VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives

Course Overview:

This course explores the VMware Infrastructure and related security, which consists of VMware ESX Server & VMware Virtual Center Server. We will look at both the design environments and operational processes of the VMware Infrastructure including security. This course provides IT architects with the insight needed to tackle tough issues in server virtualization such as virtual machine technologies, storage infrastructure, and designing clustered environments with security practices included. Extensive hands-on labs provide for a rich student experience.

Hypervisors and their supporting environment require attention to security due to the aggregated risk of hosting multiple virtual servers. This course explores the security of virtualized environments. Student configure ESXi by learning to manage the security and risk between ESXi, virtual servers and security integration of ESXi to the physical network infrastructure including appropriate segregation from other sensitive networks and management networks. How to configure virtual networks when some hosts are dual or multi homed, but internally segregate between the two or more connected networks with different security levels. Appropriate integration of zero-clients and thin clients. Configuration of defensive measures on hosts, servers, hypervisors within the virtual environment and practices for those guarding it externally. Integration of Active Directory and other AAA/CIA related services relative to a virtualized environment.

Students are also walked through DoD ESXi Security Technical Implementation Guide (STIG). Introduction to the impact of Intel Trusted Execution Technology integrated with ESXi to create a trusted platform for virtual machines. Additionally the instructor walks the students through NIST Special Publication 800-125A: Security Recommendations for Hypervisor Deployment on Servers, and NIST Special Publication 800-125B: Secure Virtual Network Configuration for Virtual Machine (VM) Protection.

Attendees to “VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives” will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

• Virtual Infrastructure Overview
• ESX and ESXi Server Installation
• Configuration of Networking, Scalability and Security
• Storage
• Install and Configure vCenter Server and Components
• Creation, Deployment, Management, and Migration of Virtual Machines
• Utilize vCenter Server for Resource Management
• Utilize vCenter Server for Virtual Machine Access Control and User Managment
• Use vCenter Server to increase scalability
• Monitoring Your Environment
• Data & Availability Protection Troubleshooting
• Use VMware vCenter Update Manager to apply ESXi patches
• Use vCenter Server to manage vMotion, HA, DRS and data protection.

PA-215: Palo Alto Networks Firewall Essentials FastTrack

Course Overview: PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course combines PA-213 and PA-212 and adds a half day introduction to Panorama and Troubleshooting. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-232: Palo Alto Networks Panorama Manage Multiple Firewalls. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications. Attendees to the PA-215: Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration 5 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS). Additionally Panorama and Troubleshooting are addressed.

Day 1 Module 0 – Introduction & Overview Module 1 – Administration & Management Configuration Management PAN-OS & Software Updates Service Route Configuration Log Forwarding GUI, CLI, and API Module 2 – Interface Configuration L2 & L3 Vwire Tap Interface Management in Security Zones VLANs QoS	Day 2 Module 3 – Layer 3 Configuration L3 Configuration and DHCP NAT DNS Proxy Policy Based Forwarding in Introduction to IPv6 Module 4 – App-ID App-ID Process Policy Administration Module 5 – Content-ID Antivirus Anti-spyware Vulnerability URL Filtering File Blocking and Wildfire Data Filtering DoS Protection Botnet
Day 3 Module 6 – VM Firewall Downlaod VM Template Configure ESXi Configure VM Module 7 – Decryption SSL Inbound and Outbound Module 8 – Custom Signatures Defining New Application Signatures Application Override Custom Threat ID	Day 4 Module 9 – User-ID User-ID Agent Terminal Server Agent XML API Captive Portal Module 10 – VPN and GlobalProtect Psec Tunnels GlobalProtect Agent Portal Gateway HIP
Day 5 Module 11 – High Availability Active/Passive Active/Active Module 12 – Panorama Device Groups & Objects Shared Policy Configuration Management Reporting

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

User: rod3535@gmail.com

Instructor comments: Instructor was great, he explained everything and made sure we understood the process's/product. He also took time out of his own schedule to help set up a VM environment on our personal pc's.

