TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class?  Then let everyone know!

PP-244:CIPM + CIPP/E 4 Day GDPR Ready

PP-244: CIPM + CIPP/E 4 Day GDPR Ready

 

Course Overview:

A combined course of CIPM + CIPP/E. Achieving a CIPM credential shows that you have a comprehensive knowledge of how data protection programs should work across an organization. Combine with a CIPP/E credential and prove that you not only can manage a data protection program, but you understand the regulations that govern them.

With a CIPM and CIPP/E combined you’ll be uniquely equipped to fulfill the DPO requirements of the GDPR. The CIPP/E relates to the knowledge a DPO must have concerning the European legal framework of the legislation, and the CIPM provides theoretical aspects necessary to lead an organization’s data protection policy.

The General Data Protection Regulation (GDPR) takes effect in 2018. Among its mandates is the requirement to appoint a knowledgeable Data Protection Officer (DPO) tasked with monitoring compliance, managing internal data protection activities, training data processing staff, conducting internal audits and more. There’s a lot to know, there’s a lot at stake and there’s a lot of opportunity for data protection professionals with the right training and education. 

What’s Included:

  • Authorized courseware
  • 2 Exam vouchers
  • IAPP membership

**GDPR Regulation Mandated May 25, 2018**

Course Objectives:

See individual courses for details: PP-212: CIPP/E Certified Information Privacy Professional Europe and GDPR Compliance

See individual courses for details: PP-222 CIPM Certified Information Privacy Manager and GDPR Compliance

Attendees to PP-244: CIPM + CIPP/E 4 Day GDPR Ready will receive TechNow approved course materials and expert instruction, and certification test vouchers and certificate of course completion.

TechNow is a International Association of Privacy Professionals (IAPP) Partner, and utilizes official curriculum from International Association of Privacy Professionals (IAPP).

TechNow has taught security courses for over 20 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with international sales and compliance.

 

Document Flow Chart iconsm

Dates/Locations:

No Events

Duration: 4 Days

Course Content:

 

Prerequisites: None

Target Audience:

Data Protection Officers, Data Protection Managers, Auditors, Data Protection Lawyers, Records Managers, Information Officers, Legal Compliance Officers, Human Resource Officers, Security Manager, Information Manager, Anyone who uses processes and maintains personal data

Comments

Latest comments from students

Liked the class?  Then let everyone know!

CT-405: PenTest+

 

 

 

 

 

 

Course Overview:

PenTest+ is an intermediate-level certification for cybersecurity professionals who are tasked with penetration testing to identify, exploit, report, and manage vulnerabilities on a network. PenTest+ is at the same certification level as CT-395: CySA+. Depending on your course of study, PenTest+ and CySA+ can be taken in any order, but typically follow the skills learned in CT-325: Security+. PenTest+ focuses on offense through penetration testing and vulnerability assessment while CySA+ focuses on defense through incident detection and response. The most qualified cybersecurity professionals have both offensive and defensive skills. Attend Tech Now training for hands-on, instructor led course to prepare you for the CompTIA PT0-002 exam. This exam is hands-on, performance-based questions and multiple choice, to ensure each candidate possesses the skills, knowledge, and ability to perform tasks on systems.

 

 

 

 

What’s Included:

  • 5 days of instructor led in classroom training
  • Labs
  • PenTest+ Courseware
  • Exam Voucher
  • PenTest+ onsite exam scheduling

Course Objectives:

  • Plan and scope penetration tests
  • Conduct passive reconnaissance
  • Perform non-technical tests to gather information
  • Conduct active reconnaissance
  • Analyze vulnerabilities
  • Penetrate networks
  • Exploit host-based vulnerabilities
  • Test application
  • Complete post-exploit tasks
  • Analyze and report pen test results

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

    • Module 01. Planning and Scoping Penetration Tests
    • Module 02. Conducting Passive Reconnaissance
    • Module 03. Performing Non-Technical Tests
    • Module 04. Conducting Active Reconnaissance
    • Module 05. Analyzing Vulnerabilities
    • Module 06. Penetrating Networks
    • Module 07. Exploiting Host-Based Vulnerabilities
    • Module 08. Testing Applications
    • Module 09. Completing Post-Exploit Tasks
    • Module 10. Analyzing and Reporting Pen Test Results

 

Prerequisites:

Target Audience:

This course is designed for cybersecurity professionals tasked with penetration testing and vulnerability management.

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-969: Windows Security Administrator Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.  This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs to secure Windows systems. Lecture and labs start with quick review of Active Directory and group policy to enforce security mechanisms within the Windows architecture.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations.  PowerShell is made for SecOps/DevOps automation and students will learn to write PowerShell scripts to automate security operations and Desired State Configuration (DSC).  The course concludes with exercising real attack strategies to demonstrate the effectives of properly securing your host.

Attendees to TN-969: Windows Security Administrator course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Active Directory and BloodHound
  • Security Controls
  • PKI
  • Encryption
  • Wireless & Network Security and Hardening DNS
  • 802.1x and Endpoint Protection
  • Firewalls and VPN
  • PowerShell Scripting
  • JEA, DSC, Enterprise Security with PowerShell
  • Windows Attack Strategies

Prerequisites:

  • Security+
  • Windows System Administration Skills

 

Comments

Latest comments from students

User: bbrabender

Instructor comments: Instructor was very knowledgeable and help more inexperienced users with concepts as well explaining in a way that can be understood.

Facilities comments: N/A

User: dale.r.anderson

Instructor comments: Instructor was well knowlegeable accross alot of domains.

Facilities comments: Pretty good

Liked the class?  Then let everyone know!

N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW

Course Overview:

An in-depth course on how to use and configure Cisco Firepower Threat Defense technology,  from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT).  Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting.  This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.

It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.

Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
  • Configure the Firepower Management Center (FMC)
  • Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
  • Describe the Cisco Firepower Systems infrastructure
  • Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
  • Describe the System Configuration and Health policies and implement them
  • Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
  • Describe, create, and implement objects for use in Access Control policies
  • Create DNS and URL policies and configure Sinkholes
  • Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
  • Describe advanced policy configuration and Firepower system configuration options
  • Configure Malware Policies to find and stop Malware
  • Understand Security Intelligence, and how to configure SI to stop attacks NOW!
  • Configure policies to find and stop Ransomware
  • Understand how to fine tune IPS policies
  • Understand how to find tun Snort Preprocessor policies (NAP)
  • Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
  • Analyze events
  • Create reporting templates and schedule them
  • Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
  • Set up external authentication for users using LDAP/Realms
  • Configuring system integration, realms, and identity sources
  • Configure FMC domains and implement them
  • Configure FTD HA with two FTD devices
  • SSL Policy – decrypt your traffic
  • AnyConnect and Site-to-Site VPN
  • Understand network and host based AMP.  Configure and analyze host based AMP
  • Understand Cisco Identity Services Engine (ISE)
  • Configure ISE and integrate with Cisco FMC identity policy using PxGrid

Prerequisites:

Comments

Latest comments from students

Liked the class?  Then let everyone know!