CL-355: Containers, Kubernetes, and Red Hat OpenShift Administration

Course Overview:

Through an introduction to Docker, Kubernetes, and Red Hat OpenShift Platform, this training course helps you understand one of the key tenets of the DevOps and DevSecOps Platform (DSOP) movement: continuous integration and continuous deployment. The CI/CD pipeline becomes well understood and implemented in an open architecture. Containers have become a key technology for the configuration and deployment of applications and micro services. Kubernetes is a container orchestration platform that provides foundational services in Red Hat OpenShift Container Platform, which allows enterprises to manage container deployments and scale their applications using Kubernetes.

This training course provides an overview of the DoD Enterprise DevSecOps Platform (DSOP) Reference Design, its current state, and ties to DoD Cloud Platform One (P1). Workflows of the DoD Iron Bank container repository are introduced, along with an overview of the DoD Pipeline as represented in Big Bang. Continuous authorization cATO via Party Bus within NIST RMF is presented. You will become aware of the Platform One (P1) integrations and relationship to Docker, Kubernetes, Istio (Red Hat OpenShift Service Mesh) and Red Hat OpenShift Platform.

In addition to gaining an understanding of these tools, you will build core administration skills through the installation, configuration, and management of an OpenShift cluster and containerized applications.

Course Objectives:

Learn about Containers, Docker, Kubernetes, and OpenShift architecture
Overview DoD Enterprise DevSecOps Platform (DSOP) Reference Design and DoD Cloud Platform One (P1)
Tie together awareness of various DoD Cloud offerings and their relationships
Create containerized services
Manage containers and container images
Deploy multi-container applications
Install an OpenShift cluster
Configure and manage masters and nodes
Secure OpenShift
Control access to resources on OpenShift
Monitor and collect metrics on OpenShift
Deploy applications on OpenShift using source-to-image (S2I)
Manage storage on OpenShift

Course Outline:

Getting started with container technology
Creating containerized services
Managing containers
Managing container images
Creating custom container images
Deploying containerized applications on OpenShift
Deploying multi-container applications
Troubleshooting containerized applications
Comprehensive Review of Introduction to Container, Kubernetes, and RedHat OpenShift
Introducing Red Hat OpenShift Container Platform
Installing OpenShift Container Platform
Describing and exploring OpenShift networking concepts
Executing commands
Controlling access to OpenShift resources
Allocating persistent storage
Managing application deployments
Installing and configuring the metrics subsystem
Managing and monitoring OpenShift Container Platform

Dates/Locations:

No Events

Duration: 5 Days

Prerequisites:

Ability to use a Linux® terminal session and issue operating system commands
Good foundation in Linux
Experience with web application architectures and their corresponding technologies

Target Audience:

Developers who wish to containerize software applications
Administrators who are new to container technology and container orchestration
Architects who are considering using container technologies in software architectures
System administrators
System architects
Architects and developers who want to install and configure OpenShift Container Platform
Those working in the field of DevSecOps supporting DoD Platform One (P1) and other implementations

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
08/11/2025 - 08/15/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
11/17/2025 - 11/21/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.

User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments

Liked the class? Then let everyone know!

TN-765: Automating Administration with Windows Powershell

Course Overview:

This course provides students with the fundamental knowledge and skills to use PowerShell for administering and automating administration of Windows servers. This course provides students the skills to identify and build the command they require to perform a specific task. In addition, students learn how to build scripts to accomplish advanced tasks such as automating repetitive tasks and generating reports. This course provides prerequisite skills supporting a broad range of Microsoft products, including Windows Server, Windows Client, Microsoft Azure, and Microsoft 365. In keeping with that goal, this course will not focus on any one of those products, although Windows Server, which is the common platform for all of those products, will serve as the example for the techniques this course teaches.

