Security Course Flow
Here is our list of security related courses.
Course Overview:
This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security. TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.
Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.
Dates/Locations:
No Events
Duration: 5 Days
Course Objectives:
- Radio Frequency (RF) Fundamentals
- Spread Spectrum Technologies
- 802.11 Network Architecture
- Physical & MAC Layers
- Hardware Installation, Configuration, & Management
- Antennas & Accessories
- Wireless Network Management
- Troubleshooting Wireless LANs
- Site Surveying
- Wireless LAN Security
- Organizations & Standards
Prerequisites:
Attendees should have network administration skills. These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.
Comments
Latest comments from students
User: TMPRIESTLEY
Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!
Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.
Liked the class? Then let everyone know!
Course Overview:
TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.
This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.
Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.
Date/Locations:
This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093
No Events
Duration: 10 days
Course Objectives:
-
- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices
Lab Objectives:
-
-
- Get started with Cisco Command-Line Interface (CLI)
- Observe How a Switch Operates
- Perform Basic Switch Configuration
- Implement the Initial Switch Configuration
- Inspect TCP/IP Applications
- Configure an Interface on a Cisco Router
- Configure and Verify Layer 2 Discovery Protocols
- Implement an Initial Router Configuration
- Configure Default Gateway
- Explore Packet Forwarding
- Troubleshoot switch Media and Port Issues
- Troubleshoot Port Duplex Issues
- Configure Basic IPv6 Connectivity
- Configure and Verify IPv4 Static Routes
- Configure Iv6 Static Routes
- Implement IPv4 Static Routing
- Implement IPv6 Static Routing
- Configure VLAN and Trunk
- Troubleshoot VLANs and Trunk
- Configure a Router on a Stick
- Implement Multiple VLANs and Basic Routing Between the VLANs
- Configure and Verify Single-Area OSPF
- Configure and Verify EtherChannel
- Improve Redundant Switched Topologies with EtherChannel
- Configure and Verify IPv4 ACLs
- Implement Numbered and Named IPv4 ACLs
- Configure a Provider-Assigned IPv4 Address
- Configure Static NAT
- Configure Dynamic NAT and Port Address Translation (PAT)
- Implement PAT
- Log into the WLC
- Monitor the WLC
- Configure a Dynamic (VLAN) Interface
- Configure a DHCP Scope
- Configure a WLAN
- Define a Remote Access Dial-In User Service (RADIUS) Server
- Explore Management Options
- Explore the Cisco DNA Center
- Configure and Verify NTP
- Configure System Message Logging
- Create the Cisco IOS Image Backup
- Upgrade Cisco IOS Image
- Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
- Secure Console and Remote Access
- Enable and Limit Remote Access Connectivity
- Secure Device Administrative Access
- Configure and Verify Port Security
- Implement Device Hardening
-
Prerequisites:
-
-
- Familiarity in the following networking topics:
- TCP/IP
- IP Configuration
- Peer-to-Peer Networking
- Subnetting
- Building a Routing Table
- It is not required but highly recommended to have the following certifications:
- Familiarity in the following networking topics:
-
Comments
Latest comments from students
User: kdinivahi29
Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material
User: MikeWisn
Instructor comments: Did exceptional job explaining complicated concepts.
Facilities comments: Hotel front desk phone ringing loudly during class was distracting.
Liked the class? Then let everyone know!
Course Overview:
TN-225: Network+ Skills Class is a five-day course that teaches students the fundamentals of networking. Through hands-on training, students learn the vendor-independent networking skills & concepts that affect all aspects of networking, such as installing & configuring the TCP/IP client.
Attendees to the TN-225: Network+ Skills Class will receive TechNow approved course materials and expert instruction.
Please Note: This course is designed with a focus on skills and is not a preparation course for certification.
Dates/Locations:
No Events
Duration 5 days
Course Objectives:
- Introduction Defining Networking
- Building a Network with OSI
- Hardware Concepts
- Ethernet Basics
- Modern Ethernet
- Non-Ethernet Networks
- Installing a Physical Network
- Wireless Networking
- Protocols
- TCP/IP
- Network Operating Systems
- Sharing Resources
- Going Large with TCP/IP
- TCP/IP & the Internet
- Remote Connectivity
- Protecting Your Network
- Interconnecting Network Operating Systems
- The Perfect Server
- Zen & the Art of Network Support
Prerequisites:
- A+ Skills Course or A+ Certification Course is recommended
Comments
Latest comments from students
User: dsm
Instructor comments: great presentation
Facilities comments: too cold
User: fillyok
Instructor comments: He has an excellent way of explaining things on the level that anyone can understand easily. I wasn't looking forward to this class at all but I'm really glad I attended now. I have a much clearer understanding of networking fundamentals that I never would've received via CBTs. I'd heard really good things about Tim Burkard's teaching skills and now I know they're true. I wouldn't mind taking other classes that he teaches,
Facilities comments: The facilities are really nice and there weren't any problems as far as I could tell. The hotel staff is very nice.
