PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

N-315: Cisco Secure Virtual Private Networks

Course Overview:

This course is designed for students who intend to work with virtual private networks (VPNs) using IPSec. The course includes detailed coverage of the VPN 3000 Concentrator, a scalable remote access platform that offers encryption, high availability, and superior performance. This class is an invaluable theory and configuration guide for the VPN 3000 series of products, with its thorough coverage of concentrators, hardware clients, and software clients.

Attendees to N-315: Cisco Secure Virtual Private Networks will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Network Security & Virtual Private Network Technologies Cisco VPN 3000 Concentrator Series Hardware Overview
Routing on the VPN 3000
Configuring the Cisco VPN 3000 for Remote Access Using Pre-shared Keys
Configuring the Cisco VPN 3000 for Remote Access Using Digital Certificates
The Cisco VPN Client Firewall Feature
Configuring the Cisco 3002 Hardware Client for Remote Access
Configuring the Cisco 3002 Hardware Client for User & Unit Authentication
Configuring Cisco VPN Clients for Backup Server, Load Balancing & Reverse Route Injection
Configuring the Cisco 3000 Concentrator for IPSec over TCP & UDP
Configuring LAN-to-LAN VPNs on the Cisco 3000
Network Monitoring & Administration Troubleshooting

Prerequisites:

Students who attend this advanced course must have experience in configuring Cisco IOS software
CCNA certification
Basic knowledge of the Windows operations system
Familiarity with the networking & security terms & concepts

Comments

Latest comments from students

Liked the class? Then let everyone know!

Test2

http://technow.www162-254-253-232.a2hosted.com/palo-alto-firewall-essentials-fasttrack-training-class-course-pa-215/

Course Overview:

PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-222: Palo Alto Networks Panorama Essentials.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications.

Attendees to the PA-215: Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:

Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1 Module 0 – Introduction & Overview Module 1 – Administration & Management Configuration Management PAN-OS & Software Updates Service Route Configuration Log Forwarding GUI, CLI, and API Module 2 – Interface Configuration L2 & L3 Vwire Tap Interface Management in Security Zones VLANs QoS	Day 2 Module 3 – Layer 3 Configuration L3 Configuration and DHCP NAT DNS Proxy Policy Based Forwarding in Introduction to IPv6 Module 4 – App-ID App-ID Process Policy Administration Module 5 – Content-ID Antivirus Anti-spyware Vulnerability URL Filtering File Blocking and Wildfire Data Filtering DoS Protection Botnet
Day 3 Module 6 – VM Firewall Downlaod VM Template Configure ESXi Configure VM Module 7 – Decryption SSL Inbound and Outbound Module 8 – Custom Signatures Defining New Application Signatures Application Override Custom Threat ID	Day 4 Module 9 – User-ID User-ID Agent Terminal Server Agent XML API Captive Portal Module 10 – VPN and GlobalProtect Psec Tunnels GlobalProtect Agent Portal Gateway HIP
Day 5 Module 11 – High Availability Active/Passive Active/Active Module 12 – Panorama Device Groups & Objects Shared Policy Configuration Management Reporting

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

N-515: Implementing Cisco Enterprise Wireless Networks (ENWLSI)

Course Overview:

The Implementing Cisco Enterprise Wireless Networks (ENWLSI) course gives you the knowledge and skills needed to create a secure wireless network infrastructure and troubleshoot any related issues. You’ll learn how to implement and fortify a wireless network infrastructure using Cisco Identity Service Engine (ISE), Cisco Prime Infrastructure (PI), and Cisco Connect Mobile Experience to monitor and troubleshoot network issues.

Attendees to N-515: Implementing Cisco Enterprise Wireless Network (ENWLSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-430 Implementing Cisco Enterprise Wireless Networks (ENWLSI) exam, which is part of the CCNP® Enterprise certification and the Cisco Certified Specialist – Enterprise Wireless Implementation certification.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Implement network settings to provide a secure wireless network infrastructure
Implement a secure wireless client and troubleshoot wireless client connectivity issues
Implement and troubleshoot QoS in wireless networks
Implement and troubleshoot advanced capabilities in wireless network services

Prerequisites:

CCNA certification
N-415: Implementing and Operating Cisco Enterprise Network Core Technologies
General understanding of networks and wireless networks
Routing and switching knowledge

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-555: Certified Ethical Hacker v12 (CEH)

Course Overview:

This CEH course will immerse you into a “Hacker Mindset” in order to teach you how to think like a hacker and better defend against future attacks. Students are in the driver’s seat with a hands-on training environment employing a systematic ethical hacking process. All while teaching students how to scan, test, hack, and secure target systems. CEH shows how hackers think and act maliciously so you can learn to better position your organization’s security infrastructure and defend against future attacks.

This CEH course covers the Five Phases of Ethical Hacking, diving into Reconnaissance, Gaining Access, Enumeration, Maintaining Access, and covering your tracks.

This CEH course delivers in-demand ethical hacking skills while preparing you for the internationally-recognized Certified Ethical Hacker (CEH) certification exam (312-50) from EC-Council.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

What’s Included:

EC-Council official E-Courseware
EC-Council official iLabs code with access for 6 months
EC-Council official Certificate of Attendance
CEH Exam Voucher

Security Course Flow

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

Module 01. Introduction to Ethical Hacking
Module 02. Foot-printing and Reconnaissance
Module 03. Scanning Networks
Module 04. Enumeration
Module 05. Vulnerable Analysis
Module 06. System Hacking
Module 07. Malware Threats
Module 08. Sniffing
Module 09. Social Engineering
Module 10. Denial-of-Service
Module 11. Session Hijacking
Module 12. Evading IDS,Firewalls, and Honeypots
Module 13. Hacking Web Servers
Module 14. Hacking Web Applications
Module 15. SQL Injection
Module 16. Hacking Wireless Networks
Module 17. Hacking Mobile Platforms
Module 18. IoT and OT Hacking
Module 19. Cloud Computing
Module 20. Cryptography

Prerequisites:

Windows operating system and/or Linux operating system or other Unix-based OS
TCP/IP protocols and implementation
At least 2 years of IT security experience
TN-325:Security+

Target Audience:

Information Security Analyst/Administrator, Information Assurance (IA) Security Officer, Information Security Manager/Specialist, Auditors, Security Professional, Site Admins, Penetration Testers, Red Team,Risk/Threat/Vulnerability Analyst, Individuals concerned about the integrity of network infrastructure

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students