TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security. TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Radio Frequency (RF) Fundamentals
Spread Spectrum Technologies
802.11 Network Architecture
Physical & MAC Layers
Hardware Installation, Configuration, & Management
Antennas & Accessories
Wireless Network Management
Troubleshooting Wireless LANs
Site Surveying
Wireless LAN Security
Organizations & Standards

Prerequisites:

Attendees should have network administration skills. These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class? Then let everyone know!

TN-565: Nessus Vulnerability & Compliance Auditing

Course Overview:

This course provides security professionals with the skills and knowledge to perform vulnerability and compliance scanning of supported operating systems, devices, and applications. Students will construct custom scan policies for topology discovery, network vulnerability detection, credentialed patch audits, and compliance benchmarks, and discuss the underlying technologies utilized by the Nessus scanner.

This course provides students with the necessary information to prepare for the Tenable Certified Nessus Auditor (TCNA) exam.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Introduction to Nessus and Vulnerability Scanning
Nessus Installation and Administration
Basic Nessus Scan Operation
Nessus Scan Configuration and Policy Creation
Vulnerability Analysis and Reporting with Nessus
Advanced Scan Configuration and Policy Creation
Introduction to Compliance and Auditing
Nessus Auditing Features
Windows System Auditing
Unix System Auditing
Cisco IOS Auditing
Nessus Database Auditing
Nessus Content Auditing
Auditing to Industry Guidelines
Auditing to Federal Guidelines

Prerequisites:

Students should possess a basic understanding of TCP/IP networking, operating systems security, and common client/server applications.

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
11/18/2024 - 11/22/2024 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.

User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments

Liked the class? Then let everyone know!

PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231)

Course Overview: PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231) Training Class is a two-day course that teaches students strategies in defense against cyberthreats. Successful completion of this course enables administrators to better understand the threat landscape. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-242: Palo Alto Networks Firewall Manaage Cyberthreats (EDU-231) Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration: 2 days

Course Objectives: Students attending this training course will gain an understanding of cyberthreats and their characteristics. Students will learn how to manage cyberthreats using security policies, profiles, and signatures to protect their network against emerging threats.

Day 1

Mod 1: Threat Landscape
- Advanced Persistent
- Threats
- Data Breaches and Tactics
- Threat Management
- Strategies
Mod 2: Integrated
- Approach to Threat
- Protection
- Integrated Approach to
- Protection
- Next-Generation Firewall
- Advanced Endpoint
- Protection
Mod 3: Network Visibility
- Zero Trust Model
- SSL Decryption
- Decryption Policy
Mod 4: Reducing the Attack
- Surf
- ection

Day 2

Mod 5: Handling Known
- Threats
- WildFire Analysis
- Security Profiles
Mod 6: Handling Unknown
- Traffic and Zero-Day Exploits
- WildFire
- Researching Threat Events
- Identifying Unknown
- Applications
Mod 7: Investigating
- Breaches
- Identify IOCs Using
- App-Scope
- Log Correlation
- Finding Infected Host
Mod 8: Using Custom
- Signatures
- Creating Custom App-IDs
- Threat Signatures

Prerequisites:

Students must complete the PA-213: Install, Configure, and Manage course
Understanding of network concepts, including routing, switching, and IP addressing
In-depth knowledge of port-based security and security technologies such as IPS, proxy, and content filtering

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-525: Certified Penetration Testing Professional (CPENT)

Course Overview:

A rigorous Pen Testing program that, unlike contemporary Pen Testing courses, teaches you how to perform an effective penetration test across filtered networks. The course requires you to Pen Test IoT systems, OT systems, builds on your ability to write your own exploits, build your own tools, conduct advanced binaries exploitation, double pivot to access hidden networks, and various technologies.

What’s Included:

- EC-Council official E-Courseware
- EC-Council official Certificate of Attendance
- EC-Council iLabs with access for 6 months
- EC-Council CPENT Range access
- CEH Exam Voucher
Dates/Locations:

No Events

Duration: 5 days

Course Content:
- - Module 01. Introduction to Penetration Testing
  - Module 02. Penetration Testing Scoping and Engagement
  - Module 03. Open Source Intelligence (OSINT)
  - Module 04. Social Engineering Penetration Testing
  - Module 05. Network Penetration Testing – External
  - Module 06. Network Penetration Testing – Internal
  - Module 07. Network Penetration Testing – Perimeter Devices
  - Module 08. Web Application Penetration Testing
  - Module 09. Wireless Penetration Testing
  - Module 10. IoT Penetration Testing
  - Module 11. OT/SCADA Penetration Testing
  - Module 12. Cloud Penetration Testing
  - Module 13. Binary Analysis and Exploitation
  - Module 14. Report Writing and Post Testing Actions
Prerequisites:
- - - Pass the CEH exam
    - Pass the CND exam
Target Audience:

Penetration Testers, Ethical Hackers, Information Security Consultants/ Testers/ Analysts/ Engineers, Network Server Administrators, Firewall & System Administrators, Risk Assessment Professionals

Comments

Latest comments from students

Liked the class? Then let everyone know!