Test2

  

http://technow.www162-254-253-232.a2hosted.com/palo-alto-firewall-essentials-fasttrack-training-class-course-pa-215/

  

Course Overview:

PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-222: Palo Alto Networks Panorama Essentials.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications.

Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:  

Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

  

Like the class?  Then let everyone know!

PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231)

  

 

Course Overview:  PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231) Training Class is a two-day course that teaches students strategies in defense against cyberthreats.  Successful completion of this course enables administrators to better understand the threat landscape.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-242: Palo Alto Networks Firewall Manaage Cyberthreats  (EDU-231) Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this training course will gain an understanding of cyberthreats and their characteristics.  Students will learn how to manage cyberthreats using security policies, profiles, and signatures to protect their network against emerging threats.

Day 1

  • Mod 1: Threat Landscape
    • Advanced Persistent
    • Threats
    • Data Breaches and Tactics
    • Threat Management
    • Strategies
  • Mod 2: Integrated
    • Approach to Threat
    • Protection
    • Integrated Approach to
    • Protection
    • Next-Generation Firewall
    • Advanced Endpoint
    • Protection
  • Mod 3: Network Visibility
    • Zero Trust Model
    • SSL Decryption
    • Decryption Policy
  • Mod 4: Reducing the Attack
    • Surf
    • ection

 

Day 2

  • Mod 5: Handling Known
    • Threats
    • WildFire Analysis
    • Security Profiles
  • Mod 6: Handling Unknown
    • Traffic and Zero-Day Exploits
    • WildFire
    • Researching Threat Events
    • Identifying Unknown
    • Applications
  • Mod 7: Investigating
    • Breaches
    • Identify IOCs Using
    • App-Scope
    • Log Correlation
    • Finding Infected Host
  • Mod 8: Using Custom
    • Signatures
    • Creating Custom App-IDs
    • Threat Signatures

A

Prerequisites:

  • Students must complete the PA-213: Install, Configure, and Manage course
  • Understanding of network concepts, including routing, switching, and IP addressing
  • In-depth knowledge of port-based security and security technologies such as IPS, proxy, and content filtering

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-969: Windows Security Administrator Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.  This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs to secure Windows systems. Lecture and labs start with quick review of Active Directory and group policy to enforce security mechanisms within the Windows architecture.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations.  PowerShell is made for SecOps/DevOps automation and students will learn to write PowerShell scripts to automate security operations and Desired State Configuration (DSC).  The course concludes with exercising real attack strategies to demonstrate the effectives of properly securing your host.

Attendees to TN-969: Windows Security Administrator course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Active Directory and BloodHound
  • Security Controls
  • PKI
  • Encryption
  • Wireless & Network Security and Hardening DNS
  • 802.1x and Endpoint Protection
  • Firewalls and VPN
  • PowerShell Scripting
  • JEA, DSC, Enterprise Security with PowerShell
  • Windows Attack Strategies

Prerequisites:

  • Security+
  • Windows System Administration Skills

 

Comments

Latest comments from students

User: bbrabender

Instructor comments: Instructor was very knowledgeable and help more inexperienced users with concepts as well explaining in a way that can be understood.

Facilities comments: N/A

User: dale.r.anderson

Instructor comments: Instructor was well knowlegeable accross alot of domains.

Facilities comments: Pretty good

Liked the class?  Then let everyone know!

TN-812: Information Systems Security Engineering Professional (ISSEP)

Course Overview:

This concentration was developed in conjunction with the U.S. National Security Agency (NSA) providing an invaluable tool for any systems security engineering professional. CISSP®-ISSEP is the guide for incorporating security into projects, applications, business processes, and all information systems. Security professionals are hungry for workable methodologies and best practices that can be used to integrate security into all facets of business operations. The SSE model taught in the IATF portion of the course is a guiding light in the field of information security and the incorporation of security into all information systems.

Attendees to TN-812: Information Systems Secuirty Engineering Professional (ISSEP) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Systems Security Engineering
  • Certification and Accreditation
  • Technical Management
  • U.S. Government Information Assurance Governance

Prerequisites:

Comments

Latest comments from students

User: fsarisen

Instructor comments: Thank you Tim for all the great information! I am confident that I'll do well on the ICND exam.

User: storoy30

Instructor comments: The instructor, Tim Burkard, was very knowledgeable on the course material and skilled at explain more complex ideas.

Liked the class?  Then let everyone know?

cheddarcon-powershell-threat-hunting-registration

After you press "Request Registration" near the bottom of this form, within 30 seconds, status will be provided at the bottom of the form, you will also be contacted by phone for credit card information.

Tech Now is pleased to have the opportunity to provide you training for "Windows Security Automation and Threat Hunting with PowerShell” at CheddarCon 2018!

Scroll down to see the course description.

First Name*
Last Name*
Your Email*
Your Organization*
Phone*

Questions:

After you press "Request Registration" on this form, within 30 seconds, status will be provided at the bottom of the form, you will also be contacted by phone for credit card information.

Windows Security Automation and Threat Hunting with PowerShell Seminar

Location: 400 W Wisconsin Ave, Milwaukee, WI 53203, USA

Date: October 10, 2018 8:00am – 4:00pm

Duration: 8 hours

Audience: Cyber Security professionals and Windows administrators

Attendees Environment: Laptops not required, but suggested to have better hands-on absorption of subject matter.

Description:
PowerShell is both a command-line shell and scripting language. Fight fires quickly using existing or custom PowerShell commands or scripts at the shell. PowerShell is made for Security Operations (SecOps) automation on Windows. This seminar does not require prior programming skills. The seminar focuses on PowerShell programming, giving a beginner skills to be productive in windows scripting to automate tasks and also remediate problems.

Cyber Security is the objective of this seminar, and the PowerShell examples will demonstrate PowerShell capabilities that help lock down a Windows system and also report security status.

Objectives:

PowerShell Overview

  • Getting started running commands
  • Security cmdlets
  • Using and updating the built-in help
  • Execution policies
  • Fun tricks with the ISE graphical editor
  • Piping .NET and COM objects, not text
  • Using properties and methods of objects
  • Helping Linux admins feel more at home
  • Aliases, cmdlets, functions, modules, etc.

PowerShell Utilities and Tips

  • Customizing your profile script
  • PowerShell remote command execution
  • Security setting across the network
  • File copy via PowerShell remoting
  • Capturing the output of commands
  • Parsing text files and logs with regex patterns
  • Parsing Security Logs
  • Searching remote event logs
  • Mounting the registry as a drive
  • Security settings in the Registry
  • Exporting data to CSV, HTML and JSON files
  • Running scripts as scheduled jobs
  • Continued Security Compliance
  • Pushing out scripts through Group Policy
  • Importing modules and dot-sourcing functions
  • http://www.PowerShellGallery.com

PowerShell Scripting

  • PowerShell Scripting to implement Security Practices
  • Writing your own functions to automate security status and settings
  • Passing arguments into your scripts
  • Function parameters and returning output
  • Flow control: if-then, foreach, that make security decisions
  • How to pipe data in/out of your scripts for security compliance and reporting

Attendees to this seminar, Windows Security Automation and Threat Hunting with PowerShell, will receive TechNow approved course materials and expert instruction.[/wr_text][/wr_column][/wr_row]