Course Overview:

TechNow has worked worldwide enterprise infrastructures for over 30 years and has developed demos and labs to exemplify the techniques required to demonstrate technologies that effectively support CTI.  This course integrates well with our courses TN-575: Open Source Network Security Monitoring and TN-865: Wireshark Network Traffic and Security Analysis .

TechNow develops Cyber Ranges and makes them available for conferences in support of annual meetings for Cyber Threat Response Teams.  Developing scenarios and reacting to them appropriately is a big part of the value in understanding the contexts required to comprehend valuable CTI.   As with many advanced TechNow security courses, there is a large hands-on ratio.  This course helps Cyber Protection Teams (CPT), Defensive Cyber Operations (DCO), and Mission Defense Teams (MDT) to collect, analyze and apply targeted cyber intelligence to defensive operations in order to proactively act on and tune response to attacks by cyber adversaries.  CPT, DCO, and MDT can take preemptive action by utilizing CTI, understanding CTI tools, techniques and procedures (TTPs) needed to generate and consume timely and relevant intelligence to improve resilience and prevention.

This course focuses on the collection, classification, and exploitation of knowledge about adversaries and their TTPs. .  MDT puts us close the mission and helps define the internal context to be analyzed against the CTI.  TechNow pushes the student to truly understand how to think about and use CTI to make a difference.

Attendees to TN-905: Cyber Threat Intelligence Analysis will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Learn to comprehend and develop complex scenarios
  • Identify and create intelligence requirements through practices such as threat modeling
  • Utilize threat modeling to drive intelligence handling and practices 
  • Breakdown tactical, operational, and strategic-level threat intelligence
  • Generate threat intelligence to detect, respond to, and defeat focused and targeted threats
  • How to collect adversary information creating better value CTI
  • How to filter and qualify external sources, mitigating low integrity intelligence
  • Create Indicators of Compromise (IOCs) in formats such as YARA, OpenIOC, and STIX
  • Move security maturity past IOCs into understanding and countering the behavioral tradecraft of threats
  • Breaking down threats mapped against their tradecraft to tweak IOCs
  • Establish structured analytical techniques to be successful in any security role
  • Learn and apply structured principles in support of CTI and how to communicate that to any security role.

Course Prerequisites:

Comments

Latest comments from students


 

Liked the class?  Then let everyone know!

  

Course Overview: 

Learn to protect yourself and your company against hackers, by learning their tools and techniques, and then testing your network.  This course is heavily based on Kali and primarily on Metasploit.  In TN-515: Implementing Cybersecurity and Information Assurance Methodologies class you will learn the step by step process that hackers use to assess your enterprise network, probe it & hack into it, utilizing a mixed-platform target environment including Windows, Linux, Solaris, and Cisco.  This course is 90% hacking, but  defenses for demonstrated hacks will be discussed.  If you want to know the ins and outs of the hacks presented in this course, then this is the course for you.

Attendees to TN-515: Implementing Cybersecurity and Information Assurance Methodologies Class Attendees will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Introduction to Pen Testing using the PTES model
  • Metasploit Basics
    • MSFconsole, MSFcli, Armitage, MSFpayload, MSFencode, NasmShell
  • Intelligence Gathering
    • Nmap, Databases in Metasploit, Port Scanning with Metasploit
  • Quick Intro to Ruby
    • Writing a simple Ruby script to create a custom scanner
  • Vulnerability Scanning
    • Importing Nessus Results
    • Scanning with Nessus from Within Metasploit
  • Exploitation
    • Using the Metasploit Framework and console to exploit
  • Meterpreter
    • Compromising a Windows System
    • Attacking MS SQL, xp_cmdshell
    • Dumping Usernames and Passwords, extracting and dumping hashes
    • Pass the Hash and Token Impersonation
    • Pivoting
    • Railgun
    • Using Meterpreter Scripts: Migrating a process, Killing AV, Persistence
  • Avoiding Detection
    • Creating Stand-Alone Binaries with MSFpayload
    • Encoding with MSFencode and Packers (go Green Bay:)
  • Exploitation Using Client Side Attacks
    • Introduction to Immunity Debugger
    • Using Immunity Debugger to Decipher NOP Shellcode
  • Metasploit Auxiliary Modules
  • Social Engineer Toolkit (SET)
    • Spear-Phishing, Web Attack
    • Creating a Multipronged Attack
  • Creating Your Own Module
    • Adapt an existing Module
    • Add some PowerShell and Run the Exploit
  • Meterpreter Scripting
  • Capture The Flag Exercise

Prerequisites:

  • This is an advanced  Cybersecurity and Information Assurance Course which requires basic Windows & UNIX competency
  • Certification or 2 years of experience in these operating systems is highly recommended
  • An understanding of TCP/IP

Comments

Latest comments from students


  

Liked the class?  Then let everyone know!

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       

Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students


Like the class?  Then let everyone know!

Course Overview:

The  UNIX Security Administrator Prep is a hands-on course that covers how to secure and audit UNIX and Linux operating systems. This includes concepts such as Rootkits, Buffer overflows, and monitoring UNIX/Linux systems.

Attendees to TN-959: Unix Security Administratorwill receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • AIDE
  • Apache
  • Best Practices for Kernel Tuning and Warning Banners
  • Boot Services
  • Chroot()
  • DNS- BIND
  • DNSSec
  • Evidence Collection and Preservation
  • Forensic Analysis
  • Forensic Preparation and Incident Handling
  • Host Based Firewalls – iptables
  • Intro to Forensics
  • OS Install and Patching
  • Physical, User Account, and Password Access Control
  • Se Linux
  • Sendmail
  • SSH
  • Stack Smashing
  • Sudo
  • Syslog-NG
  • UNIX Logging

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking, and security experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

 

Comments

Latest comments from students


User: wbcarter

Instructor comments: Good Stuff. Thanks!


User: ryuhas

Instructor comments: Very Good Instructor

Facilities comments: Facilities was great. Location had a lot to be desired. To much traffic and accidents trying to get here.


Liked the class?  Then let everyone know!

Course Overview:

This is an advanced course that assumes the attendee is a qualified security professional with experience using security tools and understands the concepts behind penetration testing. Courses that build up the expertise that enables a student to succeed in this course is Security+, CEH, CISSP, and any of the GIAC certifications. This course is completely hands-on and utilizes the BackTrack tool suite from backtrack-linux.org. The course covers, in detail, various attacks and tools that are contained in the BackTrack tool suite.

Attendees to TN-335: Advanced Penetration Testing Using Open Source Tools will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Information Security and Open Source Software
  • Operating System Tools
  • Firewalls
  • Scanners
  • Vulnerability Scanners
  • Network Sniffers
  • Intrusion Detection Systems
  • Analysis and Management Tools
  • Encryption Tools
  • Wireless Tools
  • Forensic Tools
  • More on Open Source Software

Prerequisites:

  • Experience in IT Security
  • Solid basic knowledge of networks and TCP/IP
  • Experience in command line under Linux and Windows is required

 

Comments

Latest comments from students


Liked the class?  Then let everyone know!