Attendees to TN-765: Automating Administration with Windows Powershell will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Describe the functionality of Windows PowerShell and use it to run and find basic commands
Identify and run cmdlets for server administration
Work with Windows PowerShell pipeline
Describe the techniques Windows PowerShell pipeline uses
Use PSProviders and PSDrives to work with other forms of storage
Query system information by using WMI and CIM
Work with variables, arrays, and hash tables
Write basic scripts in Windows PowerShell
Write advanced scripts in Windows PowerShell
Administer remote computers
Use background jobs and scheduled jobs
Use advanced Windows PowerShell techniques

Course Prerequisites:

Experience with Windows networking technologies and implementation.
Experience with Windows Server administration, maintenance, and troubleshooting.

Comments

Latest comments from students

Liked the class? Then let everyone know!

CT-325: Security+

Course Overview:

The CT-325: Security+ (SY0-701) class is the primary class you will need to take if your job responsibilities include securing network services, network devices, and network traffic. It will also help you prepare for the CompTIA Security+ examination (exam number SY0-701). In the CT-325: Security+ class you’ll build on your knowledge and professional experience with computer hardware, operating systems, and networks as you acquire the specific skills required to implement basic security services on any type of computer network. Let us help you prepare for the CompTIA Security+ exam (SY0-701).

TechNow is a CompTIA partner and uses official CompTIA Security+ curriculum.

Attendees to CT-325: Security+ will receive TechNow approved course materials and TechNow expert instruction.

Dates/Locations:

Date/Time	Event
08/18/2025 - 08/22/2025 08:00 -16:00	CT-325: Security+ TechNow, Inc, San Antonio TX
10/27/2025 - 10/31/2025 08:00 -20:00	CT-325: Security+ TechNow, Inc, San Antonio TX
12/15/2025 - 12/19/2025 08:00 -16:00	CT-325: Security+ TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

Compare and contrast attacks
Compare and contrast security controls
Use security assessment tools
Explain basic cryptography concepts
Implement a public key infrastructure
Implement identity and access management controls
Manage access services and accounts
Implement a secure network architecture
Install and configure security appliances
Install and configure wireless and physical access security
Deploy secure host, mobile, and embedded systems
Implement secure network access protocols
Implement secure network applications
Explain risk management and disaster recovery concepts
Describe secure application development concepts
Explain organizational security concepts

Prerequisites:

CompTIA A+ and Network+ certifications, or equivalent knowledge.
Windows 7/8/10 and Server 2008/2012/2016 experience required.
Six to nine months experience in networking, including experience in configuring & managing TCP/IP.

Comments

Latest comments from students

User: joshjepsen@hotmail.com

Instructor comments: Instructor was very knowledgeable on all the course content. There were some instances when I felt he streamlined through some of the material too quickly, such as going over how to identify types of attacks.

Liked the class? Then let everyone know!

VM-325: VMware View: Install, Configure and Manage

Course Overview:

This hands-on training course builds your skills in the VMware View^TM suite of products: VMware View Manager, VMware View Composer, and VMware® ThinApp^TM. Based on customer specification, this course can be based on View 4.x or 5.x, and ThinApp 4.x or 5.x releases.

Attendees to VM-325: VMware View: Install, Configure and Manage will receive TechNow approved course materials and expert instruction.

At the end of this course, you should understand the features and operations of View and be able to:

Install and configure View components
Create and manage dedicated and floating desktop pools
Deploy and manage linked-clone virtual desktops
Configure and manage desktops that run in local mode
Configure secure access to desktops through a public network
Use ThinApp to package applications

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Module 1: Course Introduction
Module 2: Introduction to VMware View
Module 3: View Connection Server
Module 4: View Desktops
Module 5: View Client Options
Module 6: View Administratory
Module 7: Configuring and Managing Linked Clones
Module 8: Local-Mode Desktops
Module 9: Command-Line Tools and Backup Options
Module 10: Managing VMware View Security
Module 11: View Manager Performance and Scalability
Module 12: VMware® ThinApp^TM

Prerequisites:

VM-315: VMware Infrastructure: Install, Configure and Manage
Experience in Microsoft Windows Active Directory Administration
Experience with VMware vSphere^TM
Before attending the course, students must be able to perform the following tasks:
- Create a template in VMware vCenter^TM Server and deploy a virtual machine from it
- Modify a template customization file
- Open a virtual machine console in vCenter Server and access the guest operating system
- Configure Active Directory services

Comments

Latest comments from students