning and Warning Banners
  • Boot Services
  • Chroot()
  • DNS- BIND
  • DNSSec
  • Evidence Collection and Preservation
  • Forensic Analysis
  • Forensic Preparation and Incident Handling
  • Host Based Firewalls – iptables
  • Intro to Forensics
  • OS Install and Patching
  • Physical, User Account, and Password Access Control
  • Se Linux
  • Sendmail
  • SSH
  • Stack Smashing
  • Sudo
  • Syslog-NG
  • UNIX Logging

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking, and security experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

 

Comments

Latest comments from students


User: wbcarter

Instructor comments: Good Stuff. Thanks!


User: ryuhas

Instructor comments: Very Good Instructor

Facilities comments: Facilities was great. Location had a lot to be desired. To much traffic and accidents trying to get here.


Liked the class?  Then let everyone know!

 

Course Overview:

TechNow has worked worldwide enterprise infrastructures for over 30 years and has developed demos and labs to exemplify the techniques required to demonstrate technologies that effectively support CTI.  This course integrates well with our courses TN-575: Open Source Network Security Monitoring and TN-865: Wireshark Network Traffic and Security Analysis .

TechNow develops Cyber Ranges and makes them available for conferences in support of annual meetings for Cyber Threat Response Teams.  Developing scenarios and reacting to them appropriately is a big part of the value in understanding the contexts required to comprehend valuable CTI.   As with many advanced TechNow security courses, there is a large hands-on ratio.  This course helps Cyber Protection Teams (CPT), Defensive Cyber Operations (DCO), and Mission Defense Teams (MDT) to collect, analyze and apply targeted cyber intelligence to defensive operations in order to proactively act on and tune response to attacks by cyber adversaries.  CPT, DCO, and MDT can take preemptive action by utilizing CTI, understanding CTI tools, techniques and procedures (TTPs) needed to generate and consume timely and relevant intelligence to improve resilience and prevention.

This course focuses on the collection, classification, and exploitation of knowledge about adversaries and their TTPs. .  MDT puts us close the mission and helps define the internal context to be analyzed against the CTI.  TechNow pushes the student to truly understand how to think about and use CTI to make a difference.

Attendees to TN-905: Cyber Threat Intelligence Analysis will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Learn to comprehend and develop complex scenarios
  • Identify and create intelligence requirements through practices such as threat modeling
  • Utilize threat modeling to drive intelligence handling and practices 
  • Breakdown tactical, operational, and strategic-level threat intelligence
  • Generate threat intelligence to detect, respond to, and defeat focused and targeted threats
  • How to collect adversary information creating better value CTI
  • How to filter and qualify external sources, mitigating low integrity intelligence
  • Create Indicators of Compromise (IOCs) in formats such as YARA, OpenIOC, and STIX
  • Move security maturity past IOCs into understanding and countering the behavioral tradecraft of threats
  • Breaking down threats mapped against their tradecraft to tweak IOCs
  • Establish structured analytical techniques to be successful in any security role
  • Learn and apply structured principles in support of CTI and how to communicate that to any security role.

Course Prerequisites:

Comments

Latest comments from students


 

Liked the class?  Then let everyone know!

Course Overview:

This course is designed for professionals that are expected to do malware analysis. A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics Reverse Engineering Malware.

Attendees to TN-999: Reverse Engineering Malware will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Toolkit and Lab Assembly
  • Malware Code and Behavioral Analysis Fundamentals
  • Malicious Static and Dynamic Code Analysis
  • Collecting/Probing System and Network Activities
  • Analysis of Malicious Document Files
  • Analyzing Protected Executables
  • Analyzing Web-Based Malware
  • DLL Construction and API Hooking
  • Common Windows Malware Characteristics in x86 Assembly
  • Unpacking Protected Malware
  • In-Depth Analysis of Malicious Browser Scripts, Flash Programs and Office
  • In-Depth Analysis of Malicious Executables
  • Windows x86 Assembly Code Concepts for Revers-Engineering Memory Forensics for Rootkit Analysis

Prerequisites:

  • Strong understanding of core systems and network concepts
  • Exposure to programming and assembly concepts
  • Comfortable with command line access

Comments

Latest comments from students



User: marcus.osullivan

Instructor comments: Good stuff. I like the beginning half where there was help from an additional instructor to facilitate fixing computer errors that inevitably popped up.

