PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations:

No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

CL-115: Red Hat OpenStack Administration I: Core Operations for Cloud Operators

 

Course Overview:

The focus of Red Hat OpenStack Administration I: Core Operations for Cloud Operators (CL110) will be managing OpenStack using both the web-based dashboard and the command-line interface, in addition to managing instances and installing a proof-of-concept environment using Red Hat OpenStack Platform (RHOSP) director. Essential skills covered in the course include configuring Red Hat OpenStack Platform (using the director UI); managing users, projects, flavors, roles, images, networking, and block storage; setting quotas; and configuring images at instantiation.

Attendees to CL-115 Red Hat OpenStack Administration I: Core Operations for Cloud Operators will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Prerequisites:

This course is designed for Linux system administrators, cloud administrators, and cloud operators interested in, or responsible for, maintaining a private or hybrid cloud.

Prerequisites for this course is Red Hat Certified System Administrator (RHCSA) or demonstrate equivalent experience

Course Outline:

  • Launch an instance
  • Manage projects, quotas, and users
  • Manage networks, subnets, routers, and floating IP adresses
  • Create and manage block and object storage in the OpenStack framework
  • Customize instances with cloud-init
  • Deploy scalable stacks
  • Deploy RedHat OpenStack Platform using RHOSP director

 

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

TN-905: Cyber Threat Intelligence Analysis

 

Course Overview:

TechNow has worked worldwide enterprise infrastructures for over 30 years and has developed demos and labs to exemplify the techniques required to demonstrate technologies that effectively support CTI.  This course integrates well with our courses TN-575: Open Source Network Security Monitoring and TN-865: Wireshark Network Traffic and Security Analysis .

TechNow develops Cyber Ranges and makes them available for conferences in support of annual meetings for Cyber Threat Response Teams.  Developing scenarios and reacting to them appropriately is a big part of the value in understanding the contexts required to comprehend valuable CTI.   As with many advanced TechNow security courses, there is a large hands-on ratio.  This course helps Cyber Protection Teams (CPT), Defensive Cyber Operations (DCO), and Mission Defense Teams (MDT) to collect, analyze and apply targeted cyber intelligence to defensive operations in order to proactively act on and tune response to attacks by cyber adversaries.  CPT, DCO, and MDT can take preemptive action by utilizing CTI, understanding CTI tools, techniques and procedures (TTPs) needed to generate and consume timely and relevant intelligence to improve resilience and prevention.

This course focuses on the collection, classification, and exploitation of knowledge about adversaries and their TTPs. .  MDT puts us close the mission and helps define the internal context to be analyzed against the CTI.  TechNow pushes the student to truly understand how to think about and use CTI to make a difference.

Attendees to TN-905: Cyber Threat Intelligence Analysis will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Learn to comprehend and develop complex scenarios
  • Identify and create intelligence requirements through practices such as threat modeling
  • Utilize threat modeling to drive intelligence handling and practices 
  • Breakdown tactical, operational, and strategic-level threat intelligence
  • Generate threat intelligence to detect, respond to, and defeat focused and targeted threats
  • How to collect adversary information creating better value CTI
  • How to filter and qualify external sources, mitigating low integrity intelligence
  • Create Indicators of Compromise (IOCs) in formats such as YARA, OpenIOC, and STIX
  • Move security maturity past IOCs into understanding and countering the behavioral tradecraft of threats
  • Breaking down threats mapped against their tradecraft to tweak IOCs
  • Establish structured analytical techniques to be successful in any security role
  • Learn and apply structured principles in support of CTI and how to communicate that to any security role.

Course Prerequisites:

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class?  Then let everyone know!

CL-355: Containers, Kubernetes, and Red Hat OpenShift Administration

 

Course Overview:

Through an introduction to Docker, Kubernetes, and Red Hat OpenShift Platform, this training course helps you understand one of the key tenets of the DevOps and DevSecOps Platform (DSOP) movement: continuous integration and continuous deployment. The CI/CD pipeline becomes well understood and implemented in an open architecture.  Containers have become a key technology for the configuration and deployment of applications and micro services. Kubernetes is a container orchestration platform that provides foundational services in Red Hat OpenShift Container Platform, which allows enterprises to manage container deployments and scale their applications using Kubernetes.

This training course provides an overview of the DoD Enterprise DevSecOps Platform (DSOP) Reference Design, its current state, and ties to DoD Cloud Platform One (P1). Workflows of the DoD Iron Bank container repository are introduced, along with an overview of the DoD Pipeline as represented in Big Bang.  Continuous authorization cATO via Party Bus within NIST RMF is presented. You will become aware of the Platform One (P1) integrations and relationship to Docker, Kubernetes, Istio (Red Hat OpenShift Service Mesh) and Red Hat OpenShift Platform.

In addition to gaining an understanding of these tools, you will build core administration skills through the installation, configuration, and management of an OpenShift cluster and containerized applications.

Course Objectives:

  • Learn about Containers, Docker, Kubernetes, and OpenShift architecture
  • Overview DoD Enterprise DevSecOps Platform (DSOP) Reference Design and DoD Cloud Platform One (P1)
  • Tie together awareness of various DoD Cloud offerings and their relationships
  • Create containerized services
  • Manage containers and container images
  • Deploy multi-container applications
  • Install an OpenShift cluster
  • Configure and manage masters and nodes
  • Secure OpenShift
  • Control access to resources on OpenShift
  • Monitor and collect metrics on OpenShift
  • Deploy applications on OpenShift using source-to-image (S2I)
  • Manage storage on OpenShift

Course Outline:

  • Getting started with container technology
  • Creating containerized services
  • Managing containers
  • Managing container images
  • Creating custom container images
  • Deploying containerized applications on OpenShift
  • Deploying multi-container applications
  • Troubleshooting containerized applications
  • Comprehensive Review of Introduction to Container, Kubernetes, and RedHat OpenShift
  • Introducing Red Hat OpenShift Container Platform
  • Installing OpenShift Container Platform
  • Describing and exploring OpenShift networking concepts
  • Executing commands
  • Controlling access to OpenShift resources
  • Allocating persistent storage
  • Managing application deployments
  • Installing and configuring the metrics subsystem
  • Managing and monitoring OpenShift Container Platform

Dates/Locations:

No Events

Duration: 5 Days

Prerequisites:

  • Ability to use a Linux® terminal session and issue operating system commands
  • Good foundation in Linux
  • Experience with web application architectures and their corresponding technologies

Target Audience:

  • Developers who wish to containerize software applications
  • Administrators who are new to container technology and container orchestration
  • Architects who are considering using container technologies in software architectures
  • System administrators
  • System architects
  • Architects and developers who want to install and configure OpenShift Container Platform
  • Those working in the field of DevSecOps supporting DoD Platform One (P1) and other implementations

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!