PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-855: Advanced and In-Depth ICD 503 RMF, Controls, and Assessments

Course Overview:

This course is very hands-on with respect to SP 800-53 controls as related to ICD-503, leveraging experience with DCD 6/3, and incorporating a broad array of technologies found in the field. Assessors and Auditors have to face many technologies that are not part of the main stream. TechNow has gone to great efforts to build a very broad, comprehensive, and complex lab to simulate many scenarios and architectures. Technologies such as a network appliance that is not a typical infrastructure product, a radio/satellite communications device, or many other technologies that build up a weapon system. Students learn how controls are integrated into many different devices and how they fit in the overall security architecture of monitoring, reporting, and compliance testing.

Directly discussed are overlays for different requirements i.e.: tactical, medical, network type: JWICS, SIPR; IC or AF. TechNow has developed a funnel concept to overlays to exemplify the encapsulation of a control within different requirements. TechNow has over 15 years experience in Trusted Solaris/Trusted Extensions and labeled security. Cross Domain overlays are presented that fits the work flow of an assesor. PII overlays and any overlays that an organization uses and can be made available are also presented.

This course allows the student to leverage years of experience in DoD DCD 6/34 for transition to the Risk Management Framework (RMF) applied to the Intelligence Community as mandated by ICD 503. Utilizing NIST SP 800-37 to establish a baseline of RMF knowledge, the student learns how to integrate the NIST pubs to provide cohesive information assurance architectures and compliance. ICD 503 scorecard evaluations are integral in demonstrating a successful ICD 503 compliance program. TechNow's ICD 503 course provides students with the skill to assess security programs and evaluate ICD 503 compliance to build an improvement and sustainable program for score consistency. TechNow's instructors have unparralleled expertise in federal compliance initiatives, and we bring this expertise instructing students on the complete life cycle of RMF.

More than a simple checklist, we instruct students not only how to validate essential security controls, programs, and metrics, but that they are operating effectively. The student leaves the course knowing how to: identify gaps where controls, programs, or metrics are incomplete, missing or ineffective, and provide actionable findings and recommend remediation strategies. Students learn to internalize NIST pubs to meaningul and effective IA guidelines and work with the Body of Evidence templates which include: Risk Assessment Report (RAR), Systems Security Plan (SSP), Security Assessment Report (SAR), and Plans of Action and Milestone (POAM).

TechNow training materials are aligned with the most recent set of National Institute of Standards and Technology (NIST), Committee on National Security Systems (CNSS), and Office of the Director of National Intelligence (ODNI) policies standards, processes, policies and instructions to be addressed/explained include ICD 503, ICS 503-1, ICS 500-16, ICS 500-18, ICS 500-27, ICD 502, NIST SP 800-37, NIST SP 800-30, NIST SP 800-53, NIST SP 800-53A, NIST SP 800-137, NIST SP 800-47, CNSSP 22, CNSSI 1253, and CNSSI 4009.

A majority of time is spent on in-depth compliance review of NIST SP 800-53 controls. Instruction discusses which method should be used to test and validate each security control and what evidence should be gathered. This course is not theory or death by power point. Real scenarios are presented as exercises. A complete live cyber range simulating the IC is utilized for hands-on labs for techniques of validating and documenting compliance of NIST SP 800-53 controls as related to ICD 503.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Establish a baseline of RMF knowledge
Validate essential security controls, programs, and metrics
DoD DCD 6/3 to ICD 503 Transition
Lab Environtment and the Cyber Range
Overlays: Tactical, Medical, Network type(JWICS, SIPR; IC or AF), Cross Domain, PII
Risk Assessment Report (RAR)
Systems Security Plan (SSP)
Security Assessment Report (SAR)
Plans of Action and Milestone (POAM)

Prerequisites:

Experience in the field of auditing and assesments.

