PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations:

No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-835: Certified in Risk and Information Systems Control (CRISC) Preparation Seminar

Course Overview:

Certified in Risk and Information Systems Control (CRISC), is for professionals responsible for an organization's risk management program. Students looking to acquire CRISC qualify themselves as IT security analyst, security engineer architect, information assurance program manager and senior IT auditor. CRISC certified professionals manage risk, design and oversee response measures, monitor systems for risk, and ensure the organization's risk management strategies are met.

The CRISC exam will primarily align with the terminology and concepts described in The Risk IT Framework, The Risk IT Practioner Guide, and COBIT 5. This will include applications in the evaluation and monitoring of IT-based risk, as well as the design and implementation of IS controls.

The CRISC exam covers four domains that are periodically updated to reflect the changing needs of the profession:

Domain 1: Risk Identification
Domain 2: Risk Assessment
Domain 3: Risk Response and Mitigation
Domain 4: Risk and Control Monitoring and Reporting

This course is designed to assist in your exam preparation for the CRISC exam.

Attendees to TN-835: Certified in Risk and Information Systems Control (CRISC) Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Risk IT Framework—Purpose and Principles
Essentials of Risk Governance, Evaluation, and Response
Risk and Opportunity Management Using CobiT, Val IT and Risk IT
The Risk IT Framework Process Model Overview
Managing Risk in Practice—The Practitioner Guide Overview
Overview of the Risk IT Framework Process Model
The Risk IT Framework

Prerequisites:

A minimum of at least three (3) years of cumulative work experience performing the tasks of a CRISC professional across at least three (3) CRISC domains is required for certification. There are no substitutions or experience waivers.

Comments

Latest comments from students

User: tracycampbell

Instructor comments: Dave had great command of the class and the flow of information. The lessons seem relevant to the exam and the course material should assist greatly with passing. As a bonus, his breakdown of PKI helped with my current job requirements.

Facilities comments: The Home2Suites by Hilton was FANTASTIC!

Liked the class? Then let everyone know!

TN-865: Wireshark Network Traffic and Security Analysis

Course Overview:

This course delivers the technical knowledge, insight, and hands-on training to receive in-depth knowledge on Wireshark® and TCP/IP communications analysis. You will learn to use Wireshark to identify the most common causes of performance problems in TCP/IP communications. You will learn about the underlying theory of TCP/IP and the most used application protocols, so that you can intelligently examine network traffic for performance issues or possible Indicators of Compromise (IoC).

Duration: 5 Days

Audience:

Anyone interested in learning to troubleshoot and optimize TCP/IP networks and analyze network traffic with Wireshark, especially network engineers, information technology specialists, and security analysts.

Course Prerequisites:

We recommend that attendees of this course have the following prerequisite:
• Network+

Dates/Locations:

No Events

Course Outline:

DAY ONE

Course Set Up and Analyzer Testing

Network Analysis Overview
Wireshark Functionality Overview
Capturing Wired and Wireless Traffic
Define Global and Personal Preferences for Faster Analysis
Defined Time Values and Interpret Summaries
Interpret Basic Trace File Statistics to Identify Trends
Create and Apply Display Filters for Efficient Analysis

DAY TWO

Follow Streams and Reassemble Data
Use Wireshark’s Expert System to Identify Anomalies
TCP/IP Analysis Overview
Analyze Common TCP/IP Traffic Patterns

DAY THREE

Graph I/O Rates and TCP Trends
802.11 (WLAN) Analysis Fundamentals
Voice over IP (VoIP) Analysis Fundamentals
Network Forensics Fundamentals

DAY FOUR

Detect Scanning and Discovery Processes
Analyze Suspect Traffic

DAY FIVE

Use Command‐Line Tools

TN-5315: Configuring Windows Devices

Course Overview:
This five-day instructor-led course provides IT professionals with the knowledge and skills required to deploy and manage Windows 10 desktops, devices, and applications in an enterprise environment. Students will learn how to plan and implement Windows 10 deployments in large organizations. Students will also learn how to manage the Windows 10 installations after deployment to provide secure identity and data access by using technologies related to User Experience Virtualization (UE-V), Group Policy, Work Folders and Client Hyper-V. To support a variety of device and data management solutions, Microsoft Azure Active Directory (Azure AD), Microsoft Intune, Microsoft Store for Business and Office 365 are used for device management. These services are part of the Enterprise Mobility+ Security, which provides identity and access management, cloud-based device management, application and update management, and more secure data access to information stored both on the cloud and onsite within your corporate network.

Attendees to TN-5315: Configuring Windows Devices will receive TechNow approved course materials and expert instruction.
Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Manage Identity
Plan Desktop and Device Deployment
Plan and Implement a Microsoft 365 Solution
Configure Networking
Configure Storage
Manage Data Access and Protection
Manage Remote Access
Manage Apps
Manage Updates and Recovery

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-8150: CISSP Certification Preparation Seminar

Course Overview:

TechNow's CISSP Certification Preparation Seminar is an accelerated course designed to meet the high demands of the information security industry by preparing students for the industry standard Certified Information Systems Security Professional exam. The exam covers (ISC)²'s 8 Domains from the Common Body of Knowledge, which encompass the whole of information security.

This course is an intense 10 day program that ensures the student passes the CISSP exam on the first try. We encourage our students to take the exam within a week after course completion. The goal for this course is a pass rate of one and done. Our high pass rate reflects the dedication of TechNow's students and our commitment to a ten day program that many in the industry do in 5 days. TechNow has a proven CISSP track record that you can depend on.

Attendees to TN-815: CISSP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 10 Days

Course Objectives:

Our CISSP Professional training program covers the 8 Domains of the CBK in-depth with an emphasis on rigorous exam preparation.

Security and Risk Management (Security, Risk, Compliance, Law, Regulations, Business Continuity)
Asset Security (Protecting Security of Assets)
Security Engineering (Engineering and Management of Security)
Communications and Network Security (Designing and Protecting Network Security)
Identity and Access Management (Controlling Access and Managing Identity)
Security Assessment and Testing (Designing, Performing, and Analyzing Security Testing)
Security Operations (Foundational Concepts, Investigations, Incident Management, Disaster Recovery)
Software Development Security (Understanding, Applying, and Enforcing Software Security)

Prerequisites:

To qualify for this CISSP training program you must first qualify for the CISSP exam, which requires: