TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking Course

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job. This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.

Attendees to TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Accessing the Network
Advanced Fuzzing Techniques
Advanced Stack Smashing
Attacking the Windows Domain – Enumeration
Attacking the Windows Domain – Restricted Desktops
Attacking the Windows Domain – The Attacks
Building a Metasploit Module
Crypto for Penetration Testers
Exploiting the Network
Fuzzing Introduction and Operation
Introduction to Memory and Dynamic Linux Memory
Introduction to Windows Exploitation
Manipulating the Network
Python and Scapy For Penetration Testers
Shellcode
Smashing the Stack
Windows Heap Overflow Introduction
Windows Overflows

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, Networking, and Security Experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: ryanv

Instructor comments: Great.

Facilities comments: N/A. Hotel.

User: sean.hollinger

Instructor comments: Instructor is technically knowledgeable as he has been on every course I've taken with TechNow.

Facilities comments: adequate

Liked the class? Then let everyone know!

N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

TN-8150: CISSP Certification Preparation Seminar

Course Overview:

TechNow's CISSP Certification Preparation Seminar is an accelerated course designed to meet the high demands of the information security industry by preparing students for the industry standard Certified Information Systems Security Professional exam. The exam covers (ISC)²'s 8 Domains from the Common Body of Knowledge, which encompass the whole of information security.

This course is an intense 10 day program that ensures the student passes the CISSP exam on the first try. We encourage our students to take the exam within a week after course completion. The goal for this course is a pass rate of one and done. Our high pass rate reflects the dedication of TechNow's students and our commitment to a ten day program that many in the industry do in 5 days. TechNow has a proven CISSP track record that you can depend on.

Attendees to TN-815: CISSP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time	Event
12/02/2024 - 12/13/2024 08:00 -16:00	TN-8150: CISSP Certification Preparation Seminar TechNow, Inc, San Antonio TX
02/03/2025 - 02/13/2025 08:00 -16:00	TN-8150: CISSP Certification Preparation Seminar TechNow, Inc, San Antonio TX

Duration: 10 Days

Course Objectives:

Our CISSP Professional training program covers the 8 Domains of the CBK in-depth with an emphasis on rigorous exam preparation.

Security and Risk Management (Security, Risk, Compliance, Law, Regulations, Business Continuity)
Asset Security (Protecting Security of Assets)
Security Engineering (Engineering and Management of Security)
Communications and Network Security (Designing and Protecting Network Security)
Identity and Access Management (Controlling Access and Managing Identity)
Security Assessment and Testing (Designing, Performing, and Analyzing Security Testing)
Security Operations (Foundational Concepts, Investigations, Incident Management, Disaster Recovery)
Software Development Security (Understanding, Applying, and Enforcing Software Security)

Prerequisites:

To qualify for this CISSP training program you must first qualify for the CISSP exam, which requires:

4 years of experience in the information security field
or 3 years experience & a college degree

Contact TechNow to verify that you qualify.

Comments

Latest comments from students

Facilities comments:

User: pulliamp

Instructor comments:

Liked the class? Then let everyone know!

L-245: Linux System Administration I

Course Overview:

In this course students will learn to install the Linux™ operating system, to administer users and software, to use vi, basic Linux security, process control, file system maintenance, backup and recovery, including some basic networking concepts. This course insures that students have the skills to configure all desktop and client side related activity.

Attendees to L-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Linux operating system installation
Hardware Issues
LILO & GRUB Configuration
Managing the Linux file system
Boot Process
Customization of setup files
System Startup
Run Levels
Network Services
User Management
Changing Passwords
Monitoring, accessing & restricting root system access
Administration Tools
Disk Management
Quotas
Process Control
Installing & removing software & patches
Network Configuration
Client side components of NFS, Samba, NTP, NIS
Printing
Backup and Recovery
Using utilities for process control, locating files & automating maintenance tasks

Prerequisites:

Students should have an understanding of all basic UNIX commands as well as variable substitution, wild card expansion, command pipes, permissions, the grep and find commands.
These prerequisites can be met through completion of TN-125: Introduction to UNIX & Linux and six month’s experience with Linux.

Comments

Latest comments from students

User: flores2015

Instructor comments: Very Good Instructor (Bill Peterson)

Facilities comments: Nice - Can't wait for your new facility.

Liked the class? Then let everyone know!

RH-245: Linux System Administration I

Course Overview:

The System Administration I for Red Hat course is designed for IT professionals working to become full-time enterprise Linux system administrators. This course gives the student direct experience with the most essential system administration tasks in the Red Hat. You will be instructed in crucial system management skills including: configuring network interfaces, client set up of network protocols, managing local disk devices, installation, package management, performing system boot procedures, grub and controlling system processes.

Attendees to RH-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Installation
Manage File Systems and Local Disk Drives
Perform Mounts and Unmounts
Perform System Boot Procedures
Tuning and Maintaining the Kernel
Control System Processes
Perform User Administration
Installing and Managing Services
Perform Package Administration
Client Setup of SSH and Printing

Prerequisites:

TN-125: Introduction to UNIX and Linux

Comments

Latest comments from students

User: mlspence

Instructor comments: Bill was awesome! He did a fantastic job teaching the course mater to everyone in the class. He made sure everyone was able to keep up and that they understood the material before moving on. Thanks!

Facilities comments: They were great as well