PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-813: Certified in Governance, Risk and Compliance (CGRC)

 

Course Overview:

TN-813: Certified in Governance, Risk, and Compliance (CGRC) course is for the (ISC)²® Certified in Governance, Risk, and Compliance (CGRC) credential previously known as Certified Authorization Professional (CAP). This course walks the student through the Risk Management Framework following practices the NIST pubs. CGRC is an objective measure of the knowledge, skills and abilities required for personnel involved in the process of certifying and accrediting security of information systems. Specifically, this credential applies to those responsible for formalizing processes used to assess risk and establish security requirements. Their decisions will ensure that information systems possess security commensurate with the level of exposure to potential risk, as well as damage to assets or individuals.The CGRC credential is appropriate for civilian, state and local governments in the U.S., as well as commercial markets. CGRC certification applies to job functions such as authorization officials, system owners, information owners, information system security officers, and certifiers.  CGRC is crucial to the Management staff.

This course is the “why” of the entire security field. It provides a logical way of allocating resources where there is greatest risk and why we make the decisions we make in the field of security. It is TechNow’s view that of all the security courses we have seen, this course genuinely puts the “big picture” of security in front of the students. Students actually come to an understanding of truly what is critical to security of an enterprise versus a bunch of nuts and bolts of security.

TechNow’s CGRC course covers all of the (ISC)²® CGRC 7 Knowledge domains:

  • Security and Privacy Governance, Risk Management, and Compliance Program
  • Scope of the System
  • Selection and Approval of Framework, Security, and Privacy Controls
  • Implementation of Security and Privacy Controls
  • Assessment/ Audit of Security and Privacy Controls
  • System Compliance
  • Compliance Maintenance

RMF Related Steps

  • Prepare – Process Initiation
  • Categorize Information Systems
  • Establish the Security Control Baseline
  • Apply Security Controls
  • Assess Security Controls
  • Authorize Information System
  • Monitor Security Controls

TechNow’s CGRC Instructors have extensive knowledge and experience in the field, and have been working with organizations to build assessor teams for over 20 years.

Attendees to TN-813: Certified in Governance, Risk, and Compliance (CGRC) will receive TechNow authorized training materials, including access to the documentation of the CGRC Exam domains, and expert instruction.

Dates/Locations:

No Events

Duration: 3 Days

Course Objectives:

  • Initiate the Preparation Phase
  • Perform Execution Phase
  • Perform Maintenance Phase
  • Understand the Purpose of Security Authorization

Prerequisites:

  • IT Security
  • Information Assurance
  • Information Risk Management certification and systems administration
  • 1-2 years of general experience technical experience
  • 2 years of general systems experience
  • 1-2 years of Database/Systems Development/Network Experience
  • Information Security Policy Experience

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies

 

Course Overview:

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies is the big picture overview of a SOC, other courses provide a deep dive into the technologies that a SOC may utilize. This course addresses the internal workings of staff, skills required, required authorizations, internal agreements, and setting appropriate expectation levels of a SOC within budget constraints. A SOC is not a one size fits all, the instructor has decades of security experience and brings to the table opportunities to discuss what can work within constraints. Many organizations are coming to the realization that some level of a SOC is now required and to learn just what decisions need to be made: Out-sourced, In-sourced, budgets, capabilities and many more. Students leave with a worksheet of how to progress when they get back to their organization.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies – Is a course that incorporates lecture, demos, and group exercises for standing up a Security Operations Center (SOC). Students learn strategies and resources required to deploy, build, and run Network Security Monitoring (NSM) and work roles and flows for a SOC. No network is bullet proof and when attackers access your network, this course will show you options and resources to build a security net to detect, contain, and control the attacker. Examples on what it takes to architect an NSM solution to identify sophisticated attackers and a response strategy. Properly implemented detection and response technologies is integral to incident response and provides the responders timely information and tools to react to the incident. Effective demonstrations are given of Open Source technologies that build up a SOC, but any software can be used and demonstrations are provided to demonstrate technology families not push a specific solution.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies demonstrations utilize a cyber range that gives each student in-depth knowledge of monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls; and software and services to provide orchestrate Incident Response, Intelligence Analysis, and Hunt Operations.

Attendees to TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies class will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 2 Days

Course Objective:

    • To provide management an overview of what it takes to stand up a SOC.

Prerequisites:

  • Students should have an understanding of the security field.

Course Outline:

  • What threats does my organization care about?
  • What does a threat look like?
  • What does a threat look like?
  • How to present the SOC internally.
  • Communication with Stakeholders and Executives
    • Leveraging and integrating existing security measures
  • People
    • Establishing a skill matrix and work roles for SOC members
    • Establishing a training path
    • Personnel background requirementsProcesses
  • Processes
    • Alignment to standards: NIST, PCI, HIPAA, etc.
    • Risk related decision trees
    • Playbooks
    • Threat Intelligence Integration
  • Technology – Tool Suites to Support:
    • Ethical Hacking
    • Network Security Monitoring and SIEM
    • Forensics
    • Dashboards
    • Analysis and Hunting
    • Incident Management and Ticketing

 

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

CT-225: Network+

 

Course Overview:

CT-225: Network+ is a five-day course that teaches students the fundamentals of networking. Through hands-on training, students learn the vendor-independent networking skills & concepts that affect all aspects of networking, such as installing & configuring the TCP/IP client. The course also helps to prepare students for three popular certification examinations: CompTIA Network+, Microsoft Networking Essentials, and Novell Networking Technologies.

Attendees to CT-225: Network+ will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:

  • Identify basic network theory concepts and major network communications methods
  • Describe bounded network media
  • Describe unbounded network media
  • Identify the major types of network implementations
  • Identify TCP/IP addressing and data delivery methods
  • Analyze routing and switching technologies
  • Identify the components of a TCP/IP implementation
  • Analyze network security
  • Implement network security
  • Identify the components of a WAN implementation
  • Identify the components used in cloud computing and virtualization
  • Identify the components of a remote network implementation
  • Manage networks
  • Troubleshoot network issues

Prerequisites:

Comments

Latest comments from students

User: hanbri9

Instructor comments: Great instructor.

Facilities comments: BEST HOTEL!!!!!!! AMAZING LOCATION, GOOD FOOD, NICE SPACE. The location of the hotel is what is almost the best about it. Driving up hwy 10 in the morning is absolutely awful.

 

Like the class?  Then let everyone know!

PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!