N-595: VoIP Security Analysis and Design

Course Overview:

As VoIP (Voice-over IP) is integrated into the operations of many missions, it is imperative to understand its security ramifications. In the N-595: VoIP Security Analysis and Design class the objectives are designed for those who are chartered with the responsibility of securing networks and application environments that incorporate VoIP. Topics include how VoIP works, its interactions with the network, its vulnerabilities and mitigations. Focus is on leading open source and proprietary technologies utilizing Asterisk and Cisco and the protocols SIP, H.323, RTP, MGCP, and Skinny. Other protocols such as Nortel's UNIStim will be addressed. As for Cisco, security pieces in the VoIP CallManager servers, Catalyst switches, IOS-based routers, and ASA firewalls, amounts to several different platforms, each with its own management interface and lockdown procedures. Various open source tools including those in BackTrack are used for VoIP attacks. A task list of actions for securing enterprise VoIP is carried out in hands-on labs, performed on Cisco phones, routers, switches, and ASA firewalls.

Attendees to N-595: VoIP Security Analysis and Design will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

VoIP Architecture
VoIP Signaling and media protocols
Common VoIP authentication mechanisms
Common VoIP encryption techniques
VoIP protocol analysis with Wireshark
Maintaining QoS while mitigating DoS
VoXML, XML, and application integration security
Converged network security design and implementation
Impact of NAT and firewalls
SIP, H.323, and MGCP vulnerabilities
VPN, IPsec and SRTP to secure VoIP services
Penetration testing with open source tools
Attacks for Eavesdropping, call redirection, and DoS
Design of hacked firmware virtualization layer
Concise lockdown steps for network hardware and VoIP

Prerequisites:

This is an advanced Information Security Course which requires basic Windows & UNIX competency
Certification or 2 years of experience in these operating systems is highly recommended
As well as an understanding of TCP/IP

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-929: Security Essentials Training Course

Course Overview:

What a great course that is slightly misnamed! This course may be labeled Security Essentials, but covers much of the subject matter of CISSP! This course does more than just cover the basics. TechNow takes the time to give the student hands on labs to exemplify an objective. Security Essentials Prep Training Course sets the foundation for your security career and sets the expectation of comprehension with more detail than Security+ and more on par with CISSP.

This course provides students skills to take courses that prepare for higher level certifications.

Attendees to TN-929: Security Essentials Training Course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 9 days

Course Objectives:

802.11 Suite of Protocols
Access Control Theory
Alternate Network Mapping Techniques
Authentication and Password Management
Contingency Planning
Crypto Concepts
Crypto Fundamentals
Defense-in-Depth
DNS
Firewall Subversion
Firewalls
HIDS Overview
Honeypots
ICMP
IDS Overview
Incident Handling Fundamentals
Information Warfare
Introduction to OPSEC
IP Packets
IPS Overview
IPv6
Legal Aspects of Incident Handling
Linux/Unix Configuration Fundamentals
Linux/Unix Logging and Log Management
Linux/Unix OS Security Tools and Utilities
Linux/Unix Overview
Linux/Unix Patch Management
Linux/Unix Process and Service Management
Mitnick-Shimomura
Network Addressing
Network Design
Network Hardware
Network Mapping and Scanning
Network Plumbing
Network Protocol
NIDS
OverviewPhysical Security
Policy Framework
Protecting Data at Rest
Public Key Infrastructure
PKI
Reading Packets
Risk Management
Safety Threats
Securing Windows Server Services
Steganography
OverviewTCPUDP
Virtual Machines
Virtual Private Networks VPNs
Viruses and Malicious Code
VoIP
Vulnerability Management Overview
Vulnerability Scanning
Web Application Security
Windows Auditing
Windows Automation and Configuration
Windows Family of Products
Windows Network Security Overview
Windows Permissions & User Rights
Windows Security Templates & Group Policy
Windows Service Packs, Hotfixes and Backups
Windows Workgroups, Active Directory and Group Policy Overview
Wireless Overview

Prerequisites:

Passed CompTIA Security+

Comments

Latest comments from students

User: sjsmith2262

Instructor comments: without question, Dave Askey knows his material!!! great instructor that gave a personalized approach.