Facilities comments: The baby deer were neat! I like the resort.


Liked the class?  Then let everyone know!

Course Overview:

This course is very hands-on with respect to SP 800-53 controls as related to ICD-503, leveraging experience with DCD 6/3, and incorporating a broad array of technologies found in the field.  Assessors and Auditors have to face many technologies that are not part of the main stream.  TechNow has gone to great efforts to build a very broad, comprehensive, and complex lab to simulate many scenarios and architectures.  Technologies such as a network appliance that is not a typical infrastructure product, a radio/satellite communications device, or many other technologies that build up a weapon system.  Students learn how controls are integrated into many different devices and how they fit in the overall security architecture of monitoring, reporting, and compliance testing.

Directly discussed are overlays for different requirements i.e.: tactical, medical, network type: JWICS, SIPR; IC or AF.  TechNow has developed a funnel concept to overlays to exemplify the encapsulation of a control within different requirements.  TechNow has over 15 years experience in Trusted Solaris/Trusted Extensions and labeled security.  Cross Domain overlays are presented that fits the work flow of an assesor.  PII overlays and any overlays that an organization uses and can be made available are also presented.  

This course allows the student to leverage years of experience in DoD DCD 6/34 for transition to the Risk Management Framework (RMF) applied to the Intelligence Community as mandated by ICD 503.  Utilizing NIST SP 800-37 to establish a baseline of RMF knowledge, the student learns how to integrate the NIST pubs to provide cohesive information assurance architectures and compliance.  ICD 503 scorecard evaluations are integral in demonstrating a successful ICD 503 compliance program.  TechNow's ICD 503 course provides students with the skill to assess security programs and evaluate ICD 503 compliance to build an improvement and sustainable program for score consistency.  TechNow's instructors have unparralleled expertise in federal compliance initiatives, and we bring this expertise instructing students on the complete life cycle of RMF.

More than a simple checklist, we instruct students not only how to validate essential security controls, programs, and metrics, but that they are operating effectively.  The student leaves the course knowing how to: identify gaps where controls, programs, or metrics are incomplete, missing or ineffective, and provide actionable findings and recommend remediation strategies.  Students learn to internalize NIST pubs to meaningul and effective IA guidelines and work with the Body of Evidence templates which include: Risk Assessment Report (RAR), Systems Security Plan (SSP), Security Assessment Report (SAR), and Plans of Action and Milestone (POAM).

TechNow training materials are aligned with the most recent set of National Institute of Standards and Technology (NIST), Committee on National Security Systems (CNSS), and Office of the Director of National Intelligence (ODNI) policies standards, processes, policies and instructions to be addressed/explained include ICD 503, ICS 503-1, ICS 500-16, ICS 500-18, ICS 500-27, ICD 502, NIST SP 800-37, NIST SP 800-30, NIST SP 800-53, NIST SP 800-53A, NIST SP 800-137, NIST SP 800-47, CNSSP 22, CNSSI 1253, and CNSSI 4009.

A majority of time is spent on in-depth compliance review of NIST SP 800-53 controls.  Instruction discusses which method should be used to test and validate each security control and what evidence should be gathered.  This course is not theory or death by power point.  Real scenarios are presented as exercises.  A complete live cyber range simulating the IC is utilized for hands-on labs for techniques of validating and documenting compliance of NIST SP 800-53 controls as related to ICD 503.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Establish a baseline of RMF knowledge
  • Validate essential security controls, programs, and metrics
  • DoD DCD 6/3 to ICD 503 Transition
  • Lab Environtment and the Cyber Range
  • Overlays: Tactical, Medical, Network type(JWICS, SIPR; IC or AF), Cross Domain, PII
  • Risk Assessment Report (RAR)
  • Systems Security Plan (SSP)
  • Security Assessment Report (SAR)
  • Plans of Action and Milestone (POAM)

Prerequisites:

Experience in the field of auditing and assesments.

Comments

Latest comments from students


Liked the class?  Then let everyone know!