PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-969: Windows Security Administrator Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.  This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs to secure Windows systems. Lecture and labs start with quick review of Active Directory and group policy to enforce security mechanisms within the Windows architecture.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations.  PowerShell is made for SecOps/DevOps automation and students will learn to write PowerShell scripts to automate security operations and Desired State Configuration (DSC).  The course concludes with exercising real attack strategies to demonstrate the effectives of properly securing your host.

Attendees to TN-969: Windows Security Administrator course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Active Directory and BloodHound
  • Security Controls
  • PKI
  • Encryption
  • Wireless & Network Security and Hardening DNS
  • 802.1x and Endpoint Protection
  • Firewalls and VPN
  • PowerShell Scripting
  • JEA, DSC, Enterprise Security with PowerShell
  • Windows Attack Strategies

Prerequisites:

  • Security+
  • Windows System Administration Skills

 

Comments

Latest comments from students

User: bbrabender

Instructor comments: Instructor was very knowledgeable and help more inexperienced users with concepts as well explaining in a way that can be understood.

Facilities comments: N/A

User: dale.r.anderson

Instructor comments: Instructor was well knowlegeable accross alot of domains.

Facilities comments: Pretty good

Liked the class?  Then let everyone know!

TN-385: TCP/IP Analysis & Implementation

Course Overview:

This course, TN-385: TCP/IP Analysis & Implementation, provides students with a comprehensive technical introduction to TCP/IP & the interworkings of TCP/IP application to UNIX, Linux and Windows in a network environment.  This course begins by providing a comprehensive protocol stack analysis.  It continues with extensive hands-on exercises needed to configure TCP/IP on UNIX and Windows based networks.

Attendees to TN-385: TCP/IP Analysis & Implementation will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • A thorough comprehension of each level of the protocol stack
  • Configuring UNIX & Windows to access internetworks
  • Configuring & setting up a Cisco router
  • Properly implementing subnets to avoid ongoing maintenance headaches
  • Routing & routing protocols, RIP, OSPF, and IGRP
  • How to troubleshoot a wide range of routing problems
  • All major TCP/IP application services including: FTP, TELNET, SNMP, NFS, DNS, DHCP, & WINS
  • How to avoid common internetworking problems
  • How to troubleshoot TCP/IP networks using protocol analysis techniques – snoop on Sun Workstation & Network Monitor on Windows.
  • How to design, build, configure, & manage TCP/IP internetworks
  • Applying a structured methodology for troubleshooting TCP/IP internetworks
  • ACL's on Cisco routers

Prerequisites:

  • Students should have good end-user skills in TCP/IP (FTP, TELNET, RLOGON,  & MAIL).

Comments

Latest comments from students

Liked the class?  Then let everyone know!

Cisco

Are you looking for a Cisco Training Course?

Your organization needs qualified professionals who can design, implement, and operate Cisco multiprotocol internet works.  With Cisco training from TechNow, you can gain the knowledge and experience your organization needs to succeed.

TechNow’s Cisco Training and Certification Career Path takes students from the fundamentals of networking through a complete line of Cisco courses designed to give students the knowledge and experience they need to master Cisco networking skills in a fast, thorough, and efficient manner.

Our Cisco training courses will prepare you for your work towards Cisco certification.  With years of experience in the Cisco training environment, TechNow can lead you through a dynamic experience to prepare you for Cisco certification.

A list of our Cisco Courses.

in   

VM-335: VMware Cloud Essentials and vCloud – Architecting the VMware Cloud FastTrack

 

Course Overview:

This FastTrack course combines combines two VMware courses (VMware Cloud Essentials and vCloud Architecting the VMware Cloud) into a single week course that adds extra exercises and labs to exemplify the techniques presented.  The course begins with how to adopt, operate, and govern the cloud. The course enables participants to successfully complete the associated CompTIA Cloud Essentials™ Exam to become a Cloud Essentials™ Professional(CEP). This course also covers the subject matter specified by the VCP-Cloud certification.

This course is designed to guide students through the decision points and policy choices available for designing and implementing a VMware vCloud environment. Detailed labs and exercises for VMware vSphere™, VMware vCloud Director, VMware vCenter™ Chargeback, and the VMware® vShield Edge capability that is included with vCloud Director. A comprehensive VMware cloud design is demonstrated and discussed.

Attendees to VM-335:  VMware Cloud Essentials and vCloud – Architecting the VMware Cloud FastTrack will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Understand the common terms and definitions of cloud computing.
  • Understand the business benefits and business considerations of cloud computing.
  • Understand cloud computing from a technical perspective and recognize the various techniques, methods, challenges, and types of clouds.
  • Understand the impact and changes of cloud computing on IT service management.
  • Explain typical steps that lead to the successful adoption of cloud computing and understand the implications for organizations.
  • Recognize the compliance, risk, and regulatory consequences of cloud computing and its financial and strategic impact on an organization.
  • Evaluate and design a multitenant environment to address both private cloud and public cloud customer needs.
  • Configure vCloud providers that can accommodate heterogeneous server, storage, and network resources
  • Design a network infrastructure optimized for vCloud.
  • Integrate vCloud Director security with existing LDAP systems and design appropriate security hierarchies with security rolesnderstand the common terms and definitions of cloud computing.
  • Understand the business benefits and business considerations of cloud computing.
  • Understand cloud computing from a technical perspective and recognize the various techniques, methods, challenges, and types of clouds.
  • Understand the impact and changes of cloud computing on IT service management.
  • Explain typical steps that lead to the successful adoption of cloud computing and understand the implications for organizations.
  • Recognize the compliance, risk, and regulatory consequences of cloud computing and its financial and strategic impact on an organization.
  • Evaluate and design a multitenant environment to address both private cloud and public cloud customer needs.
  • Configure vCloud providers that can accommodate heterogeneous server, storage, and network resources.
  • Design a network infrastructure optimized for vCloud.
  • Integrate vCloud Director security with existing LDAP systems and design appropriate security hierarchies with security roles.
  • Design a vCenter Chargeback implementation.

Course Prerequisites:

  • VM-315  or equivalent experience.
  • Managing or administering at least one of UNIX, Windows, databases, networking, or security.

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!