PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations:

No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

PL-115: Fundamentals of Computer Programming

 

Course Overview:

This hands-on course provides a comprehensive introduction to programming logic, and builds a solid foundation of programming skills that can be used to master additional programming languages like C, C++, PERL, Java or Python. To learn programming you must focus on a particular language, and we have chosen Java.  In this course you will write and debug programs in Python. If you would like this course to use a different computer language, that can be arranged.

Attendees to PL-115: Fundamentals of Computer Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Writing Simple Programs Data Types, Constants, & Variables
  • Screen Output & Keyboard Input
  • Expressions
  • Decision Making
  • Looping
  • Subroutines
  • Debugging
  • Data Collections – Arrays
  • Data Collections – Classes Working with Files

Prerequisites:

  • This course is for students starting out in programming.  No programming experience is required.

 

Comments

Latest comments from students

User: tsonger

Instructor comments: While I could tell the instructor was very knowledgeable, his instructions were not very clear. He could've done a better job preparing for the class.

Facilities comments: Room was fine. The location of the room could have been better as the dings from the elevator were a bit distractive.

User: TracyPaul

Instructor comments: Very knowledgeable. Diagnosed our programming problems in short order. Could go into the details of 'why', versus only the 'how'.

Facilities comments: Outstanding. The hotel staff did a great job supporting our class.

 

Liked the class?  Then let everyone know!

TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking Course

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.

Attendees to TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Accessing the Network
  • Advanced Fuzzing Techniques
  • Advanced Stack Smashing
  • Attacking the Windows Domain – Enumeration
  • Attacking the Windows Domain – Restricted Desktops
  • Attacking the Windows Domain – The Attacks
  • Building a Metasploit Module
  • Crypto for Penetration Testers
  • Exploiting the Network
  • Fuzzing Introduction and Operation
  • Introduction to Memory and Dynamic Linux Memory
  • Introduction to Windows Exploitation
  • Manipulating the Network
  • Python and Scapy For Penetration Testers
  • Shellcode
  • Smashing the Stack
  • Windows Heap Overflow Introduction
  • Windows Overflows

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: ryanv

Instructor comments: Great.

Facilities comments: N/A. Hotel.

User: sean.hollinger

Instructor comments: Instructor is technically knowledgeable as he has been on every course I've taken with TechNow.

Facilities comments: adequate

Liked the class?  Then let everyone know!

TN-525: Certified Penetration Testing Professional (CPENT)

Course Overview:

A rigorous Pen Testing program that, unlike contemporary Pen Testing courses, teaches you how to perform an effective penetration test across filtered networks. The course requires you to Pen Test IoT systems, OT systems, builds on your ability to write your own exploits, build your own tools, conduct advanced binaries exploitation, double pivot to access hidden networks, and various technologies.

What’s Included:

    • EC-Council official E-Courseware
    • EC-Council official Certificate of Attendance
    • EC-Council iLabs with access for 6 months
    • EC-Council CPENT Range access
    • CEH Exam Voucher

     

    Dates/Locations:

    No Events

    Duration: 5 days

    Course Content:

      • Module 01. Introduction to Penetration Testing
      • Module 02. Penetration Testing Scoping and Engagement
      • Module 03. Open Source Intelligence (OSINT)
      • Module 04. Social Engineering Penetration Testing
      • Module 05. Network Penetration Testing – External
      • Module 06. Network Penetration Testing – Internal
      • Module 07. Network Penetration Testing – Perimeter Devices
      • Module 08. Web Application Penetration Testing
      • Module 09. Wireless Penetration Testing
      • Module 10. IoT Penetration Testing
      • Module 11. OT/SCADA Penetration Testing
      • Module 12. Cloud Penetration Testing
      • Module 13. Binary Analysis and Exploitation
      • Module 14. Report Writing and Post Testing Actions

     

    Prerequisites:

        • Pass the CEH exam
        • Pass the CND exam

    Target Audience:

    Penetration Testers, Ethical Hackers, Information Security Consultants/ Testers/ Analysts/ Engineers, Network Server Administrators, Firewall & System Administrators, Risk Assessment Professionals

     

    Comments

    Latest comments from students

     

    Liked the class?  Then let everyone know!