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-595: VoIP Security Analysis and Design

Course Overview:

As VoIP (Voice-over IP) is integrated into the operations of many missions, it is imperative to understand its security ramifications. In the N-595: VoIP Security Analysis and Design class the objectives are designed for those who are chartered with the responsibility of securing networks and application environments that incorporate VoIP. Topics include how VoIP works, its interactions with the network, its vulnerabilities and mitigations. Focus is on leading open source and proprietary technologies utilizing Asterisk and Cisco and the protocols SIP, H.323, RTP, MGCP, and Skinny. Other protocols such as Nortel's UNIStim will be addressed. As for Cisco, security pieces in the VoIP CallManager servers, Catalyst switches, IOS-based routers, and ASA firewalls, amounts to several different platforms, each with its own management interface and lockdown procedures. Various open source tools including those in BackTrack are used for VoIP attacks. A task list of actions for securing enterprise VoIP is carried out in hands-on labs, performed on Cisco phones, routers, switches, and ASA firewalls.

Attendees to N-595: VoIP Security Analysis and Design will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

VoIP Architecture
VoIP Signaling and media protocols
Common VoIP authentication mechanisms
Common VoIP encryption techniques
VoIP protocol analysis with Wireshark
Maintaining QoS while mitigating DoS
VoXML, XML, and application integration security
Converged network security design and implementation
Impact of NAT and firewalls
SIP, H.323, and MGCP vulnerabilities
VPN, IPsec and SRTP to secure VoIP services
Penetration testing with open source tools
Attacks for Eavesdropping, call redirection, and DoS
Design of hacked firmware virtualization layer
Concise lockdown steps for network hardware and VoIP

Prerequisites:

This is an advanced Information Security Course which requires basic Windows & UNIX competency
Certification or 2 years of experience in these operating systems is highly recommended
As well as an understanding of TCP/IP

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

TN-555: Certified Ethical Hacker v12 (CEH)

Course Overview:

This CEH course will immerse you into a “Hacker Mindset” in order to teach you how to think like a hacker and better defend against future attacks. Students are in the driver’s seat with a hands-on training environment employing a systematic ethical hacking process. All while teaching students how to scan, test, hack, and secure target systems. CEH shows how hackers think and act maliciously so you can learn to better position your organization’s security infrastructure and defend against future attacks.

This CEH course covers the Five Phases of Ethical Hacking, diving into Reconnaissance, Gaining Access, Enumeration, Maintaining Access, and covering your tracks.

This CEH course delivers in-demand ethical hacking skills while preparing you for the internationally-recognized Certified Ethical Hacker (CEH) certification exam (312-50) from EC-Council.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

What’s Included:

EC-Council official E-Courseware
EC-Council official iLabs code with access for 6 months
EC-Council official Certificate of Attendance
CEH Exam Voucher

Security Course Flow

Dates/Locations:

Date/Time	Event
12/02/2024 - 12/06/2024 08:00 -16:00	TN-555: Certified Ethical Hacker v12 (CEH) TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Content:

Module 01. Introduction to Ethical Hacking
Module 02. Foot-printing and Reconnaissance
Module 03. Scanning Networks
Module 04. Enumeration
Module 05. Vulnerable Analysis
Module 06. System Hacking
Module 07. Malware Threats
Module 08. Sniffing
Module 09. Social Engineering
Module 10. Denial-of-Service
Module 11. Session Hijacking
Module 12. Evading IDS,Firewalls, and Honeypots
Module 13. Hacking Web Servers
Module 14. Hacking Web Applications
Module 15. SQL Injection
Module 16. Hacking Wireless Networks
Module 17. Hacking Mobile Platforms
Module 18. IoT and OT Hacking
Module 19. Cloud Computing
Module 20. Cryptography

Prerequisites:

Windows operating system and/or Linux operating system or other Unix-based OS
TCP/IP protocols and implementation
At least 2 years of IT security experience
TN-325:Security+

Target Audience:

Information Security Analyst/Administrator, Information Assurance (IA) Security Officer, Information Security Manager/Specialist, Auditors, Security Professional, Site Admins, Penetration Testers, Red Team,Risk/Threat/Vulnerability Analyst, Individuals concerned about the integrity of network infrastructure

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students