N-595: VoIP Security Analysis and Design

Course Overview:

As VoIP (Voice-over IP) is integrated into the operations of many missions, it is imperative to understand its security ramifications.  In the N-595: VoIP Security Analysis and Design class the objectives are designed for those who are chartered with the responsibility of securing networks and application environments that incorporate VoIP.   Topics include how VoIP works, its interactions with the network, its vulnerabilities and mitigations.  Focus is on leading open source and proprietary technologies utilizing Asterisk and Cisco and the protocols SIP, H.323, RTP, MGCP, and Skinny.  Other protocols such as Nortel's UNIStim will be addressed.  As for Cisco, security pieces in the VoIP CallManager servers, Catalyst switches, IOS-based routers, and ASA firewalls, amounts to several different platforms, each with its own management interface and lockdown procedures.   Various open source tools including those in BackTrack are used for VoIP attacks.  A task list of actions for securing enterprise VoIP is carried out in hands-on labs, performed on Cisco phones, routers, switches, and ASA firewalls.

Attendees to N-595: VoIP Security Analysis and Design will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • VoIP Architecture
  • VoIP Signaling and media protocols
  • Common VoIP authentication mechanisms
  • Common VoIP encryption techniques
  • VoIP protocol analysis with Wireshark
  • Maintaining QoS while mitigating DoS
  • VoXML, XML, and application integration security
  • Converged network security design and implementation
  • Impact of NAT and firewalls
  • SIP, H.323, and MGCP vulnerabilities
  • VPN, IPsec and SRTP to secure VoIP services
  • Penetration testing with open source tools
  • Attacks for Eavesdropping, call redirection, and DoS
  • Design of hacked firmware virtualization layer
  • Concise lockdown steps for network hardware and VoIP

Prerequisites:

  • This is an advanced Information Security Course which requires basic Windows & UNIX competency
  • Certification or 2 years of experience in these operating systems is highly recommended
  • As well as an understanding of TCP/IP

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-385: TCP/IP Analysis & Implementation

Course Overview:

This course, TN-385: TCP/IP Analysis & Implementation, provides students with a comprehensive technical introduction to TCP/IP & the interworkings of TCP/IP application to UNIX, Linux and Windows in a network environment.  This course begins by providing a comprehensive protocol stack analysis.  It continues with extensive hands-on exercises needed to configure TCP/IP on UNIX and Windows based networks.

Attendees to TN-385: TCP/IP Analysis & Implementation will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • A thorough comprehension of each level of the protocol stack
  • Configuring UNIX & Windows to access internetworks
  • Configuring & setting up a Cisco router
  • Properly implementing subnets to avoid ongoing maintenance headaches
  • Routing & routing protocols, RIP, OSPF, and IGRP
  • How to troubleshoot a wide range of routing problems
  • All major TCP/IP application services including: FTP, TELNET, SNMP, NFS, DNS, DHCP, & WINS
  • How to avoid common internetworking problems
  • How to troubleshoot TCP/IP networks using protocol analysis techniques – snoop on Sun Workstation & Network Monitor on Windows.
  • How to design, build, configure, & manage TCP/IP internetworks
  • Applying a structured methodology for troubleshooting TCP/IP internetworks
  • ACL's on Cisco routers

Prerequisites:

  • Students should have good end-user skills in TCP/IP (FTP, TELNET, RLOGON,  & MAIL).

Comments

Latest comments from students

Liked the class?  Then let everyone know!

DoD 8570

DoD 8570 Training

The Department of Defense requires that all information assurance personnel must become compliant with IT and security certification standards.

DoD 8570 training, also called Information Assurance training, is available through TechNow to provide you with the certification that is required.  Your DoD 8570 training  ( information assurance training ) at TechNow will provide you with all of the courses necessary to receive your DoD 8570.01-M certification.

Ongoing open enrollment through TechNow is availble for our DoD 8570.01-M courses.

Please review the full & updated DoD approved IA baseline certifications aligned to each category & level of the IA workforce:

Note: The Certifications in red are recently added to approved list as of 2/4/19

For further information or to schedule for classes, call us at 800-324-2294

in   

Observations of Instructor Led Training with Real Hardware

TechNow has heard many students talk about virtualized/remote training that TechNow Does Not Do.  While training our most recent offering of PA-215: Palo Alto Networks Firewall Essentials FastTrack a student told his story of how he endend up in our course.  His story we have heard for other technologies like Cisco, VMware, BlueCoat and other products.

A large percentage of training is moving to the virtualized/remote lab environments.  Students are asked to use some variant of remote access software and remote into the training company's lab environment. Our student in our Palo Alto Networks Firewall course informed us that he went to a very costly offering of that course from the vendor and was not able to perform any labs.  There were either network connectivity issues, or issues with the remote access software, or other problems.  The whole training experience was very frustrating and not productive.

We keep our labs open to students if they would like after hours, or before hours access.  Repeatedly going through a lab engrains that knowledge for later recall.  Touching hardware is so critical in understanding the problems that arise when a cable comes loose, or a cable gets plugged in the wrong port.  There are other scenarios such as just pulling the power cable, or turning off a power strip, or accidently overwriting a configuration.  These disaster scenarious requires hands-on physical access to hardware.  Preventing and recovering from disasters is what it's all about, and that requires hands-on, instructor led, real hardware.