PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content. This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications. Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration: 2 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

Module 0 – Introduction & Overview
Mod 1: Advanced Interface
- Configuration
- Advanced NAT
- Policy-Based
- Forwarding
- Routing Protocols (OSPF)
Mod 2: App-ID™ –
- Custom Applications
- Defining New Application Signatures
- Application Override
Mod 3: Advanced Content-ID™
- Custom Threat Signatures
- Data Filtering
- DoS Protection
- Botnet Report
Mod 4: Advanced User-ID™
- Terminal Server Agent
- Captive Portal
- XML API

Day 2

Mod 5: Quality of Service
- Configuring Quality of Service
Mod 6: GlobalProtect™
- Implementation of GlobalProtect
- Install and Configure Portal, Gateway, and Agents
Mod 7: Monitoring and Reporting
- Log Forwarding
- SNMP
- Reporting
Mod 8: Active/Active High Availability
- Configuring Active/Active HA

Prerequisites:

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

Test2

http://technow.www162-254-253-232.a2hosted.com/palo-alto-firewall-essentials-fasttrack-training-class-course-pa-215/

Course Overview:

PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

This course sets up the foundation for the two day course PA-222: Palo Alto Networks Panorama Essentials.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications.

Attendees to the PA-215: Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:

Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1 Module 0 – Introduction & Overview Module 1 – Administration & Management Configuration Management PAN-OS & Software Updates Service Route Configuration Log Forwarding GUI, CLI, and API Module 2 – Interface Configuration L2 & L3 Vwire Tap Interface Management in Security Zones VLANs QoS	Day 2 Module 3 – Layer 3 Configuration L3 Configuration and DHCP NAT DNS Proxy Policy Based Forwarding in Introduction to IPv6 Module 4 – App-ID App-ID Process Policy Administration Module 5 – Content-ID Antivirus Anti-spyware Vulnerability URL Filtering File Blocking and Wildfire Data Filtering DoS Protection Botnet
Day 3 Module 6 – VM Firewall Downlaod VM Template Configure ESXi Configure VM Module 7 – Decryption SSL Inbound and Outbound Module 8 – Custom Signatures Defining New Application Signatures Application Override Custom Threat ID	Day 4 Module 9 – User-ID User-ID Agent Terminal Server Agent XML API Captive Portal Module 10 – VPN and GlobalProtect Psec Tunnels GlobalProtect Agent Portal Gateway HIP
Day 5 Module 11 – High Availability Active/Passive Active/Active Module 12 – Panorama Device Groups & Objects Shared Policy Configuration Management Reporting

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-575: Open Source Network Security Monitoring

Course Overview:

TN-575: Open Source Network Security Monitoring teaches students how to deploy, build, and run an NSM operation using open source software and vendor-neutral tools. No network is bullet proof and when attackers access your network, this course will show you how to build a security net to detect, contain, and control the attacker. Sensitive data can be monitored and deep packet and deep attachment analysis can be achieved. As organizations stand up a Security Operations Center (SOC) the enterprise NSM is the key ingredient to that SOC. This course not only teaches how to implement an NSM technologically, but how to effectively monitor an enterprise operationally. You will learn how to architect an NSM solution: where to deploy your NSM platforms and how to size them, stand-alone or distributed, and integration into packet analysis, interpret evidence, and integrate threat intelligence from external sources to identify sophisticated attackers. A properly implemented NSM is integral to incident response and provides the responders timely information to react to the incident. TN-575: Open Source Network Security Monitoring is a lab intensive environment with a cyber range that gives each student in-depth knowledge and practical experience monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls.

Attendees to TN-575: Open Source Network Security Monitoring class will receive TechNow approved course materials and expert instruction.

This Course is taught utilizing Security Onion or RockNSM as specified by the customer.

Dates/Locations:

No Events

Duration: 5 Days

Course Objective:

The focus of this course is to present a suite of Open Source security products integrated into a highly functional and scalable Network Security Monitoring solution.

Prerequisites:

Students should have a basic understanding of networks, TCP/IP and standard protocols such as DNS, HTTP, etc. Some Linux knowledge/experience is recommended, but not required

Course Outline:

