Course Overview: PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course combines PA-213 and PA-212 and adds a half day introduction to Panorama and Troubleshooting.  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-232: Palo Alto Networks Panorama Manage Multiple Firewalls. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications. Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  Additionally Panorama and Troubleshooting are addressed.

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students



User: rod3535@gmail.com

Instructor comments: Instructor was great, he explained everything and made sure we understood the process's/product. He also took time out of his own schedule to help set up a VM environment on our personal pc's.

Facilities comments: Facility was great, enjoyed feeding the deers!


Like the class?  Then let everyone know!

DoD 8570 Training

The Department of Defense requires that all information assurance personnel must become compliant with IT and security certification standards.

DoD 8570 training, also called Information Assurance training, is available through TechNow to provide you with the certification that is required.  Your DoD 8570 training  ( information assurance training ) at TechNow will provide you with all of the courses necessary to receive your DoD 8570.01-M certification.

Ongoing open enrollment through TechNow is availble for our DoD 8570.01-M courses.

Please review the full & updated DoD approved IA baseline certifications aligned to each category & level of the IA workforce:

Note: The Certifications in red are recently added to approved list as of 2/4/19

For further information or to schedule for classes, call us at 800-324-2294

in   
 

Course Overview:

 TN-575: Open Source Network Security Monitoring and TN-865: Wireshark Network Traffic and Security Analysis .

 

TechNow’s TN-911: Cyber Threat Intelligence (CTI) Analysis Seminar, is a one day seminar that covers the objectives of TechNow’s TN-905: Cyber Threat Intelligence Analysis five day course in a one day seminar format.  Upon request, this seminar can be presented in multi-day format based upon the depth of knowledge required. The NIST PUB 800-172 security enhancement update to 800-171 regarding 03.11.1 Risk Assessment, introduces the security enhancements of a Threat Awareness Program, Threat Hunting, and Predictive Cyber Analytics.  TN-911 distills the TN-905 CTI five day course and aligns it to assessing compliance with 800-172.  For the seminar, selected course labs are converted to demos, and the important points and outcomes of topics are presented. The TN-911 CTI Seminar discusses the applicability of the 800-172 security enhancements to the organization being assessed, and how to think about the the appropriate strength of the controls related to the organizations criticality of the information and the risk involved for contracted work with the DoD.

TechNow’s TN-911: Cyber Threat Intelligence Analysis Seminar addresses significant changes that have been made to SP 800-172 in transitioning to Revision 3, regarding new enhanced security requirements based on (1) the latest threat intelligence and (2) empirical data from cyber-attacks.  With the intent of addressing CUI that may be associated with a critical program or a high value asset.

Those programs and assets are potential targets for advanced persistent threat (APT).  Cyber Threat Intelligence supports the required functions of NIST 800-172 of Penetration Resistant Architecture (PRA), Damage Limiting Operations (DLO) and Cyber Resiliency (CRS).

TechNow’s TN-911 addresses 800-172, 3.11 Risk Assessment, 03.11.01E Threat Awareness Program and 03.11.02E Threat Hunting, 03.11.03E Predictive Cyber Analytics.

TN-911 CTI Seminar directly discusses 3.11 topics:

    03.11.01E Threat Awareness Program:

    Share threat information, including threat events of 03.11.01E is specifically covered as:

  • Create Indicators of Compromise (IOCs) using STIX
  • Understand a solution for collecting, storing, distributing and sharing cyber security indicators and threats about cyber security incidents analysis and malware analysis.
  • How to assess an environment to validate:
    • Support for day-to-day operations to share structured threat information efficiently.
    • Confirming the presence of curated, frequently updated feeds, and the automation of enrichment   workflow
    • Contextualization of intelligence with internal data to prioritize alerts and improve detection
    • Updated threat hunting based upon inbound Threat Intelligence

    03.11.02E Threat Hunting:

    Introduction to Threat Hunting practices to effectively search for indicators of compromise and to detect, track, and disrupt threats that evade existing controls.

  • How to assess an environment to validate:
  • A formalized process is being followed for Threat Hunting
    • Phases of trigger (incident or CTI), SIEM utilization, and response
  • Integration of machine learning to provide proactive, automated, and scalable Threat Hunting
  • Leveraging threat intelligence for proactive threat hunting by querying historical logs for indicators of compromise (IOCs) from feeds to identify:
  •  Dormant threats
  •  Advance Persistent Threats (APT)

    03.11.03E Predictive Cyber Analytics

    Introduction leveraging data, machine learning, and real-time analysis with automation to anticipate threats before they occur.

