N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
02/10/2025 - 02/14/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
05/19/2025 - 05/23/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
08/11/2025 - 08/15/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
11/17/2025 - 11/21/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.

User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments

Liked the class? Then let everyone know!

N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

N-325: Implementing Cisco IOS Network Security (IINS)

Course Overview:

Implementing Cisco IOS Network Security (IINS) is an instructor-led course. This five-day course focuses on the necessity of a comprehensive security policy and how it affects the posture of the network. TechNow students each get a Cisco Switch, Router, and an ASA. The in the classrom hardware hands-on component of this course is a priority. Using instructor-led discussions, extensive hands-on lab exercises, and supplemental materials, this course allows learners to understand common security concepts, and deploy basic security techniques utilizing a variety of popular security appliances within a “real-life” network infrastructure. TechNow is an Authorized VUE testing partner and this course concludes with the student taking the 210-260 IINS Cisco Certification Exam.

Duration: 5 days

Audience: Cisco Network Administrators. This course is an excellent precursor to Palo Alto Network Firewall Training

DoD 8140: Not Mandated

Course Prerequisites: CCNA

Course Objectives:

Describe common network security concepts
Secure routing and switching infrastructure
Deploy basic authentication, authorization and accounting services
Deploy basic firewalling services
Deploy basic site-to-site and remote access VPN services
Describe the use of more advanced security services such as intrusion protection, content security and identity management

Attendees to N-325: Implementing Cisco IOS Network Security will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-765: Automating Administration with Windows Powershell

Course Overview:

This course provides students with the fundamental knowledge and skills to use PowerShell for administering and automating administration of Windows servers. This course provides students the skills to identify and build the command they require to perform a specific task. In addition, students learn how to build scripts to accomplish advanced tasks such as automating repetitive tasks and generating reports. This course provides prerequisite skills supporting a broad range of Microsoft products, including Windows Server, Windows Client, Microsoft Azure, and Microsoft 365. In keeping with that goal, this course will not focus on any one of those products, although Windows Server, which is the common platform for all of those products, will serve as the example for the techniques this course teaches.

Attendees to TN-765: Automating Administration with Windows Powershell will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Describe the functionality of Windows PowerShell and use it to run and find basic commands
Identify and run cmdlets for server administration
Work with Windows PowerShell pipeline
Describe the techniques Windows PowerShell pipeline uses
Use PSProviders and PSDrives to work with other forms of storage
Query system information by using WMI and CIM
Work with variables, arrays, and hash tables
Write basic scripts in Windows PowerShell
Write advanced scripts in Windows PowerShell
Administer remote computers
Use background jobs and scheduled jobs
Use advanced Windows PowerShell techniques

Course Prerequisites:

Experience with Windows networking technologies and implementation.
Experience with Windows Server administration, maintenance, and troubleshooting.

Comments

Latest comments from students

Liked the class? Then let everyone know!

L-395: Accelerated Linux Administration and Utilities

Course Overview:

This course is extremely fast paced and for students that have already had UNIX or Linux training, or have not worked with Linux in several months or years. This is NOT a course for students new to Linux and assumes the student requires a refresher before progressing through high end security courses that require dexterity on Linux. RedHat and Ubuntu, VMware Virtual Machines, and BackTrack are used for the instruction of this course. The student will acquire the skills to easily navigate the advanced VMware training environment and will be able to create scripts to manipulate and manage Linux. The ulimate goals of the skills of this course is to provide the student the ability to automate through scripting BackTrack tools for offensive security, forensics, and defense.

Attendees to L-395: Accelerated Linux Administration and Utilities will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Day 1 and 2: Unix Review and Unix Utilities

Linux File System Archictecure and In-Depth discussion of Hard and Soft Links
Linux File, Directory, and Permissions Management
Linux archives using tar and zip
Interacting with BASH
Review of Common Linux commands
Sorting files by line or field
Regular Expressions (meta character) with grep commands to locate specific lines in files
Grep, egrep extended metacharacters, combinations-lab advanced combinations- lab Sed
Basic commands- Lab, Advanced commands- Lab, Advanced scripting -Lab
Miscellaneous commands Tr, sort, cut, past, pr -Lab
Performing non-interactive editing tasks with the sed command
Writing simple sed scripts to perform complex editing tasks
Using awk variables & arrays to sort data
Employing awk programs to manipulate numeric & textual data
Performing formatted printing in awk
Writing simple awk programs to write reports from data files
Using built-in awk functions & defining new functions
Write awk programs that make decisions based on numeric or string comparisons (branches & loops)

Day 3 – Intro to Programming / Shell Scripting

Shell Review
Shell Interpretation of Quotes & Backslash
The Bash Shell
Shell's combined with UNIX utilities
Programming Basics
Data Constructs
Programming Looping
Your Environment
More on Parameters

Day 4 and 5 – Security Fundamentals, Linux Administration

System Configuration / Kernel overview
System Maintenance / Disk and file admin
Using utilities for process control, locating files & automating maintenance tasks
System Startup / Boot Process – LILO & GRUB Configuration
Managing the Linux file system
Customization of setup files
Run Levels
Network Services / Configuration
User Management Monitoring, accessing & restricting root system access
Administration Tools
Process Control
Client side components of NFS, Samba, NTP, NIS
Server side components such as DHCP, Samba, NIS, LDAP, inet, telnet, ftp, DNS, etc.

Prerequisites:

Prior UNIX/Linux experience or training

Comments

Latest comments from students

User: mikenaya

Instructor comments: As usual, Dave was excellent and the content was very relevant to our line of work.

Facilities comments: The hotel facilities met our basic needs but it was awkward having a bathroom so close. I can't wait for the new facility to open.

User: fquinene

Instructor comments: Instructor was super knowledgeable and helped me tie in a lot of information from other OS and processes.

Facilities comments: Facility was fine