PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations:

No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course

Course Overview:

This course is developed for those individuals seeking to pass the Project Management Institute’s PMI-ACP Exam. PMI Agile Certified Practitioner (PMI-ACP)® is one of the newest certifications offered by PMI and is expected to become the industry standard certification for agile over the next few years. The PMI-ACP® certification clearly illustrates to colleagues, organizations or even potential employers that students are ready and able to lead in this new age of product development, management, and delivery.

While preparing you for the exam, you will explore various approaches to agility including Scrum, Kanban, Lean, Extreme Programming (XP), and Test-Driven Development (TDD). By the end of the course, you’ll have mastered the practices and techniques that Agile practitioners use to improve team performance, resolve problems and engage in continuous process improvements and be equipped with job-ready skills.

This course provides students with 21 contact hours in agile practices to help attain the Project Management Institute (PMI)® credential.  PMI® and PMI-ACP® are registered marks of the Project Management Institute, Inc.

Attendees to PM-224: PMI Agile Certified Practitioner (PMI-ACP) Prep Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time Event
11/17/2025 - 11/19/2025
08:00 -16:00 		PM-224: PMI Agile Certified Practitioner (PMI-ACP)® Prep Course
TechNow, Inc, San Antonio TX

Duration: 4 Days

Course Objectives:

  • Agile Principles and Mindset
  • Value-driven delivery
  • Stakeholder engagement
  • Team performance
  • Adaptive planning
  • Problem detection and Resolution
  • Continuous Improvement

Prerequisites:

  • Secondary degree
  • 21 contact hours of training in agile practices
  • 12 months of general project experience within the last 5 years. A current PMP® or PgMP® will satisfy this requirement but is not required to apply for the PMI-ACP
  • 8 months of agile project experience within the last 3 years

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-223: Advanced Shell Programming

 

Course Overview:

The course teaches students to use the sort, grep, sed, & awk utilities within Unix. Systems administrators, Unix users, & programmers benefit from the course showing them how to use the command line applications of sort, grep, sed, & awk commands as well as using sed & awk scripts that develop the users skills with the full power of these utilities.

Attendees to TN-223: Advanced Shell Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 3 Days

Course Objectives:

  • Sorting files by line or field
  • Regular Expressions (meta character) with grep commands to locate specific lines in files
  • Performing non-interactive editing tasks with the sed command
  • Writing simple sed scripts to perform complex editing tasks
  • Using awk variables & arrays to sort data
  • Employing awk programs to manipulate numeric & textual data
  • Performing formatted printing in awk
  • Writing simple awk programs to write reports from data files
  • Using built-in awk functions & defining new functions
  • Write awk programs that make decisions based on numeric or string comparisons (branches & loops)
  • Grep, egrep extended metacharacters, combinations-lab advanced combinations- lab Sed
  • Basic commands- Lab, Advanced commands- Lab, Advanced scripting -Lab
  • Miscellaneous commands Tr, sort, cut, paste, pr -Lab

Prerequisites:

  • TN-125: Introduction to UNIX & Linux
  • TN 215: Shell Programming.
  • Students should have a basic knowledge of UNIX commands including rm, cp, man, cat, & mkdir. Navigating directory structure using commands such as ls, cp, & pwd. Creating and editing files with the vi editor or text editor. Use of basic programming constructs, & commands such as variables & loops & how to write a simple program in a programming language.

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

CompTIA

Increase your credibility, job security, and career opportunities by reaching your goal and getting certified!  TechNow offers many CompTIA bootcamp style courses in which we administer an exam on the last day of class.  We have a proven testing program that will get you the results you want!

in   

VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives

 

Course Overview:

This course explores the VMware Infrastructure and related security, which consists of VMware ESX Server & VMware Virtual Center Server. We will look at both the design environments and operational processes of the VMware Infrastructure including security. This course provides IT architects with the insight needed to tackle tough issues in server virtualization such as virtual machine technologies, storage infrastructure, and designing clustered environments with security practices included. Extensive hands-on labs provide for a rich student experience.

Hypervisors and their supporting environment require attention to security due to the aggregated risk of hosting multiple virtual servers. This course explores the security of virtualized environments. Student configure ESXi by learning to manage the security and risk between ESXi, virtual servers and security integration of ESXi to the physical network infrastructure including appropriate segregation from other sensitive networks and management networks. How to configure virtual networks when some hosts are dual or multi homed, but internally segregate between the two or more connected networks with different security levels. Appropriate integration of zero-clients and thin clients. Configuration of defensive measures on hosts, servers, hypervisors within the virtual environment and practices for those guarding it externally. Integration of Active Directory and other AAA/CIA related services relative to a virtualized environment.

Students are also walked through DoD ESXi Security Technical Implementation Guide (STIG). Introduction to the impact of Intel Trusted Execution Technology integrated with ESXi to create a trusted platform for virtual machines. Additionally the instructor walks the students through NIST Special Publication 800-125A: Security Recommendations for Hypervisor Deployment on Servers, and NIST Special Publication 800-125B: Secure Virtual Network Configuration for Virtual Machine (VM) Protection.

Attendees to “VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives” will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

• Virtual Infrastructure Overview
• ESX and ESXi Server Installation
• Configuration of Networking, Scalability and Security
• Storage
• Install and Configure vCenter Server and Components
• Creation, Deployment, Management, and Migration of Virtual Machines
• Utilize vCenter Server for Resource Management
• Utilize vCenter Server for Virtual Machine Access Control and User Managment
• Use vCenter Server to increase scalability
• Monitoring Your Environment
• Data & Availability Protection Troubleshooting
• Use VMware vCenter Update Manager to apply ESXi patches
• Use vCenter Server to manage vMotion, HA, DRS and data protection.