Network Security Monitoring (NSM) Methodology
High Bandwidth Packet Capture Challenges
Installation of Security Onion
- Use Cases (analysis, lab, stand-alone, distributed)
- Resource Requirements
Configuration
- Setup Phase I – Network Configuration
- Setup Phase 2 – Service Configuration
- Evaluation Mode vs. Configuration Mode
- Verifying Services
Security Onion Architecture
- Configuration Files and Folders
- Network Interfaces
- Docker Environment
- Security Onion Containers
Overview of Security Onion Analyst Tools
- Kibana
- CapME
- CyberChef
- Squert
- Sguil
- NetworkMiner
Quick Review of Wireshark and Packet Analysis
- Display and Capture Filters
- Analyze and Statistics Menu Options
- Analysis for Signatures
Analyzing Alerts
- Replaying Traffic
- 3 Primary Interfaces:
  - Squert
  - Sguil
  - Kibana
- Pivoting Between Interfaces
- Pivoting to Full Packet Capture
Snort and Surricata
- Rule Syntax and Construction
- Implementing Custom Rules
- Implementing Whitelists and Blacklists
Hunting
- Using Kibana to Slice and Dice Logs
- Hunting Workflow with Kibana
Bro
- Introduction and Overview
  - Architecture, Commands
- Understanding and Examining Bro Logs
  - Using AWK, sort, uniq, and bro-cut
- Working with traces/PCAPs
- Bro Scripts Overview
  - Loading and Using Scripts
- Bro Frameworks Overview
  - Bro File Analysis Framework FAF
- Using Bro scripts to carve out more than files
RockNSM ( * If Applicable)
- Kafka
  - Installation and Configuration
  - Kafka Messaging
  - Brokers
  - Integration with Bro and FSF
- File Scanning Framework FSF
  - Custom YARA Signatures
  - JSON Trees
  - Sub-Object Recursion
  - Bro and Suricata Integration
Elastic Stack
- Adding new data sources in Logstash
- Enriching data with Logstash
- Automating with Elastalert
- Building new Kibana dashboards
Production Deployment
- Advanced Setup
- Master vs Sensor
- Node Types – Master, Forward, Heavy, Storage
- Command Line Setup with sosetup.conf
- Architectural Recommendations
- Sensor Placement
- Hardening
- Administration
- Maintenance
Tuning
- Using PulledPork to Disable Rules
- BPF’s to Filter Traffic
- Spinning up Additional Snort / Suricata / Bro Workers to Handle Higher Traffic Loads

Comments

Latest comments from students

Liked the class? Then let everyone know!

AZ-500: Microsoft Azure Security Technologies

Course Overview:

Gain the knowledge and skills needed to implement security controls, maintain the security posture, and identify and remediate vulnerabilities by using a variety of security tools. The course covers scripting and automation, virtualization, and cloud N-tier architecture.

After completing this course, students will be able to describe specialized data classifications on Azure, Identify Azure data protection mechanisms, Implement Azure data encryption methods, Secure internet protocols and how to implement them on Azure, Describe Azure security services and features.

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to demonstrate cloud technologies and to effectively manage security in the cloud environment.

Attendees to AZ-500: Microsoft Azure Security Technologies will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Outline:

Identity and access
- Configure Azure Active Directory for Azure workloads and subscriptions
- Configure Azure AD Privileged Identity Management
- Configure security for an Azure subscription
Platform Protection
- Understand cloud security
- Build a network
- Secure network
- Implement host security
- Implement platform security
- Implement subscription security
Security Operations
- Configure security services
- Configure security policies by using Azure Security Center
- Manage security alerts
- Respond to and remediate security issues
- Create security baselines
Data and Applications
- Configure security policies to manage data
- Configure security for data infrastructure
- Configure encryption for data at rest
- Understand application security
- Implement security for application lifecycle
- Secure applications
- Configure and manage Azure Key Vault

Prerequisites :

- - AZ-900: Microsoft Azure Fundamentals
  - Students should have 1-2 years professional development experience and experience with Microsoft Azure.
  - Student must be able to program in an Azure Supported Language.

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-515: Implementing Cybersecurity and Information Assurance Methodologies

Course Overview:

Learn to protect yourself and your company against hackers, by learning their tools and techniques, and then testing your network. This course is heavily based on Kali and primarily on Metasploit. In TN-515: Implementing Cybersecurity and Information Assurance Methodologies class you will learn the step by step process that hackers use to assess your enterprise network, probe it & hack into it, utilizing a mixed-platform target environment including Windows, Linux, Solaris, and Cisco. This course is 90% hacking, but defenses for demonstrated hacks will be discussed. If you want to know the ins and outs of the hacks presented in this course, then this is the course for you.

Attendees to TN-515: Implementing Cybersecurity and Information Assurance Methodologies Class Attendees will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Introduction to Pen Testing using the PTES model
Metasploit Basics
- MSFconsole, MSFcli, Armitage, MSFpayload, MSFencode, NasmShell
Intelligence Gathering
- Nmap, Databases in Metasploit, Port Scanning with Metasploit
Quick Intro to Ruby
- Writing a simple Ruby script to create a custom scanner
Vulnerability Scanning
- Importing Nessus Results
- Scanning with Nessus from Within Metasploit
Exploitation
- Using the Metasploit Framework and console to exploit
Meterpreter
- Compromising a Windows System
- Attacking MS SQL, xp_cmdshell
- Dumping Usernames and Passwords, extracting and dumping hashes
- Pass the Hash and Token Impersonation
- Pivoting
- Railgun
- Using Meterpreter Scripts: Migrating a process, Killing AV, Persistence
Avoiding Detection
- Creating Stand-Alone Binaries with MSFpayload
- Encoding with MSFencode and Packers (go Green Bay:)
Exploitation Using Client Side Attacks
- Introduction to Immunity Debugger
- Using Immunity Debugger to Decipher NOP Shellcode
Metasploit Auxiliary Modules
Social Engineer Toolkit (SET)
- Spear-Phishing, Web Attack
- Creating a Multipronged Attack
Creating Your Own Module
- Adapt an existing Module
- Add some PowerShell and Run the Exploit
Meterpreter Scripting
Capture The Flag Exercise

Prerequisites:

This is an advanced Cybersecurity and Information Assurance Course which requires basic Windows & UNIX competency
Certification or 2 years of experience in these operating systems is highly recommended
An understanding of TCP/IP

Comments

Latest comments from students