PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-225: Network+ Skills Class

 

Course Overview:

TN-225: Network+ Skills Class is a five-day course that teaches students the fundamentals of networking. Through hands-on training, students learn the vendor-independent networking skills & concepts that affect all aspects of networking, such as installing & configuring the TCP/IP client. 

Attendees to the TN-225: Network+ Skills Class will receive TechNow approved course materials and expert instruction.

Please Note:  This course is designed with a focus on skills and is not a preparation course for certification.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:

  • Introduction Defining Networking
  • Building a Network with OSI
  • Hardware Concepts
  • Ethernet Basics
  • Modern Ethernet
  • Non-Ethernet Networks
  • Installing a Physical Network
  • Wireless Networking
  • Protocols
  • TCP/IP
  • Network Operating Systems
  • Sharing Resources
  • Going Large with TCP/IP
  • TCP/IP & the Internet
  • Remote Connectivity
  • Protecting Your Network
  • Interconnecting Network Operating Systems
  • The Perfect Server
  • Zen & the Art of Network Support

Prerequisites:

Comments

Latest comments from students

User: dsm

Instructor comments: great presentation

Facilities comments: too cold

User: fillyok

Instructor comments: He has an excellent way of explaining things on the level that anyone can understand easily. I wasn't looking forward to this class at all but I'm really glad I attended now. I have a much clearer understanding of networking fundamentals that I never would've received via CBTs. I'd heard really good things about Tim Burkard's teaching skills and now I know they're true. I wouldn't mind taking other classes that he teaches,

Facilities comments: The facilities are really nice and there weren't any problems as far as I could tell. The hotel staff is very nice.

 

Like the class?  Then let everyone know!

N-515: Implementing Cisco Enterprise Wireless Networks (ENWLSI)

Course Overview:

The Implementing Cisco Enterprise Wireless Networks (ENWLSI) course gives you the knowledge and skills needed to create a secure wireless network infrastructure and troubleshoot any related issues. You’ll learn how to implement and fortify a wireless network infrastructure using Cisco Identity Service Engine (ISE), Cisco Prime Infrastructure (PI), and Cisco Connect Mobile Experience to monitor and troubleshoot network issues.

Attendees to N-515: Implementing Cisco Enterprise Wireless Network (ENWLSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-430 Implementing Cisco Enterprise Wireless Networks (ENWLSI) exam, which is part of the CCNP® Enterprise certification and the Cisco Certified Specialist – Enterprise Wireless Implementation certification.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Implement network settings to provide a secure wireless network infrastructure
  • Implement a secure wireless client and troubleshoot wireless client connectivity issues
  • Implement and troubleshoot QoS in wireless networks
  • Implement and troubleshoot advanced capabilities in wireless network services

Prerequisites:

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-8155: HCISPP Preparation Seminar

 

Course Overview:

The HCISPP is the only certification that combines cybersecurity skills with privacy best practices and techniques. It demonstrates you have the knowledge and ability to implement, manage, and assess security and privacy controls to protect healthcare organizations using policies and procedures established by the cybersecurity experts at (ISC)2. TechNows HCISPP Certification Boot Camp is a comprehensive review of Healthcare cybersecurity with privacy best practices & industry best practices.

Attendees to TN-8155: HCISPP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction..

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Strategically focus your preparation for HCISPP Certification
  • Cover a broad spectrum of topics in the 7 domains of the HCISPP Common Body of Knowledge (CBK)
  • Gain knowledge on the Healthcare industry including third party relationships and health data management concepts
  • Identify applicable regulations, compliance frameworks, privacy principles and policies to protect information security
  • Develop risk management methodology and identify control assessment procedures

Audience:

  • The HCISPP certification is ideal for security professionals responsible for safeguarding protected health information (PHI). Take this HCISPP training course to prepare to manage and implement security controls for healthcare information. HCISPPs are instrumental to a variety of job functions: Compliance Officer, Information Security Manager, Privacy Officer, Compliance Auditor, Risk Analyst, Medical Records Supervisor, IT Manager, Privacy & Security Consultants, and Health Information Manager.

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

TN-939: Hacker Techniques, Exploits, and Incident Handling Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the exam.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations. The course concludes with exercising real attack strategies to demonstrate the techniques acquired throughout the course.

Attendees to TN-939:  Hacker Techniques, Exploits, and Incident Handling will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 9 days

Course Objectives:

  • Backdoors & Trojan Horses
  • Buffer Overflows
  • Covering Tracks: Networks
  • Covering Tracks: Systems
  • Denial of Service Attacks
  • Exploiting Systems Using Netcat
  • Format String Attacks
  • Incident Handling Overview and Preparation
  • Incident Handling Phase 2: Identification
  • Incident Handling Phase 3: Containment
  • Incident Handling: Recovering and Improving Capabilities
  • IP Address Spoofing
  • Network Sniffing
  • Password Attacks
  • Reconnaissance
  • Rootkits
  • Scanning: Host Discovery
  • Scanning: Network and Application Vulnerability scanning and tools
  • Scanning: Network Devices (Firewall rules determination, fragmentation, and IDS/IPS evasion)
  • Scanning: Service Discovery
  • Session Hijacking, Tools and Defenses
  • Types of Incidents
  • Virtual Machine Attacks
  • Web Application Attacks
  • Worms, Bots & Bot-Nets

Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: m_jurrens

Instructor comments: Both instructors Mr. Askey and Mr. Hackney, were very good. the open learning environment was extremely productive and I felt we all learned far more that we ever would out of a structured rote memorization course.

User: natebonds

Instructor comments: Both Mr. Askey and Hackney were extremely knowledgeable. They were also extremely interested in helping each student learn. I was particularly impressed with the way they tailored the course to optimize our time since we weren't testing. I feel like I know much much more than I did when the class started.

Facilities comments: The facilities were fine. I would have preferred it be closer to Lackland.

Liked the class?  Then let everyone know!