N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI)

Course Overview:

The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR).

Attendees to N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-410 Implementing Cisco® Enterprise Advanced Routing and Services (ENARSI) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
Optimize OSPFv2 and OSPFv3 behavior
Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
Implement route redistribution using filtering mechanisms
Troubleshoot redistribution
Implement path control using Policy-Based Routing (PBR) and IP Service Level Agreement (SLA)
Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
Optimize MP-BGP in IPv4 and IPv6 environments
Troubleshoot MP-BGP for IPv4 and IPv6
Describe the features of Multiprotocol Label Switching (MPLS)
Describe the major architectural components of an MPLS VPN
Identify the routing and packet forwarding functionalities for MPLS VPNs
Explain how packets are forwarded in an MPLS VPN environment
Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
Implement Dynamic Host Configuration Protocol (DHCP)
Describe the tools available to secure the IPV6 first hop
Troubleshoot Cisco router security features
Troubleshoot infrastructure security and services

Prerequisites:

CCNA certification
N-415: Implementing and Operating Cisco Enterprise Network Core Technologies
General understanding of network fundamentals
Basic knowledge of how to implement LANs
General understanding of how to manage network devices
General understanding of how to secure network devices
Basic knowledge of network automation

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
11/18/2024 - 11/22/2024 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.

User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments

Liked the class? Then let everyone know!

PP-222: CIPM Certified Information Privacy Manager and GDPR Compliance

Course Overview:

Every organization has data protection needs. Every day, we access, share and manage data across companies, continents and the globe. Knowing how to implement a privacy program is an invaluable sill that will help you protect your organization’s data- and take your career to the next level. Our Principles of Privacy Program Management training is the premier course on implementing a privacy program framework, managing the privacy program operational lifecycle and structuring a privacy team. With a CIPM and CIPP/E combined you’ll be uniquely equipped to fulfill the DPO requirements of the GDPR. Here is our CIPM + CIPP/E 4 Day GDPR Ready

What’s Included:

Authorized courseware
Exam voucher
IAPP membership

**GDPR Regulation Mandated May 25, 2018**

Course Objectives:

Principles of Privacy Program Management is the how-to training on implementing a privacy program framework, managing the privacy program operational lifecycle and structuring a knowledgeable, high-performing privacy team. Those taking this course will learn the skills to manage privacy in an organization through process and technology-regardless of jurisdiction or industry. The Principles of Privacy Program Management training is based on the body of knowledge for the IAPP’s ANSI accredited Certified Information Privacy Manager (CIPM) certification program.

Attendees to PP-222: CIPM Certified Information Privacy Manager and GDPR Compliance will receive TechNow approved course materials and expert instruction, and certification test voucher and certificate of course completion.

TechNow is a International Association of Privacy Professionals (IAPP) Partner, and utilizes official curriculum from International Association of Privacy Professionals (IAPP).

TechNow has taught security courses for over 20 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales and compliance.

Dates/Locations:

No Events

Duration: 2 Days

Course Content:

Module 1: Introduction to Privacy Program Management
Module 2: Privacy Governance
Module 3: Applicable Laws and Regulations
Module 4: Data Assessments
Module 5: Policies
Module 6: Data Subjects’ Rights
Module 7: Training and Awareness
Module 8: Protecting Personal Information
Module 9: Data Breach Incident Plans
Module 10: Measuring, Monitoring and Auditing Program Performance

Prerequisites: None

Target Audience:

Data Protection Officers, Data Protection Managers, Auditors, Legal Compliance Officers, Security Manager, Information Managers, Anyone who uses processes and maintains personal data

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-965 Windows Security Automation with Powershell

Course Overview:

PowerShell is made for Security Operations (SecOps) automation on Windows. SecOps requires automation in order to scale out security changes and monitoring beyond a handful of hosts. For example, when a vulnerability must be remediated but there is no patch for it yet, automation is needed to quickly and consistently enact the changes necessary. PowerShell “remoting” is encrypted remote command execution of PowerShell scripts in a way that can scale to thousands of endpoints and servers.

Imagine being able to hunt for indicators of compromise across thousands of machines with just a few lines of PowerShell code. Or imagine having the local Administrator account password reset every night on thousands of endpoints in a secure way, and being able to retrieve that password securely too.

We will show you to do these tasks and more. Transcription logging for forensics, strong encryption code signing, application whitelisting of scripts, IPSec port control, and Just Enough Admin (JEA).

