PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations:

No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-835: Certified in Risk and Information Systems Control (CRISC) Preparation Seminar

Course Overview:

Certified in Risk and Information Systems Control (CRISC), is for professionals responsible for an organization's risk management program.  Students looking to acquire CRISC qualify themselves as IT security analyst, security engineer architect, information assurance program manager and senior IT auditor.  CRISC certified professionals manage risk, design and oversee response measures, monitor systems for risk, and ensure the organization's risk management strategies are met.

The CRISC exam will primarily align with the terminology and concepts described in The Risk IT Framework, The Risk IT Practioner Guide, and COBIT 5.  This will include applications in the evaluation and monitoring of IT-based risk, as well as the design and implementation of IS controls. 

The CRISC exam covers four domains that are periodically updated to reflect the changing needs of the profession:

  • Domain 1: Risk Identification 
  • Domain 2: Risk Assessment
  • Domain 3: Risk Response and Mitigation
  • Domain 4: Risk and Control Monitoring and Reporting

This course is designed to assist in your exam preparation for the CRISC exam.

Attendees to TN-835: Certified in Risk and Information Systems Control (CRISC) Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Risk IT Framework—Purpose and Principles
  • Essentials of Risk Governance, Evaluation, and Response
  • Risk and Opportunity Management Using CobiT, Val IT and Risk IT
  • The Risk IT Framework Process Model Overview
  • Managing Risk in Practice—The Practitioner Guide Overview
  • Overview of the Risk IT Framework Process Model 
  • The Risk IT Framework

Prerequisites:

A minimum of at least three (3) years of cumulative work experience performing the tasks of a CRISC professional across at least three (3) CRISC domains is required for certification. There are no substitutions or experience waivers.

Comments

Latest comments from students

User: tracycampbell

Instructor comments: Dave had great command of the class and the flow of information. The lessons seem relevant to the exam and the course material should assist greatly with passing. As a bonus, his breakdown of PKI helped with my current job requirements.

Facilities comments: The Home2Suites by Hilton was FANTASTIC!

Liked the class?  Then let everyone know!

TN-545: Certified Network Defender

 


Course Overview:

This course is instructed with an instructor in the classroom with provided lab equipment and Cyber Range.

Students enrolled in the Certified Network Defender course, will gain a detailed understanding and hands on ability to function in real life situations involving network defense. They will gain the technical depth required to actively design a secure network in your organization. This program will be akin to learning math instead of just using a calculator.

This course gives you the fundamental understanding of the true construct of data transfer, network technologies, software technologies so that you understand how networks operate, understand what software is automating and how to analyze the subject material.

You will learn how to protect, detect and respond to, and predict threats on the network.  This builds upon the typical knowledge and skills of Network Administrators in network components, traffic, performance and utilization, network topology, system locations, and security policies.

You will learn network defense fundamentals, the application of network security controls, protocols, perimeter appliances, secure IDS, VPN and firewall configuration. You will then learn the intricacies of network traffic signature, analysis and vulnerability scanning which will help you when you design greater network security policies and successful incident response plans. These skills will help you foster resiliency and continuity of operations during attacks.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

 

What’s Included:

  • EC-Council official E-Courseware
  • EC-Council iLabs access included for 6 months
  • EC-Council official Certificate of Attendance
  • CND Exam Voucher with 1 FREE RETAKE VOUCHER

 

Security Course Flow
Document Flow Chart iconsm

Dates/Locations:

Date/Time Event
09/15/2025 - 09/19/2025
08:00 -16:00 		TN-545: Certified Network Defender
TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Content:

  • Module 01. Network and Defense Strategies
  • Module 02. Administrative Network Security
  • Module 03. Technical Network Security
  • Module 04. Network Perimeter Security
  • Module 05. Endpoint Security-Windows Systems
  • Module 06. Endpoint Security- Linux Systems
  • Module 07. Endpoint Security- Mobile Devices
  • Module 08. Endpoint Security- IoT Devices
  • Module 09. Administrative Application Security
  • Module 10. Data Security
  • Module 11. Enterprise Virtual Network Security
  • Module 12. Enterprise Cloud Network Security
  • Module 13. Enterprise Wireless Network Security
  • Module 14. Network Traffic Monitoring and Analysis
  • Module 15. Network Logs Monitoring and Analysis
  • Module 16. Incident Response and Forensic Investigation
  • Module 17. Business Continuity and Disaster Recovery
  • Module 18. Risk Anticipation with Risk Management
  • Module 19. Threat Assessment with Attack Surface Analysis
  • Module 20. Threat Prediction with Cyber Threat Intelligence

 

Prerequisites:

  • Basic network and host operations knowledge
  • Experience commensurate with one to five years of network, host, or application administration
  • TN-325:Security+   or equivalent

 

Courses to follow:

 

Target Audience:

Network Administrators, Network Security Administrators, Network Security Engineer, Network Defense Technicians, Network Analyst, Security Analyst, Security Operator, and anyone involved in network operations

 

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students

Liked the class?  Then let everyone know!

DoD 8570

DoD 8570 Training

The Department of Defense requires that all information assurance personnel must become compliant with IT and security certification standards.

DoD 8570 training, also called Information Assurance training, is available through TechNow to provide you with the certification that is required.  Your DoD 8570 training  ( information assurance training ) at TechNow will provide you with all of the courses necessary to receive your DoD 8570.01-M certification.

Ongoing open enrollment through TechNow is available for our DoD 8570.01-M courses.

Please review the full & updated DoD approved IA baseline certifications aligned to each category & level of the IA workforce.


 

 

For further information or to schedule for classes, call us at 800-324-2294

 

in   

TN-913: Cloud Security Fundamentals

 

Course Overview:

TechNow Cloud Security Fundamentals addresses the loss of hands-on control of system, application, and data security in the Cloud computing environment.  Security teams wrestle with the impact and liability of Cloud computing on an organization.  This course enables the security team to assist in contract language and Service Level Agreements (SLAs) when utilizing Cloud Service Providers (CSPs).

Compliance and auditing are introduced with strategies for control verification and audit analysis in the CSP environment.  Software as a Service (SaaS) to Infrastructure as a Service (IaaS) and everything in between require a compliance strategy.  Students will go in-depth into the architecture and infrastructure fundamentals for private, public, and hybrid clouds.   Topics covered include: patch and configuration management, virtualization security, application security, and change management. Policy, risk assessment, and governance within cloud environments will be covered with recommendations for both internal policies and contract provisions to consider.

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to effectively manage security in the cloud environment.

Attendees to TN-913: Cloud Security Fundamentals will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 3 days

Course Objectives:

  • Cloud computing introduction
  • Security challenges in the cloud
  • Infrastructure security in the cloud
  • Policy, risk, and governance for cloud computing
  • Compliance and legal considerations
  • Audit and assessment for the cloud
  • Data security in the cloud
  • Identity and Access Management (IAM)
  • Disaster Recovery and Business Continuity Planning (DR/BCP) in the cloud
  • Intrusion detection and incident response

Course Prerequisites:

  • GSEC, CISSP, CASP or equivalent experience in managing enterprise infrastructures
  • Managing or administering at least one of UNIX, Windows, Databases, networking, or security

Comments

Latest comments from students

User: reedrobt

Instructor comments: Dave is like an encyclopedia of technical topics...what "doesn't" he have expertise in?

Facilities comments: Home2 location was well-kept and convenient to other services.

 

Liked the class?  Then let everyone know!