TN-575: Open Source Network Security Monitoring

 

Course Overview:

TN-575: Open Source Network Security Monitoring teaches students how to deploy, build, and run an NSM operation using open source software and vendor-neutral tools. No network is bullet proof and when attackers access your network, this course will show you how to build a security net to detect, contain, and control the attacker. Sensitive data can be monitored and deep packet and deep attachment analysis can be achieved. As organizations stand up a Security Operations Center (SOC) the enterprise NSM is the key ingredient to that SOC. This course not only teaches how to implement an NSM technologically, but how to effectively monitor an enterprise operationally. You will learn how to architect an NSM solution: where to deploy your NSM platforms and how to size them, stand-alone or distributed, and integration into packet analysis, interpret evidence, and integrate threat intelligence from external sources to identify sophisticated attackers. A properly implemented NSM is integral to incident response and provides the responders timely information to react to the incident. TN-575: Open Source Network Security Monitoring is a lab intensive environment with a cyber range that gives each student in-depth knowledge and practical experience monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls.

Attendees to TN-575: Open Source Network Security Monitoring class will receive TechNow approved course materials and expert instruction.

This Course is taught utilizing Security Onion or RockNSM as specified by the customer.

Dates/Locations:

No Events

Duration: 5 Days

Course Objective:

The focus of this course is to present a suite of Open Source security products integrated into a highly functional and scalable Network Security Monitoring solution.

Prerequisites:

Students should have a basic understanding of networks, TCP/IP and standard protocols such as DNS, HTTP, etc. Some Linux knowledge/experience is recommended, but not required

Course Outline:

  • Network Security Monitoring (NSM) Methodology
  • High Bandwidth Packet Capture Challenges
  • Installation of Security Onion
    • Use Cases (analysis, lab, stand-alone, distributed)
    • Resource Requirements
  • Configuration
    • Setup Phase I – Network Configuration
    • Setup Phase 2 – Service Configuration
    • Evaluation Mode vs. Configuration Mode
    • Verifying Services
  • Security Onion Architecture
    • Configuration Files and Folders
    • Network Interfaces
    • Docker Environment
    • Security Onion Containers
  • Overview of Security Onion Analyst Tools
    • Kibana
    • CapME
    • CyberChef
    • Squert
    • Sguil
    • NetworkMiner
  • Quick Review of Wireshark and Packet Analysis
    • Display and Capture Filters
    • Analyze and Statistics Menu Options
    • Analysis for Signatures
  • Analyzing Alerts
    • Replaying Traffic
    • 3 Primary Interfaces:
      • Squert
      • Sguil
      • Kibana
    • Pivoting Between Interfaces
    • Pivoting to Full Packet Capture
  • Snort and Surricata
    • Rule Syntax and Construction
    • Implementing Custom Rules
    • Implementing Whitelists and Blacklists
  • Hunting
    • Using Kibana to Slice and Dice Logs
    • Hunting Workflow with Kibana
  • Bro
    • Introduction and Overview
      • Architecture, Commands
    • Understanding and Examining Bro Logs
      • Using AWK, sort, uniq, and bro-cut
    • Working with traces/PCAPs
    • Bro Scripts Overview
      • Loading and Using Scripts
    • Bro Frameworks Overview
      • Bro File Analysis Framework FAF
    • Using Bro scripts to carve out more than files
  • RockNSM ( * If Applicable)
    •  Kafka
      • Installation and Configuration
      • Kafka Messaging
      • Brokers
      • Integration with Bro and FSF
    • File Scanning Framework FSF
      • Custom YARA Signatures
      • JSON Trees
      • Sub-Object Recursion
      • Bro and Suricata Integration
  • Elastic Stack
    • Adding new data sources in Logstash
    • Enriching data with Logstash
    • Automating with Elastalert
    • Building new Kibana dashboards
  • Production Deployment
    • Advanced Setup
    • Master vs Sensor
    • Node Types – Master, Forward, Heavy, Storage
    • Command Line Setup with sosetup.conf
    • Architectural Recommendations
    • Sensor Placement
    • Hardening
    • Administration
    • Maintenance
  • Tuning
    • Using PulledPork to Disable Rules
    • BPF’s to Filter Traffic
    • Spinning up Additional Snort / Suricata / Bro Workers to Handle Higher Traffic Loads

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW

Course Overview:

An in-depth course on how to use and configure Cisco Firepower Threat Defense technology,  from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT).  Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting.  This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.

It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.

Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
  • Configure the Firepower Management Center (FMC)
  • Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
  • Describe the Cisco Firepower Systems infrastructure
  • Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
  • Describe the System Configuration and Health policies and implement them
  • Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
  • Describe, create, and implement objects for use in Access Control policies
  • Create DNS and URL policies and configure Sinkholes
  • Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
  • Describe advanced policy configuration and Firepower system configuration options
  • Configure Malware Policies to find and stop Malware
  • Understand Security Intelligence, and how to configure SI to stop attacks NOW!
  • Configure policies to find and stop Ransomware
  • Understand how to fine tune IPS policies
  • Understand how to find tun Snort Preprocessor policies (NAP)
  • Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
  • Analyze events
  • Create reporting templates and schedule them
  • Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
  • Set up external authentication for users using LDAP/Realms
  • Configuring system integration, realms, and identity sources
  • Configure FMC domains and implement them
  • Configure FTD HA with two FTD devices
  • SSL Policy – decrypt your traffic
  • AnyConnect and Site-to-Site VPN
  • Understand network and host based AMP.  Configure and analyze host based AMP
  • Understand Cisco Identity Services Engine (ISE)
  • Configure ISE and integrate with Cisco FMC identity policy using PxGrid

Prerequisites:

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-125: Introduction to UNIX and Linux

 

Course Overview:

This hands-on course provides an intensive overview of fundamental UNIX commands that are common to all flavors of UNIX, but the focus is on RedHat. At the end of this course students will have a firm grasp of how the UNIX operating system works, how to accomplish powerful functions using multiple commands & most importantly of all, how to think UNIX. With the skills gained in this course, students can move on to RedHat System Administration I or Linux System Admnistration I.

Attendees of TN-125: Introduction to UNIX and Linux will receive course materials and expert Instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Unix Overview
  • Introduction to the UNIX command Line
  • Managing and controlling access to files
  • Batch Scripting and tools
  • Regular Expressions, Pipelines, and IO Redirection
  • Text File Manipulation
  • Basic Network Commands
  • Managing Unix Processes
  • GNOME Graphical Desktop

Prerequisites:

  • Basic Knowledge of Computers

Comments

Latest comments from students

User: trkdashin

Instructor comments: Very knowledgeable

Facilities comments: Nice Hotel

 

Liked the class?  Then let everyone know!

Cisco

Are you looking for a Cisco Training Course?

Your organization needs qualified professionals who can design, implement, and operate Cisco multiprotocol internet works.  With Cisco training from TechNow, you can gain the knowledge and experience your organization needs to succeed.

TechNow’s Cisco Training and Certification Career Path takes students from the fundamentals of networking through a complete line of Cisco courses designed to give students the knowledge and experience they need to master Cisco networking skills in a fast, thorough, and efficient manner.

Our Cisco training courses will prepare you for your work towards Cisco certification.  With years of experience in the Cisco training environment, TechNow can lead you through a dynamic experience to prepare you for Cisco certification.

A list of our Cisco Courses.

in   

TN-813: Certified in Governance, Risk and Compliance (CGRC)

 

Course Overview:

TN-813: Certified in Governance, Risk, and Compliance (CGRC) course is for the (ISC)²® Certified in Governance, Risk, and Compliance (CGRC) credential previously known as Certified Authorization Professional (CAP). This course walks the student through the Risk Management Framework following practices the NIST pubs. CGRC is an objective measure of the knowledge, skills and abilities required for personnel involved in the process of certifying and accrediting security of information systems. Specifically, this credential applies to those responsible for formalizing processes used to assess risk and establish security requirements. Their decisions will ensure that information systems possess security commensurate with the level of exposure to potential risk, as well as damage to assets or individuals.The CGRC credential is appropriate for civilian, state and local governments in the U.S., as well as commercial markets. CGRC certification applies to job functions such as authorization officials, system owners, information owners, information system security officers, and certifiers.  CGRC is crucial to the Management staff.

This course is the “why” of the entire security field. It provides a logical way of allocating resources where there is greatest risk and why we make the decisions we make in the field of security. It is TechNow’s view that of all the security courses we have seen, this course genuinely puts the “big picture” of security in front of the students. Students actually come to an understanding of truly what is critical to security of an enterprise versus a bunch of nuts and bolts of security.

TechNow’s CGRC course covers all of the (ISC)²® CGRC 7 Knowledge domains:

  • Security and Privacy Governance, Risk Management, and Compliance Program
  • Scope of the System
  • Selection and Approval of Framework, Security, and Privacy Controls
  • Implementation of Security and Privacy Controls
  • Assessment/ Audit of Security and Privacy Controls
  • System Compliance
  • Compliance Maintenance

RMF Related Steps

  • Prepare – Process Initiation
  • Categorize Information Systems
  • Establish the Security Control Baseline
  • Apply Security Controls
  • Assess Security Controls
  • Authorize Information System
  • Monitor Security Controls

TechNow’s CGRC Instructors have extensive knowledge and experience in the field, and have been working with organizations to build assessor teams for over 20 years.

Attendees to TN-813: Certified in Governance, Risk, and Compliance (CGRC) will receive TechNow authorized training materials, including access to the documentation of the CGRC Exam domains, and expert instruction.

Dates/Locations:

No Events

Duration: 3 Days

Course Objectives:

  • Initiate the Preparation Phase
  • Perform Execution Phase
  • Perform Maintenance Phase
  • Understand the Purpose of Security Authorization

Prerequisites:

  • IT Security
  • Information Assurance
  • Information Risk Management certification and systems administration
  • 1-2 years of general experience technical experience
  • 2 years of general systems experience
  • 1-2 years of Database/Systems Development/Network Experience
  • Information Security Policy Experience

Comments

Latest comments from students

Liked the class?  Then let everyone know!