As more and more of our systems are moved up to the cloud, PowerShell will become even more important. Amazon Web Services, Microsoft Azure, Office 365, Hyper-V and VMware already support PowerShell administration for many tasks.

Attendees to TN-965: Windows Security Automation with PowerShell will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
11/18/2024 - 11/22/2024 08:30 -16:30	TN-965: Cloud Security Fundamentals TechNow, Inc, San Antonio TX

Duration: 5 days

Intended Audience
This course is intended for IT Professionals already experienced in general Windows Server and Windows Client administration or already experienced in administering and supporting Application servers and services including applications like Exchange, SharePoint, and SQL. It is broadly intended for students who want to use Windows PowerShell to automate administrative tasks from the command line, using any Microsoft or independent software vendor (ISV) product that supports Windows PowerShell manageability.

Course Objectives:

PowerShell Overview and Tips

- Getting started running commands
- Using and updating the built-in help
- Execution policies
- Fun tricks with the ISE graphical editor
- Piping .NET and COM objects, not text
- Using properties and methods of objects
- Helping Linux admins feel more at home
- Aliases, cmdlets, functions, modules, etc.
- Customizing your profile script

What Can We Do With PowerShell

- PowerShell remote command execution
- Fan-out remoting and security
- File copy via PowerShell remoting
- Capturing the output of commands
- Parsing text files and logs with regex patterns
- Searching remote event logs faster with XPath
- Mounting the registry as a drive
- Exporting data to CSV, HTML and JSON files
- Parsing and mining nmap port scanner XML output
- Running scripts as scheduled jobs
- Pushing out scripts through Group Policy
- Importing modules and dot-sourcing functions
- http://www.PowerShellGallery.com

Write your own scripts

- Writing your own functions
- Passing arguments into your scripts
- Function parameters and returning output
- Flow control: if-then, do-while, foreach, switch
- The .NET Framework class library: a playground
- How to pipe data in/out of your scripts

Continuous Secure Configuration Enforcement

- How to use Group Policy and PowerShell together
- Automate with INF security templates
- How to customize INF templates
- Microsoft Security Compliance Manager (SCM)
- SECEDIT.EXE scripting
- Building an in-house security repository for SecOps/DevOps
- NSA’s Secure Host Baseline GPOs

Group Policy Precision Targeting

- Managing Group Policy Objects (GPOs) with PowerShell
- LSDOU, Block Inheritance, Enforced GPOs
- Group Policy permissions for targeting changes
- ADMX templates for mass registry editing
- Deploying PowerShell startup and logon scripts
- WMI item-level targeting of GPO preferences
- GPO scheduled tasks to run PowerShell scripts
- Remote command execution via GPO (not remoting)
- Empowering the Hunt Team to fight back!

Server Hardening for SecOps/DevOps

- Server Manager scripting with PowerShell
- Adding and removing roles and feature
- Remotely inventory roles, features, and apps
- Why Server Nano or Server Core
- Running PowerShell automatically after service failure
- Service account identities, passwords, and risks
- Tools to reset service account passwords securely

PowerShell Desired State Configuration (DSC)

- DSC is Configuration Management built in for free
- Using DSC for continuous reinforcement of settings
- Writing your own DSC configuration scripts
- Free DSC resource modules: www.PowerShellGallery.com
- How to push DSC configurations to many targets
- DSC background job processing in push mode
- Examples: sync files, install roles, manage groups
- Auditing a remote target against a DSC MOF template
- “ApplyAndAutoCorrect” mode for continuous enforcement

PowerShell Just Enough Admin (JEA)

- JEA is Windows sudo, like on Linux
- JEA is Windows setuid root, like on Linux
- Restricting commands and arguments
- Verbose transcription logging
- How to set up and configure JEA
- Privilege Access Workstations (PAWs)

PowerShell and WMI

- Windows Management Instrumentation (WMI) service
- What is WMI and why do hackers abuse it so much?
- Using PowerShell to query WMI CIM classes
- WMI authentication and traffic encryption
- Inventory operating system versions and installed software
- WMI remote command execution versus PowerShell remoting
- PowerShell security best practices
- PowerShell transcription logging to catch hackers

Prerequisites:

Previous Windows Server and Windows Client management knowledge and hands on experience.
Experience installing and configuring Windows Server into existing enterprise environments, or as standalone installations.
Knowledge and experience of network adapter configuration, basic Active Directory user administration, and basic disk configuration.
Knowledge and hands on experience specifically with Windows Server 2012/Windows Server 2012 R2 and Windows 8/Windows 8.1 would be of benefit but is not essential.

Comments

Latest comments from students