PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-865: Wireshark Network Traffic and Security Analysis

Course Overview:

This course delivers the technical knowledge, insight, and hands-on training to receive in-depth knowledge on Wireshark® and TCP/IP communications analysis. You will learn to use Wireshark to identify the most common causes of performance problems in TCP/IP communications. You will learn about the underlying theory of TCP/IP and the most used application protocols, so that you can intelligently examine network traffic for performance issues or possible Indicators of Compromise (IoC).

Duration: 5 Days

Audience:

Anyone interested in learning to troubleshoot and optimize TCP/IP networks and analyze network traffic with Wireshark, especially network engineers, information technology specialists, and security analysts.

Course Prerequisites:

We recommend that attendees of this course have the following prerequisite:
• Network+

Dates/Locations: No Events

Course Outline:

DAY ONE

Course Set Up and Analyzer Testing

Network Analysis Overview
Wireshark Functionality Overview
Capturing Wired and Wireless Traffic
Define Global and Personal Preferences for Faster Analysis
Defined Time Values and Interpret Summaries
Interpret Basic Trace File Statistics to Identify Trends
Create and Apply Display Filters for Efficient Analysis

DAY TWO

Follow Streams and Reassemble Data
Use Wireshark’s Expert System to Identify Anomalies
TCP/IP Analysis Overview
Analyze Common TCP/IP Traffic Patterns

DAY THREE

Graph I/O Rates and TCP Trends
802.11 (WLAN) Analysis Fundamentals
Voice over IP (VoIP) Analysis Fundamentals
Network Forensics Fundamentals

DAY FOUR

Detect Scanning and Discovery Processes
Analyze Suspect Traffic

DAY FIVE

Use Command‐Line Tools

TN-979: Intrusion Analyst Course

Course Overview:

Intrusion Analyst is a hands-on course that covers intrusion detection in-depth. This includes concepts such as the use of Snort, network traffic analysis, and IDS signatures.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job. This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of packet and intrusion analysis.

Attendees to TN-979: Intrusion Analyst will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Advanced Snort Concepts
Analyst Toolkit
Domain Name System (DNS)
Examining Packet Crafting
Examining Packet Header Fields
Fragmentation
ICMP Theory
IDS Interoperability
IDS Patterns
IDS/IPS Management & Architecture Issues
Indications, Warnings & Traffic Correlation
IPv6
Microsoft Protocols
Network Traffic Analysis
NIDS Evasion, Instertion & Checksums
Snort Fundamentals & Configuration
Snort GUIs & Sensor Management
Snort Performance, Active Response & Tagging
Snort Rules
Stimulus Response
TCPdump Fundamentals
TCP/IP Fundamentals
Wireshark Fundamentals
Writing TCPdump Filters

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, Networking, and Security Experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: Tosha

Instructor comments: Dave was an excellent instructor. He is very informative and knowledgeable in the course and the material. I have enjoyed the class and I would take another course with him as the instructor.

Facilities comments: Very nice and clean hotel.

User: buckey26

Instructor comments: Dave was one of the best instructors I have ever had for a tech course. He broke down everything to the point where you can understand it internally.

Liked the class? Then let everyone know!

TN-8150: CISSP Certification Preparation Seminar

Course Overview:

TechNow's CISSP Certification Preparation Seminar is an accelerated course designed to meet the high demands of the information security industry by preparing students for the industry standard Certified Information Systems Security Professional exam. The exam covers (ISC)²'s 8 Domains from the Common Body of Knowledge, which encompass the whole of information security.

This course is an intense 10 day program that ensures the student passes the CISSP exam on the first try. We encourage our students to take the exam within a week after course completion. The goal for this course is a pass rate of one and done. Our high pass rate reflects the dedication of TechNow's students and our commitment to a ten day program that many in the industry do in 5 days. TechNow has a proven CISSP track record that you can depend on.

Attendees to TN-815: CISSP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time	Event
12/02/2024 - 12/13/2024 08:00 -16:00	TN-8150: CISSP Certification Preparation Seminar TechNow, Inc, San Antonio TX
02/03/2025 - 02/13/2025 08:00 -16:00	TN-8150: CISSP Certification Preparation Seminar TechNow, Inc, San Antonio TX

Duration: 10 Days

Course Objectives:

Our CISSP Professional training program covers the 8 Domains of the CBK in-depth with an emphasis on rigorous exam preparation.

Security and Risk Management (Security, Risk, Compliance, Law, Regulations, Business Continuity)
Asset Security (Protecting Security of Assets)
Security Engineering (Engineering and Management of Security)
Communications and Network Security (Designing and Protecting Network Security)
Identity and Access Management (Controlling Access and Managing Identity)
Security Assessment and Testing (Designing, Performing, and Analyzing Security Testing)
Security Operations (Foundational Concepts, Investigations, Incident Management, Disaster Recovery)
Software Development Security (Understanding, Applying, and Enforcing Software Security)

Prerequisites:

To qualify for this CISSP training program you must first qualify for the CISSP exam, which requires:

4 years of experience in the information security field
or 3 years experience & a college degree

Contact TechNow to verify that you qualify.

Comments

Latest comments from students

Facilities comments:

User: pulliamp

Instructor comments:

Liked the class? Then let everyone know!

RH-355: RHCSA Rapid Track Course

Course Overview:

The RHCSA Rapid Track Course is designed for experienced Linux® system administrators who want to expand their technical skill sets and become accredited with the Red Hat® Certified System Administration (RHCSA) certification. To successfully navigate this course, students should have experience with the Linux command line—including the necessary skills to execute common commands, such as cp, grep, sort, mkdir, tar, mkfs, ssh, and dnf—and be familiar with accessing man pages for help. At the completion of the course, students will be adequately prepared to take the RHCSA exam (EX200) .

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Introduce Linux and the Red Hat Enterprise Linux ecosystem.
Run commands and view shell environments.
Manage, organize, and secure files.
Manage users, groups and user security policies.
Control and monitor systemd services.
Configure remote access using the web console and SSH.
Configure network interfaces and settings.
Manage software using DNF
Access security files, file systems, and networks
Execute shell scripting and automation techniques
Manage storage devices, logical volumes, and file systems
Manage security and system access
Control the boot process and system services
Running containers