  • How to assess an environment to validate:
    • Data aggregation from network logs, user activities, system logs, and external threat intelligence feeds into a centralized platform like a SIEM
  • Use of machine learning algorithms to identify patterns, uncover correlations, and spot anomalies in real-time
  • Integration with incident response workflows
  • Staff skill competency level and integration into Predictive Cyber Analytics to mitigate advanced adversarial techniques against machine learning such as:
    • Attacks of Evasion, Poisoning, and Model Tampering
    • Utilization of exercises or Red Teaming to validate practices and effectiveness of Predictive Cyber Analytics.

Attendees to TN-905: Cyber Threat Intelligence Analysis will receive TechNow approved course materials and expert instruction.

Seminar Duration: 1 day (more upon request)

Seminar Objectives:

  • Learn to comprehend and develop complex scenarios
  • Identify and create intelligence requirements through practices such as threat modeling
  • Utilize threat modeling to drive intelligence handling and practices 
  • Breakdown tactical, operational, and strategic-level threat intelligence
  • Generate threat intelligence to detect, respond to, and defeat focused and targeted threats
  • How to collect adversary information creating better value CTI
  • How to filter and qualify external sources, mitigating low integrity intelligence
  • Create Indicators of Compromise (IOCs) in formats such as YARA, OpenIOC, and STIX
  • Move security maturity past IOCs into understanding and countering the behavioral tradecraft of threats
  • Breaking down threats mapped against their tradecraft to tweak IOCs
  • Establish structured analytical techniques to be successful in any security role
  • Learn and apply structured principles in support of CTI and how to communicate that to any security role.

Seminar Prerequisites:

Comments

 

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom.  Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

 Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time Event
11/17/2025 - 11/21/2025
08:00 -16:00
N-305: CCNA Bootcamp
TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

    • Identify the components of a computer network and describe their basic characteristics
    • Understand the model of host-to-host communication
    • Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
    • Describe LANs and the role of switches within LANs
    • Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
    • Install a switch and perform the initial configuration
    • Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
    • Describe the TCP/IP Transport layer and Application layer
    • Explore functions of routing
    • Implement basic configuration on a Cisco router
    • Explain host-to-host communications across switches and routers
    • Identify and resolve common switched network issues and common problems associated with IPv4 addressing
    • Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
    • Describe the operation, benefits, and limitations of static routing
    • Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
    • Describe the application and configuration of inter-VLAN routing
    • Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
    • Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
    • Configure link aggregation using EtherChannel
    • Describe the purpose of Layer 3 redundancy protocols
    • Describe basic WAN and VPN concepts
    • Describe the operation of Access Control Lists (ACLs) and their applications in the network
    • Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
    • Describe basic Quality of Service (QoS) concept
    • Describe network and device architectures and introduce virtualization
    • Introduce the concept of network programmability and Software-Defined Networking (SDN)
    • Configure basic IOS system monitoring tools
    • Describe the management of Cisco devices
    • Describe the current security threat landscape
    • Describe threat defense technologies
    • Implement a basic security configuration of the device management plane
    • Implement basic steps to harden network devices

Lab Objectives:

      • Get started with Cisco Command-Line Interface (CLI)
      • Observe How a Switch Operates
      • Perform Basic Switch Configuration
      • Implement the Initial Switch Configuration
      • Inspect TCP/IP Applications
      • Configure an Interface on a Cisco Router
      • Configure and Verify Layer 2 Discovery Protocols
      • Implement an Initial Router Configuration
      • Configure Default Gateway
      • Explore Packet Forwarding
      • Troubleshoot switch Media and Port Issues
      • Troubleshoot Port Duplex Issues
      • Configure Basic IPv6 Connectivity
      • Configure and Verify IPv4 Static Routes
      • Configure Iv6 Static Routes
      • Implement IPv4 Static Routing
      • Implement IPv6 Static Routing
      • Configure VLAN and Trunk
      • Troubleshoot VLANs and Trunk
      • Configure a Router on a Stick
      • Implement Multiple VLANs and Basic Routing Between the VLANs
      • Configure and Verify Single-Area OSPF
      • Configure and Verify EtherChannel
      • Improve Redundant Switched Topologies with EtherChannel
      • Configure and Verify IPv4 ACLs
      • Implement Numbered and Named IPv4 ACLs
      • Configure a Provider-Assigned IPv4 Address
      • Configure Static NAT
      • Configure Dynamic NAT and Port Address Translation (PAT)
      • Implement PAT
      • Log into the WLC
      • Monitor the WLC
      • Configure a Dynamic (VLAN) Interface
      • Configure a DHCP Scope
      • Configure a WLAN
      • Define a Remote Access Dial-In User Service (RADIUS) Server
      • Explore Management Options
      • Explore the Cisco DNA Center
      • Configure and Verify NTP
      • Configure System Message Logging
      • Create the Cisco IOS Image Backup
      • Upgrade Cisco IOS Image
      • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
      • Secure Console and Remote Access
      • Enable and Limit Remote Access Connectivity
      • Secure Device Administrative Access
      • Configure and Verify Port Security
      • Implement Device Hardening

