PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

AZ-500: Microsoft Azure Security Technologies

Course Overview:

Gain the knowledge and skills needed to implement security controls, maintain the security posture, and identify and remediate vulnerabilities by using a variety of security tools. The course covers scripting and automation, virtualization, and cloud N-tier architecture.

After completing this course, students will be able to describe specialized data classifications on Azure, Identify Azure data protection mechanisms, Implement Azure data encryption methods, Secure internet protocols and how to implement them on Azure, Describe Azure security services and features.

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to demonstrate cloud technologies and to effectively manage security in the cloud environment.

Attendees to AZ-500: Microsoft Azure Security Technologies will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Outline:

Identity and access
- Configure Azure Active Directory for Azure workloads and subscriptions
- Configure Azure AD Privileged Identity Management
- Configure security for an Azure subscription
Platform Protection
- Understand cloud security
- Build a network
- Secure network
- Implement host security
- Implement platform security
- Implement subscription security
Security Operations
- Configure security services
- Configure security policies by using Azure Security Center
- Manage security alerts
- Respond to and remediate security issues
- Create security baselines
Data and Applications
- Configure security policies to manage data
- Configure security for data infrastructure
- Configure encryption for data at rest
- Understand application security
- Implement security for application lifecycle
- Secure applications
- Configure and manage Azure Key Vault

Prerequisites :

- - AZ-900: Microsoft Azure Fundamentals
  - Students should have 1-2 years professional development experience and experience with Microsoft Azure.
  - Student must be able to program in an Azure Supported Language.

Comments

Latest comments from students

Liked the class? Then let everyone know!

RH-245: Linux System Administration I

Course Overview:

The System Administration I for Red Hat course is designed for IT professionals working to become full-time enterprise Linux system administrators. This course gives the student direct experience with the most essential system administration tasks in the Red Hat. You will be instructed in crucial system management skills including: configuring network interfaces, client set up of network protocols, managing local disk devices, installation, package management, performing system boot procedures, grub and controlling system processes.

Attendees to RH-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Installation
Manage File Systems and Local Disk Drives
Perform Mounts and Unmounts
Perform System Boot Procedures
Tuning and Maintaining the Kernel
Control System Processes
Perform User Administration
Installing and Managing Services
Perform Package Administration
Client Setup of SSH and Printing

Prerequisites:

TN-125: Introduction to UNIX and Linux

Comments

Latest comments from students

User: mlspence

Instructor comments: Bill was awesome! He did a fantastic job teaching the course mater to everyone in the class. He made sure everyone was able to keep up and that they understood the material before moving on. Thanks!

Facilities comments: They were great as well

Liked the class? Then let everyone know!

TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking Course

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job. This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.

Attendees to TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Accessing the Network
Advanced Fuzzing Techniques
Advanced Stack Smashing
Attacking the Windows Domain – Enumeration
Attacking the Windows Domain – Restricted Desktops
Attacking the Windows Domain – The Attacks
Building a Metasploit Module
Crypto for Penetration Testers
Exploiting the Network
Fuzzing Introduction and Operation
Introduction to Memory and Dynamic Linux Memory
Introduction to Windows Exploitation
Manipulating the Network
Python and Scapy For Penetration Testers
Shellcode
Smashing the Stack
Windows Heap Overflow Introduction
Windows Overflows

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, Networking, and Security Experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: ryanv

Instructor comments: Great.

Facilities comments: N/A. Hotel.

User: sean.hollinger

Instructor comments: Instructor is technically knowledgeable as he has been on every course I've taken with TechNow.

Facilities comments: adequate

Liked the class? Then let everyone know!

TN-8150: CISSP Certification Preparation Seminar

Course Overview:

TechNow's CISSP Certification Preparation Seminar is an accelerated course designed to meet the high demands of the information security industry by preparing students for the industry standard Certified Information Systems Security Professional exam. The exam covers (ISC)²'s 8 Domains from the Common Body of Knowledge, which encompass the whole of information security.

This course is an intense 10 day program that ensures the student passes the CISSP exam on the first try. We encourage our students to take the exam within a week after course completion. The goal for this course is a pass rate of one and done. Our high pass rate reflects the dedication of TechNow's students and our commitment to a ten day program that many in the industry do in 5 days. TechNow has a proven CISSP track record that you can depend on.

Attendees to TN-815: CISSP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time	Event
02/03/2025 - 02/13/2025 08:00 -16:00	TN-8150: CISSP TechNow – San Antonio, TX, San Antonio TX
02/03/2025 - 02/13/2025 08:00 -16:00	TN-8150: CISSP Certification Preparation Seminar TechNow, Inc, San Antonio TX

Duration: 10 Days

Course Objectives:

Our CISSP Professional training program covers the 8 Domains of the CBK in-depth with an emphasis on rigorous exam preparation.

Security and Risk Management (Security, Risk, Compliance, Law, Regulations, Business Continuity)
Asset Security (Protecting Security of Assets)
Security Engineering (Engineering and Management of Security)
Communications and Network Security (Designing and Protecting Network Security)
Identity and Access Management (Controlling Access and Managing Identity)
Security Assessment and Testing (Designing, Performing, and Analyzing Security Testing)
Security Operations (Foundational Concepts, Investigations, Incident Management, Disaster Recovery)
Software Development Security (Understanding, Applying, and Enforcing Software Security)

Prerequisites:

To qualify for this CISSP training program you must first qualify for the CISSP exam, which requires: