CT-405: PenTest+

 

 

 

 

 

 

Course Overview:

PenTest+ is an intermediate-level certification for cybersecurity professionals who are tasked with penetration testing to identify, exploit, report, and manage vulnerabilities on a network. PenTest+ is at the same certification level as CT-395: CySA+. Depending on your course of study, PenTest+ and CySA+ can be taken in any order, but typically follow the skills learned in CT-325: Security+. PenTest+ focuses on offense through penetration testing and vulnerability assessment while CySA+ focuses on defense through incident detection and response. The most qualified cybersecurity professionals have both offensive and defensive skills. Attend Tech Now training for hands-on, instructor led course to prepare you for the CompTIA PT0-002 exam. This exam is hands-on, performance-based questions and multiple choice, to ensure each candidate possesses the skills, knowledge, and ability to perform tasks on systems.

 

 

 

 

What’s Included:

  • 5 days of instructor led in classroom training
  • Labs
  • PenTest+ Courseware
  • Exam Voucher
  • PenTest+ onsite exam scheduling

Course Objectives:

  • Plan and scope penetration tests
  • Conduct passive reconnaissance
  • Perform non-technical tests to gather information
  • Conduct active reconnaissance
  • Analyze vulnerabilities
  • Penetrate networks
  • Exploit host-based vulnerabilities
  • Test application
  • Complete post-exploit tasks
  • Analyze and report pen test results

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

    • Module 01. Planning and Scoping Penetration Tests
    • Module 02. Conducting Passive Reconnaissance
    • Module 03. Performing Non-Technical Tests
    • Module 04. Conducting Active Reconnaissance
    • Module 05. Analyzing Vulnerabilities
    • Module 06. Penetrating Networks
    • Module 07. Exploiting Host-Based Vulnerabilities
    • Module 08. Testing Applications
    • Module 09. Completing Post-Exploit Tasks
    • Module 10. Analyzing and Reporting Pen Test Results

 

Prerequisites:

Target Audience:

This course is designed for cybersecurity professionals tasked with penetration testing and vulnerability management.

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-979: Intrusion Analyst Course

Course Overview:

Intrusion Analyst is a hands-on course that covers intrusion detection in-depth. This includes concepts such as the use of Snort, network traffic analysis, and IDS signatures.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of packet and intrusion analysis.

Attendees to TN-979: Intrusion Analyst will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Advanced Snort Concepts
  • Analyst Toolkit
  • Domain Name System (DNS)
  • Examining Packet Crafting
  • Examining Packet Header Fields
  • Fragmentation
  • ICMP Theory
  • IDS Interoperability
  • IDS Patterns
  • IDS/IPS Management & Architecture Issues
  • Indications, Warnings & Traffic Correlation
  • IPv6
  • Microsoft Protocols
  • Network Traffic Analysis
  • NIDS Evasion, Instertion & Checksums
  • Snort Fundamentals & Configuration
  • Snort GUIs & Sensor Management
  • Snort Performance, Active Response & Tagging
  • Snort Rules
  • Stimulus Response
  • TCPdump Fundamentals
  • TCP/IP Fundamentals
  • Wireshark Fundamentals
  • Writing TCPdump Filters

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: Tosha

Instructor comments: Dave was an excellent instructor. He is very informative and knowledgeable in the course and the material. I have enjoyed the class and I would take another course with him as the instructor.

Facilities comments: Very nice and clean hotel.

User: buckey26

Instructor comments: Dave was one of the best instructors I have ever had for a tech course. He broke down everything to the point where you can understand it internally.

Liked the class?  Then let everyone know!

TN-125: Introduction to UNIX and Linux

 

Course Overview:

This hands-on course provides an intensive overview of fundamental UNIX commands that are common to all flavors of UNIX, but the focus is on RedHat. At the end of this course students will have a firm grasp of how the UNIX operating system works, how to accomplish powerful functions using multiple commands & most importantly of all, how to think UNIX. With the skills gained in this course, students can move on to RedHat System Administration I or Linux System Admnistration I.

Attendees of TN-125: Introduction to UNIX and Linux will receive course materials and expert Instruction.

Date/Locations:

Date/Time Event
10/07/2024 - 10/11/2024
08:00 -16:00 		TN-125: Intro to UNIX and Linux
TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

  • Unix Overview
  • Introduction to the UNIX command Line
  • Managing and controlling access to files
  • Batch Scripting and tools
  • Regular Expressions, Pipelines, and IO Redirection
  • Text File Manipulation
  • Basic Network Commands
  • Managing Unix Processes
  • GNOME Graphical Desktop

Prerequisites:

  • Basic Knowledge of Computers

Comments

Latest comments from students

User: trkdashin

Instructor comments: Very knowledgeable

Facilities comments: Nice Hotel

 

Liked the class?  Then let everyone know!

TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class?  Then let everyone know!

CL-355: Containers, Kubernetes, and Red Hat OpenShift Administration

 

Course Overview:

Through an introduction to Docker, Kubernetes, and Red Hat OpenShift Platform, this training course helps you understand one of the key tenets of the DevOps and DevSecOps Platform (DSOP) movement: continuous integration and continuous deployment. The CI/CD pipeline becomes well understood and implemented in an open architecture.  Containers have become a key technology for the configuration and deployment of applications and micro services. Kubernetes is a container orchestration platform that provides foundational services in Red Hat OpenShift Container Platform, which allows enterprises to manage container deployments and scale their applications using Kubernetes.

This training course provides an overview of the DoD Enterprise DevSecOps Platform (DSOP) Reference Design, its current state, and ties to DoD Cloud Platform One (P1). Workflows of the DoD Iron Bank container repository are introduced, along with an overview of the DoD Pipeline as represented in Big Bang.  Continuous authorization cATO via Party Bus within NIST RMF is presented. You will become aware of the Platform One (P1) integrations and relationship to Docker, Kubernetes, Istio (Red Hat OpenShift Service Mesh) and Red Hat OpenShift Platform.

In addition to gaining an understanding of these tools, you will build core administration skills through the installation, configuration, and management of an OpenShift cluster and containerized applications.

Course Objectives:

  • Learn about Containers, Docker, Kubernetes, and OpenShift architecture
  • Overview DoD Enterprise DevSecOps Platform (DSOP) Reference Design and DoD Cloud Platform One (P1)
  • Tie together awareness of various DoD Cloud offerings and their relationships
  • Create containerized services
  • Manage containers and container images
  • Deploy multi-container applications
  • Install an OpenShift cluster
  • Configure and manage masters and nodes
  • Secure OpenShift
  • Control access to resources on OpenShift
  • Monitor and collect metrics on OpenShift
  • Deploy applications on OpenShift using source-to-image (S2I)
  • Manage storage on OpenShift

Course Outline:

  • Getting started with container technology
  • Creating containerized services
  • Managing containers
  • Managing container images
  • Creating custom container images
  • Deploying containerized applications on OpenShift
  • Deploying multi-container applications
  • Troubleshooting containerized applications
  • Comprehensive Review of Introduction to Container, Kubernetes, and RedHat OpenShift
  • Introducing Red Hat OpenShift Container Platform
  • Installing OpenShift Container Platform
  • Describing and exploring OpenShift networking concepts
  • Executing commands
  • Controlling access to OpenShift resources
  • Allocating persistent storage
  • Managing application deployments
  • Installing and configuring the metrics subsystem
  • Managing and monitoring OpenShift Container Platform

Dates/Locations:

No Events

Duration: 5 Days

Prerequisites:

  • Ability to use a Linux® terminal session and issue operating system commands
  • Good foundation in Linux
  • Experience with web application architectures and their corresponding technologies

Target Audience:

  • Developers who wish to containerize software applications
  • Administrators who are new to container technology and container orchestration
  • Architects who are considering using container technologies in software architectures
  • System administrators
  • System architects
  • Architects and developers who want to install and configure OpenShift Container Platform
  • Those working in the field of DevSecOps supporting DoD Platform One (P1) and other implementations

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!