TN-905: Cyber Threat Intelligence Analysis

Course Overview:

TechNow has worked worldwide enterprise infrastructures for over 30 years and has developed demos and labs to exemplify the techniques required to demonstrate technologies that effectively support CTI. This course integrates well with our courses TN-575: Open Source Network Security Monitoring and TN-865: Wireshark Network Traffic and Security Analysis .

TechNow develops Cyber Ranges and makes them available for conferences in support of annual meetings for Cyber Threat Response Teams. Developing scenarios and reacting to them appropriately is a big part of the value in understanding the contexts required to comprehend valuable CTI. As with many advanced TechNow security courses, there is a large hands-on ratio. This course helps Cyber Protection Teams (CPT), Defensive Cyber Operations (DCO), and Mission Defense Teams (MDT) to collect, analyze and apply targeted cyber intelligence to defensive operations in order to proactively act on and tune response to attacks by cyber adversaries. CPT, DCO, and MDT can take preemptive action by utilizing CTI, understanding CTI tools, techniques and procedures (TTPs) needed to generate and consume timely and relevant intelligence to improve resilience and prevention.

This course focuses on the collection, classification, and exploitation of knowledge about adversaries and their TTPs. . MDT puts us close the mission and helps define the internal context to be analyzed against the CTI. TechNow pushes the student to truly understand how to think about and use CTI to make a difference.

Attendees to TN-905: Cyber Threat Intelligence Analysis will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Learn to comprehend and develop complex scenarios
Identify and create intelligence requirements through practices such as threat modeling
Utilize threat modeling to drive intelligence handling and practices
Breakdown tactical, operational, and strategic-level threat intelligence
Generate threat intelligence to detect, respond to, and defeat focused and targeted threats
How to collect adversary information creating better value CTI
How to filter and qualify external sources, mitigating low integrity intelligence
Create Indicators of Compromise (IOCs) in formats such as YARA, OpenIOC, and STIX
Move security maturity past IOCs into understanding and countering the behavioral tradecraft of threats
Breaking down threats mapped against their tradecraft to tweak IOCs
Establish structured analytical techniques to be successful in any security role
Learn and apply structured principles in support of CTI and how to communicate that to any security role.

Course Prerequisites:

Security+, or equivalent experience

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

AZ-900: Microsoft Azure Fundamentals

Course Overview:

This three-day course will provide foundational level knowledge on cloud concepts; core Azure services; security, privacy, compliance, and trust; and Azure pricing and support.

NOTE: This course provides an Azure pass and time for you to participate in hands-on labs. The content for this course aligns to AZ-900 exam objective domain

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to demonstrate cloud technologies and to effectively manage security in the cloud environment

Attendees to AZ-900: Microsoft Azure Fundamentals will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
11/12/2024 - 11/13/2024 08:00 -16:00	AZ-900: Microsoft Azure Fundamentals TechNow, Inc, San Antonio TX

Course Duration: 3 days

Course Outline:

Cloud Concepts
Core Azure Services
Security, Privacy, Compliance, And Trust
Azure Pricing and Support

Lab Objectives:

- Create a virtual machine
- Deploy Azure container instances
- Create a virtual network
- Create blob storage
- Create a SQL database
- Implement an Azure IoT Hub
- Implement Azure Functions
- Create a web app
- Create a VM with a Template
- Create a VM with PowerShell
- Create a VM with CLI
- Secure network traffic
- Implement Azure key vault
- Create an Azure Policy
- Manage access with RBAC
- Manage resource locks
- Implement resource tagging
- Exploring the Trust Center
- Use the Azure Pricing Calculator
- Use the Azure TCO Calculator
- Open a Support request
- Calculate composite SLAs
- Access Azure Preview features

Prerequisites :

- - There are no prerequisites for taking this course. Technical IT experience is not required however some general IT knowledge or experience would be beneficial.
  - This course is suitable for IT personnel who are just beginning to work with Azure.
  - This course primarily uses the Azure portal to create services and does not require scripting skills.
  - Students in this course will gain confidence to take other role-based courses and certifications, such as Azure Administrator.
  - This course provides an Azure pass and optional lab environment.

Comments

Latest comments from students

Liked the class? Then let everyone know!

Security Course Flow

We are often asked what is the recommended sequence of classes. Here is our recommended sequence of classes for The Security Field.

Certified Information Security Manager (CISM)

CT-325 CompTIA Security+

TN-825 Certified Information Security Manager

Certified Information Systems Auditor(CISA)

CT-325 CompTIA Security+

TN-425 Certified Ethical Hacker

TN-822: Certified Information Systems Auditor (CISA)

Certified Information Systems Security Professional(CISSP)

CT-325 CompTIA Security+

TN-425 Certified Ethical Hacker

TN-815 CISSP Certification Prep Seminar

TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security. TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Radio Frequency (RF) Fundamentals
Spread Spectrum Technologies
802.11 Network Architecture
Physical & MAC Layers
Hardware Installation, Configuration, & Management
Antennas & Accessories
Wireless Network Management
Troubleshooting Wireless LANs
Site Surveying
Wireless LAN Security
Organizations & Standards

Prerequisites:

Attendees should have network administration skills. These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.