Facilities comments: class was taught in a hotel reception area, very nice, quiet and convenient for all people

User: synistry

Instructor comments: Dave was great! (as always). Wealth of knowledge and a master at customizing course content to match the education level of his students. The class kept entirely in pace with where we were at as a group overall on a day to day basis.

Facilities comments: Facilities were overall really nice. The only complaint is that the hotel / conference center had us move rooms on one occasion, and kicked us out early on two others. I would assume this is due to the last minute location change, so I don't think there is anything anyone could have done better in the situation.

Liked the class? Then let everyone know!

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations:

No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-905: Cyber Threat Intelligence Analysis

Course Overview:

TechNow has worked worldwide enterprise infrastructures for over 30 years and has developed demos and labs to exemplify the techniques required to demonstrate technologies that effectively support CTI. This course integrates well with our courses TN-575: Open Source Network Security Monitoring and TN-865: Wireshark Network Traffic and Security Analysis .

TechNow develops Cyber Ranges and makes them available for conferences in support of annual meetings for Cyber Threat Response Teams. Developing scenarios and reacting to them appropriately is a big part of the value in understanding the contexts required to comprehend valuable CTI. As with many advanced TechNow security courses, there is a large hands-on ratio. This course helps Cyber Protection Teams (CPT), Defensive Cyber Operations (DCO), and Mission Defense Teams (MDT) to collect, analyze and apply targeted cyber intelligence to defensive operations in order to proactively act on and tune response to attacks by cyber adversaries. CPT, DCO, and MDT can take preemptive action by utilizing CTI, understanding CTI tools, techniques and procedures (TTPs) needed to generate and consume timely and relevant intelligence to improve resilience and prevention.

This course focuses on the collection, classification, and exploitation of knowledge about adversaries and their TTPs. . MDT puts us close the mission and helps define the internal context to be analyzed against the CTI. TechNow pushes the student to truly understand how to think about and use CTI to make a difference.

Attendees to TN-905: Cyber Threat Intelligence Analysis will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Learn to comprehend and develop complex scenarios
Identify and create intelligence requirements through practices such as threat modeling
Utilize threat modeling to drive intelligence handling and practices
Breakdown tactical, operational, and strategic-level threat intelligence
Generate threat intelligence to detect, respond to, and defeat focused and targeted threats
How to collect adversary information creating better value CTI
How to filter and qualify external sources, mitigating low integrity intelligence
Create Indicators of Compromise (IOCs) in formats such as YARA, OpenIOC, and STIX
Move security maturity past IOCs into understanding and countering the behavioral tradecraft of threats
Breaking down threats mapped against their tradecraft to tweak IOCs
Establish structured analytical techniques to be successful in any security role
Learn and apply structured principles in support of CTI and how to communicate that to any security role.

Course Prerequisites:

Security+, or equivalent experience

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-959: UNIX Security Administrator Course

Course Overview:

The UNIX Security Administrator Prep is a hands-on course that covers how to secure and audit UNIX and Linux operating systems. This includes concepts such as Rootkits, Buffer overflows, and monitoring UNIX/Linux systems.

Attendees to TN-959: Unix Security Administratorwill receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

AIDE
Apache
Best Practices for Kernel Tuning and Warning Banners
Boot Services
Chroot()
DNS- BIND
DNSSec
Evidence Collection and Preservation
Forensic Analysis
Forensic Preparation and Incident Handling
Host Based Firewalls – iptables
Intro to Forensics
OS Install and Patching
Physical, User Account, and Password Access Control
Se Linux
Sendmail
SSH
Stack Smashing
Sudo
Syslog-NG
UNIX Logging

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, networking, and security experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: wbcarter

Instructor comments: Good Stuff. Thanks!

User: ryuhas

Instructor comments: Very Good Instructor

Facilities comments: Facilities was great. Location had a lot to be desired. To much traffic and accidents trying to get here.