Prerequisites:

      • Familiarity in the following networking topics:
        • TCP/IP
        • IP Configuration
        • Peer-to-Peer Networking
        • Subnetting
        • Building a Routing Table
      • It is not required but highly recommended to have the following certifications:

Comments

Latest comments from students


User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.


User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments


Liked the class?  Then let everyone know!

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom.  Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

    • Identify the components of a computer network and describe their basic characteristics
    • Understand the model of host-to-host communication
    • Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
    • Describe LANs and the role of switches within LANs
    • Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
    • Install a switch and perform the initial configuration
    • Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
    • Describe the TCP/IP Transport layer and Application layer
    • Explore functions of routing
    • Implement basic configuration on a Cisco router
    • Explain host-to-host communications across switches and routers
    • Identify and resolve common switched network issues and common problems associated with IPv4 addressing
    • Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
    • Describe the operation, benefits, and limitations of static routing
    • Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
    • Describe the application and configuration of inter-VLAN routing
    • Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
    • Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
    • Configure link aggregation using EtherChannel
    • Describe the purpose of Layer 3 redundancy protocols
    • Describe basic WAN and VPN concepts
    • Describe the operation of Access Control Lists (ACLs) and their applications in the network
    • Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
    • Describe basic Quality of Service (QoS) concept
    • Describe network and device architectures and introduce virtualization
    • Introduce the concept of network programmability and Software-Defined Networking (SDN)
    • Configure basic IOS system monitoring tools
    • Describe the management of Cisco devices
    • Describe the current security threat landscape
    • Describe threat defense technologies
    • Implement a basic security configuration of the device management plane
    • Implement basic steps to harden network devices

Lab Objectives:

      • Get started with Cisco Command-Line Interface (CLI)
      • Observe How a Switch Operates
      • Perform Basic Switch Configuration
      • Implement the Initial Switch Configuration
      • Inspect TCP/IP Applications
      • Configure an Interface on a Cisco Router
      • Configure and Verify Layer 2 Discovery Protocols
      • Implement an Initial Router Configuration
      • Configure Default Gateway
      • Explore Packet Forwarding
      • Troubleshoot switch Media and Port Issues
      • Troubleshoot Port Duplex Issues
      • Configure Basic IPv6 Connectivity
      • Configure and Verify IPv4 Static Routes
      • Configure Iv6 Static Routes
      • Implement IPv4 Static Routing
      • Implement IPv6 Static Routing
      • Configure VLAN and Trunk
      • Troubleshoot VLANs and Trunk
      • Configure a Router on a Stick
      • Implement Multiple VLANs and Basic Routing Between the VLANs
      • Configure and Verify Single-Area OSPF
      • Configure and Verify EtherChannel
      • Improve Redundant Switched Topologies with EtherChannel
      • Configure and Verify IPv4 ACLs
      • Implement Numbered and Named IPv4 ACLs
      • Configure a Provider-Assigned IPv4 Address
      • Configure Static NAT
      • Configure Dynamic NAT and Port Address Translation (PAT)
      • Implement PAT
      • Log into the WLC
      • Monitor the WLC
      • Configure a Dynamic (VLAN) Interface
      • Configure a DHCP Scope
      • Configure a WLAN
      • Define a Remote Access Dial-In User Service (RADIUS) Server
      • Explore Management Options
      • Explore the Cisco DNA Center
      • Configure and Verify NTP
      • Configure System Message Logging
      • Create the Cisco IOS Image Backup
      • Upgrade Cisco IOS Image
      • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
      • Secure Console and Remote Access
      • Enable and Limit Remote Access Connectivity
      • Secure Device Administrative Access
      • Configure and Verify Port Security
      • Implement Device Hardening

Prerequisites:

      • Familiarity in the following networking topics:
        • TCP/IP
        • IP Configuration
        • Peer-to-Peer Networking
        • Subnetting
        • Building a Routing Table
      • It is not required but highly recommended to have the following certifications:

Comments

Latest comments from students


User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material


User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.


Liked the class?  Then let everyone know!