Facilities comments: Facility was great, enjoyed feeding the deers!

Like the class? Then let everyone know!

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-225: Network+ Skills Class

Course Overview:

TN-225: Network+ Skills Class is a five-day course that teaches students the fundamentals of networking. Through hands-on training, students learn the vendor-independent networking skills & concepts that affect all aspects of networking, such as installing & configuring the TCP/IP client.

Attendees to the TN-225: Network+ Skills Class will receive TechNow approved course materials and expert instruction.

Please Note: This course is designed with a focus on skills and is not a preparation course for certification.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:

Introduction Defining Networking
Building a Network with OSI
Hardware Concepts
Ethernet Basics
Modern Ethernet
Non-Ethernet Networks
Installing a Physical Network
Wireless Networking
Protocols
TCP/IP
Network Operating Systems
Sharing Resources
Going Large with TCP/IP
TCP/IP & the Internet
Remote Connectivity
Protecting Your Network
Interconnecting Network Operating Systems
The Perfect Server
Zen & the Art of Network Support

Prerequisites:

A+ Skills Course or A+ Certification Course is recommended

Comments

Latest comments from students

User: dsm

Instructor comments: great presentation

Facilities comments: too cold

User: fillyok

Instructor comments: He has an excellent way of explaining things on the level that anyone can understand easily. I wasn't looking forward to this class at all but I'm really glad I attended now. I have a much clearer understanding of networking fundamentals that I never would've received via CBTs. I'd heard really good things about Tim Burkard's teaching skills and now I know they're true. I wouldn't mind taking other classes that he teaches,

Facilities comments: The facilities are really nice and there weren't any problems as far as I could tell. The hotel staff is very nice.

Like the class? Then let everyone know!

cheddarcon-powershell-threat-hunting-registration

Windows Security Automation and Threat Hunting with PowerShell Seminar

Location: 400 W Wisconsin Ave, Milwaukee, WI 53203, USA

Date: October 10, 2018 8:00am – 4:00pm

Duration: 8 hours

Audience: Cyber Security professionals and Windows administrators

Attendees Environment: Laptops not required, but suggested to have better hands-on absorption of subject matter.

Description:
PowerShell is both a command-line shell and scripting language. Fight fires quickly using existing or custom PowerShell commands or scripts at the shell. PowerShell is made for Security Operations (SecOps) automation on Windows. This seminar does not require prior programming skills. The seminar focuses on PowerShell programming, giving a beginner skills to be productive in windows scripting to automate tasks and also remediate problems.

Cyber Security is the objective of this seminar, and the PowerShell examples will demonstrate PowerShell capabilities that help lock down a Windows system and also report security status.

Objectives:

PowerShell Overview

Getting started running commands
Security cmdlets
Using and updating the built-in help
Execution policies
Fun tricks with the ISE graphical editor
Piping .NET and COM objects, not text
Using properties and methods of objects
Helping Linux admins feel more at home
Aliases, cmdlets, functions, modules, etc.

PowerShell Utilities and Tips

Customizing your profile script
PowerShell remote command execution
Security setting across the network
File copy via PowerShell remoting
Capturing the output of commands
Parsing text files and logs with regex patterns
Parsing Security Logs
Searching remote event logs
Mounting the registry as a drive
Security settings in the Registry
Exporting data to CSV, HTML and JSON files
Running scripts as scheduled jobs
Continued Security Compliance
Pushing out scripts through Group Policy
Importing modules and dot-sourcing functions
http://www.PowerShellGallery.com

PowerShell Scripting

PowerShell Scripting to implement Security Practices
Writing your own functions to automate security status and settings
Passing arguments into your scripts
Function parameters and returning output
Flow control: if-then, foreach, that make security decisions
How to pipe data in/out of your scripts for security compliance and reporting

Attendees to this seminar, Windows Security Automation and Threat Hunting with PowerShell, will receive TechNow approved course materials and expert instruction.[/wr_text][/wr_column][/wr_row]

First Name*
Last Name*
Your Email*
Your Organization*
Phone*