PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-959: UNIX Security Administrator Course

Course Overview:

The  UNIX Security Administrator Prep is a hands-on course that covers how to secure and audit UNIX and Linux operating systems. This includes concepts such as Rootkits, Buffer overflows, and monitoring UNIX/Linux systems.

Attendees to TN-959: Unix Security Administratorwill receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • AIDE
  • Apache
  • Best Practices for Kernel Tuning and Warning Banners
  • Boot Services
  • Chroot()
  • DNS- BIND
  • DNSSec
  • Evidence Collection and Preservation
  • Forensic Analysis
  • Forensic Preparation and Incident Handling
  • Host Based Firewalls – iptables
  • Intro to Forensics
  • OS Install and Patching
  • Physical, User Account, and Password Access Control
  • Se Linux
  • Sendmail
  • SSH
  • Stack Smashing
  • Sudo
  • Syslog-NG
  • UNIX Logging

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking, and security experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

 

Comments

Latest comments from students

User: wbcarter

Instructor comments: Good Stuff. Thanks!

User: ryuhas

Instructor comments: Very Good Instructor

Facilities comments: Facilities was great. Location had a lot to be desired. To much traffic and accidents trying to get here.

Liked the class?  Then let everyone know!

TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class?  Then let everyone know!

L-295: Linux System Administration II

Course Overview:

In this course students will learn to configure the Linux kernel, install & configure modules, to install and configure non-default devices and automate installation with Kickstart. Students also utilize skills developed in L-245 to expand on file system configuration with spanning devices and RAID. This is the foremost server side Linux course in the industry covering all server side components such as DHCP, Samba, NIS, LDAP, inet, telnet ftp, dns, etc.  Expanding on security introduced in L-245: Linux System Administration I, TCP wrappers, firewalling with IP filters, SQUID, & ssh are covered.

Attendees to L-295: Linux System Administration II will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Custom installation of a Linux server
  • Linux device naming conventions & the boot process
  • Adding peripheral devices
  • Reconfiguring the kernel
  • Disk partitioning & formatting
  • Changing system run levels
  • Adding startup files for additional services
  • Adding & removing software packages
  • Disk & file system Administration
  • Terminals & modem configuration
  • Configuring NFS to support the client/server environment
  • Use the automounter
  • Server side components such as DHCP, Samba, NIS, LDAP, inet, telnet, ftp, DNS, etc.
  • Troubleshooting techniques
  • Advanced Linux installation

Prerequisites:

Comments

Latest comments from students

Liked the class?  Then let everyone know!

CL-218: Introduction to Cloud Infrastructure and Operations Bootcamp

 

Course Overview:

This bootcamp is a customized course for Cloud Essentials+ and Cloud+ that leverages 8 days to provide greater value than just the delivery of two separate courses. The 8 days of instruction prepare the student for the CCSP course.

TechNow has Identified overlap and uses time saved to:

  • Introduce hands-on skills (Open Source and AWS)
  • Go more in-depth on theory using hands-on to reinforce concepts
  • Do exam prep with practice questions

This course covers the knowledge and skills required to understand standard Cloud terminologies/methodologies, to implement, maintain, and deliver cloud technologies and infrastructures (e.g. server, network, storage, and virtualization technologies), and to understand aspects of IT security and use of industry best practices related to cloud implementations and the application of virtualization.

This bootcamp helps prepare students for 2 certifications, CompTIA Clouds Essentials+ and CompTIA Cloud+.  After this course students will also be prepared to continue their education by taking CL-315: CCSP – Certified Cloud Security Professional Preparation Seminar .

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to demonstrate cloud technologies and to effectively manage security in the cloud environment.

TechNow is a CompTIA partner and uses official CompTIA Cloud Essentials+ and CompTIA Cloud+ curriculum.

Attendees to CL-218: Introduction to Cloud Infrastructure and Operations Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 8 days

Course Objectives:

  • Learn the fundamental concepts of cloud computing
  • Learn the business aspects and impacts of cloud computing
  • Differentiate the types of cloud solutions and the adoptions measures for each
  • Identify the technical challenges and the mitigation measures involved in cloud computing
  • Identify the technical challenges and the mitigation measures involved in cloud computing
  • Identify the steps to successfully adopt cloud services
  • Identify the basic concepts of ITIL and describe how the ITIL framework is useful in the implementation of cloud computing in an organization
  • Identify the possible risks involved in cloud computing and the risk mitigation measures, and you will also identify the potential cost considerations for the implementation of cloud and its strategic benefits
  • Prepare to deploy cloud solutions
  • Deploy a pilot project
  • Test a pilot project deployment
  • Design a secure network for cloud deployment
  • Determine CPU and memory sizing for cloud deployments
  • Plan Identity and Access Management for cloud deployments
  • Analyze workload characteristics to ensure successful migration to the cloud
  • Secure systems to meet access requirements
  • Maintain cloud systems
  • Implement backup, restore, and business continuity measures
  • Analyze cloud systems for required performance
  • Analyze cloud systems for anomalies and growth forecasting
  • Troubleshoot deployment, capacity, automation, and orchestration issues
  • Troubleshoot connectivity issues
  • Troubleshoot security issues

Course Prerequisites:

  • Security+, Network+ or equivalent experience
  • Managing or administering at least one of UNIX, Windows, Databases, networking, or security

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!