TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security. TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Radio Frequency (RF) Fundamentals
Spread Spectrum Technologies
802.11 Network Architecture
Physical & MAC Layers
Hardware Installation, Configuration, & Management
Antennas & Accessories
Wireless Network Management
Troubleshooting Wireless LANs
Site Surveying
Wireless LAN Security
Organizations & Standards

Prerequisites:

Attendees should have network administration skills. These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class? Then let everyone know!

N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

TN-909: Windows Forensic Analysis

Course Overview:

Windows Forensic Analysis is a hands-on course that covers digital forensics of the Microsoft Windows operating system. The collection and analysis of data tracking user based activity that can be used for internal purposes or legal litigation. TechNow has the student analyze many data images for various Windows operating systems, as current as Windows 8.1, Windows 10 in an environment that uses many Cloud technologies such as Office365, Skydrive, Sharepoint, Exchange Online, and Windows Phone.

This is not death by power point. The course is aligned with digital forensic investigators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Windows Forensic Analysis.

Attendees to TN-909: Windows Forensic Analysis will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Windows Operating System Components
Core Forensic Principles
Live Response and Triage-Based Acquisition Techniques
Windows Image Mounting and Examination
Memory, Pagefile, Filesystems
Data and Metadata
Profiling systems and users
Tracking USB and BYOD
Log and Registry Analysis
User Communications
Email Forensics
Browser Forensics
Reporting and Presentation

Course Prerequisites:

Windows and Security Experience

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-765: Automating Administration with Windows Powershell

Course Overview:

This course provides students with the fundamental knowledge and skills to use PowerShell for administering and automating administration of Windows servers. This course provides students the skills to identify and build the command they require to perform a specific task. In addition, students learn how to build scripts to accomplish advanced tasks such as automating repetitive tasks and generating reports. This course provides prerequisite skills supporting a broad range of Microsoft products, including Windows Server, Windows Client, Microsoft Azure, and Microsoft 365. In keeping with that goal, this course will not focus on any one of those products, although Windows Server, which is the common platform for all of those products, will serve as the example for the techniques this course teaches.

Attendees to TN-765: Automating Administration with Windows Powershell will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Describe the functionality of Windows PowerShell and use it to run and find basic commands
Identify and run cmdlets for server administration
Work with Windows PowerShell pipeline
Describe the techniques Windows PowerShell pipeline uses
Use PSProviders and PSDrives to work with other forms of storage
Query system information by using WMI and CIM
Work with variables, arrays, and hash tables
Write basic scripts in Windows PowerShell
Write advanced scripts in Windows PowerShell
Administer remote computers
Use background jobs and scheduled jobs
Use advanced Windows PowerShell techniques

Course Prerequisites:

Experience with Windows networking technologies and implementation.
Experience with Windows Server administration, maintenance, and troubleshooting.

Comments

Latest comments from students

Liked the class? Then let everyone know!

P-315: Intermediate PERL Programming

Course Overview:

PERL programmers need a clear roadmap for improving their skills. Intermediate PERL teaches a working knowledge of PERL's objects, references, and modules — all of which makes the language so versatile and effective. This class offers a thorough introduction to intermediate programming in PERL. Topics include packages and namespaces, references and scoping, manipulating complex data structures, writing and using modules, package implementation, and using CPAN.

Attendees to P-315: Intermediate PERL Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Packages and namespaces
References and scoping
Manipulating complex data structures
Object-oriented programming
Writing and using modules
Testing PERL code
Contributing to CPAN

Prerequisites:

P-245: Programming with PERL or equivalent knowledge and skills

Comments

Latest comments from students

User: J Masters

Instructor comments: Instructor kept it interesting and brought a wealth of knowledge to the classroom environment. Kept a good pace and provided relevant examples.