Like the class? Then let everyone know!
Course Overview:
TN-575: Open Source Network Security Monitoring teaches students how to deploy, build, and run an NSM operation using open source software and vendor-neutral tools. No network is bullet proof and when attackers access your network, this course will show you how to build a security net to detect, contain, and control the attacker. Sensitive data can be monitored and deep packet and deep attachment analysis can be achieved. As organizations stand up a Security Operations Center (SOC) the enterprise NSM is the key ingredient to that SOC. This course not only teaches how to implement an NSM technologically, but how to effectively monitor an enterprise operationally. You will learn how to architect an NSM solution: where to deploy your NSM platforms and how to size them, stand-alone or distributed, and integration into packet analysis, interpret evidence, and integrate threat intelligence from external sources to identify sophisticated attackers. A properly implemented NSM is integral to incident response and provides the responders timely information to react to the incident. TN-575: Open Source Network Security Monitoring is a lab intensive environment with a cyber range that gives each student in-depth knowledge and practical experience monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls.
Attendees to TN-575: Open Source Network Security Monitoring class will receive TechNow approved course materials and expert instruction.
This Course is taught utilizing Security Onion or RockNSM as specified by the customer.
Dates/Locations:
No Events
Duration: 5 Days
Course Objective:
The focus of this course is to present a suite of Open Source security products integrated into a highly functional and scalable Network Security Monitoring solution.
Prerequisites:
Students should have a basic understanding of networks, TCP/IP and standard protocols such as DNS, HTTP, etc. Some Linux knowledge/experience is recommended, but not required
Course Outline:
- Network Security Monitoring (NSM) Methodology
- High Bandwidth Packet Capture Challenges
- Installation of Security Onion
- Use Cases (analysis, lab, stand-alone, distributed)
- Resource Requirements
- Configuration
- Setup Phase I – Network Configuration
- Setup Phase 2 – Service Configuration
- Evaluation Mode vs. Configuration Mode
- Verifying Services
- Security Onion Architecture
- Configuration Files and Folders
- Network Interfaces
- Docker Environment
- Security Onion Containers
- Overview of Security Onion Analyst Tools
- Kibana
- CapME
- CyberChef
- Squert
- Sguil
- NetworkMiner
- Quick Review of Wireshark and Packet Analysis
- Display and Capture Filters
- Analyze and Statistics Menu Options
- Analysis for Signatures
- Analyzing Alerts
- Replaying Traffic
- 3 Primary Interfaces:
- Squert
- Sguil
- Kibana
- Pivoting Between Interfaces
- Pivoting to Full Packet Capture
- Snort and Surricata
- Rule Syntax and Construction
- Implementing Custom Rules
- Implementing Whitelists and Blacklists
- Hunting
- Using Kibana to Slice and Dice Logs
- Hunting Workflow with Kibana
- Bro
- Introduction and Overview
- Architecture, Commands
- Understanding and Examining Bro Logs
- Using AWK, sort, uniq, and bro-cut
- Working with traces/PCAPs
- Bro Scripts Overview
- Loading and Using Scripts
- Bro Frameworks Overview
- Bro File Analysis Framework FAF
- Using Bro scripts to carve out more than files
- Introduction and Overview
- RockNSM ( * If Applicable)
- Kafka
- Installation and Configuration
- Kafka Messaging
- Brokers
- Integration with Bro and FSF
- File Scanning Framework FSF
- Custom YARA Signatures
- JSON Trees
- Sub-Object Recursion
- Bro and Suricata Integration
- Kafka
- Elastic Stack
- Adding new data sources in Logstash
- Enriching data with Logstash
- Automating with Elastalert
- Building new Kibana dashboards
- Production Deployment
- Advanced Setup
- Master vs Sensor
- Node Types – Master, Forward, Heavy, Storage
- Command Line Setup with sosetup.conf
- Architectural Recommendations
- Sensor Placement
- Hardening
- Administration
- Maintenance
- Tuning
- Using PulledPork to Disable Rules
- BPF’s to Filter Traffic
- Spinning up Additional Snort / Suricata / Bro Workers to Handle Higher Traffic Loads
Comments
Latest comments from students